Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Elektrická bezpečnost: Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Pouze pro vnitřní použití: This fixture is designed for indoor use.
• Voděodolnost: The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• Nestmívatelné: This LED ceiling light is není stmívatelná. Do not connect it to a dimmer switch, as this may damage the fixture.
• Teplo: I když LED světla produkují méně tepla než tradiční žárovky, zajistěte dostatečné větrání kolem svítidla.
• Děti: Keep packaging materials away from children to avoid danger of suffocation.

2. Konec produktuview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Model: PR1500035-WW
• Velikost: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Moc: 24 wattů
• Jas: 2400 XNUMX lumenů
• Teplota barev: 3000 Kelvin (Soft Warm White)
• Voděodolnost: IP54 (vodotěsný a prachotěsný)
• Životnost: Více než 20,000 XNUMX hodin
• Materiál: Plast
• CRI: >80 (Color Rendering Index)
• Ekvivalent: Approximately 200W incandescent equivalent.
• Energetická účinnost: Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Instalační příručka

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Vypnout napájení: Vyhledejte jistič ovládající svítidlo a vypněte napájení. Ověřte, zda je napájení vypnuto pomocí regulátoru hlasitosti.tage tester.
2. Demontáž montážní konzoly: Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp tělo.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Instalace montážního držáku:
   • Pro dřevěný strop: Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • For Junction Box: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Příprava zapojení: Open the waterproof wiring compartment on the light fixture.
6. Připojit dráty: Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Bezpečné zapojení: Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Namontujte Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Obnovit napájení: Znovu zapněte napájení na jističi.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Návod k obsluze

This Lepro LED Ceiling Light is designed for simple operation.

• Zapnutí/vypnutí: K zapnutí nebo vypnutí svítidla použijte standardní nástěnný vypínač.
• Nestmívatelné: As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Údržba

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Čištění: Před čištěním se ujistěte, že je přístroj vypnutý. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Bez výměny žárovky: The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Inspekce: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Řešení problémů

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Specifikace

8. Záruka a podpora

This Lepro LED Ceiling Light comes with a 2-letá záruka od výrobce.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visit the Lepro Store