PERLESMITH PSSFK1-E

PERLESMITH Full Motion TV Wall Mount (PSSFK1-E)

Návod k použití

Zavedení

Thank you for choosing the PERLESMITH Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new TV wall mount. Please read these instructions thoroughly before installation and retain them for future reference.

Bezpečnostní informace

VAROVÁNÍ: Nepřečtení a nedodržení všech pokynů může vést k úrazu osob, poškození majetku nebo ke ztrátě záruky. Nesprávná instalace může vést k vážnému zranění nebo poškození.

  • Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a displeje.
  • Nepřekračujte maximální nosnost 20 kg (44 liber).
  • Tento držák je určen pro televizory s úhlopříčkou od 13 do 42 palců.
  • Verify VESA compatibility (75x75mm, 100x100mm, 200x100mm, 200x200mm) before installation.
  • Install only on solid wood studs, concrete walls, or brick walls. NE mount onto drywall alone, hollow walls, or soft walls.
  • Během instalace používejte vhodné bezpečnostní pomůcky, včetně ochrany očí.
  • Always use two people for lifting and positioning the TV.
  • Pravidelně kontrolujte všechny spoje a spojovací prvky, abyste zajistili jejich bezpečné utažení.

Obsah balení

Before installation, please verify that all components are present and undamaged. If any parts are missing or defective, contact PERLESMITH customer service.

  • Montáž nástěnného držáku televizoru
  • Mounting Hardware Kit (various screws, anchors, washers, spacers)
  • Šablona instalace
  • Návod k použití

Nastavení a instalace

The PERLESMITH TV wall mount is designed for quick and straightforward installation. Follow these steps carefully.

1. Check TV Compatibility and Wall Type

Ensure your TV's size (13-42 inches), weight (max 20kg), and VESA pattern (75x75, 100x100, 200x100, 200x200mm) are compatible with this mount. Identify your wall type (wood stud, concrete, or brick) to use the correct hardware.

Image showing VESA compatibility and weight capacity for the TV mount.

This image illustrates the VESA compatibility (75x75, 100x100, 200x100, 200x200mm) and the maximum weight capacity of 20kg for the PERLESMITH TV wall mount. It also shows a TV mounted in a corner, indicating flexible placement options.

2. Připevněte držáky televizoru k televizoru

Carefully place your TV face down on a soft, clean surface. Attach the TV brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are securely fastened and centered.

3. Mount Wall Plate to Wall

Using the provided template, mark the drilling locations on your wall. Drill pilot holes according to the instructions for your specific wall type. Securely fasten the wall plate to the wall using the appropriate anchors and screws. Ensure the wall plate is level and firmly attached.

Image showing two people installing a TV mount on a wall, with icons for brick, concrete, and wood stud walls.

This image demonstrates the ease of installation, showing two individuals mounting a TV. It highlights compatibility with brick, concrete, and wood stud walls, and indicates a typical installation time of 15 minutes. A warning against mounting on drywall alone is also present.

4. Zavěste televizi na nástěnnou desku

With assistance, carefully lift the TV with the attached brackets and hook it onto the wall plate. Ensure the TV is securely seated on the mount. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.

Návod k obsluze

Your PERLESMITH Full Motion TV Wall Mount offers flexible viewmožnosti ing po instalaci.

Nastavení úhlu natočení

The mount allows for a swivel of up to 90 degrees left or right. Gently push or pull the TV to achieve your desired viewing angle. This flexibility helps eliminate glare and provides optimal viewing from various positions in the room.

Image illustrating the swivel capability of the TV wall mount, showing a TV swiveling 90 degrees.

This image demonstrates the 'Viewing Flexibility' of the mount, showing how the TV can swivel up to ±90 degrees to adjust the viewúhel.

Nastavení úhlu náklonu

The mount can be tilted 5 degrees upwards and 15 degrees downwards. This feature helps reduce neck and eye strain by allowing you to find the most comfortable viewing position and minimize reflections.

Image showing a person adjusting the tilt of a TV mounted on the wall, with tilt angles indicated.

This image highlights 'Comfortable Viewing' by illustrating the tilt function of the mount, allowing for +5 degrees upward tilt and -15 degrees downward tilt to optimize the viewúhel.

Vysouvání a zasouvání

The mount can extend up to 362mm (14.25 inches) from the wall and retract to a minimum distance of 69mm (2.7 inches). This allows for space-saving when retracted and provides greater flexibility for viewing or accessing cables when extended.

Image showing the TV mount extended and retracted, with measurements for extension and minimum distance from the wall.

This image demonstrates the 'Extend and Retract' feature, showing the mount extending up to 362mm from the wall and retracting to a compact position, with a minimum distance of 40mm (note: product description states 69mm, image shows 40mm, using description value in text).

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

  • Pravidelně kontrolujte všechny šrouby a vruty, abyste se ujistili, že jsou pevně utažené a bezpečné.
  • Zkontrolujte držák, zda nevykazuje známky opotřebení, poškození nebo koroze.
  • Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Do not hang additional items on the mount or TV.

Odstraňování problémů

Pokud narazíte na problémy s nástěnným držákem televizoru, podívejte se na následující běžné problémy a jejich řešení.

  • Televizor není vodorovně umístěn: Check the wall plate installation for levelness. Some mounts allow for minor post-installation leveling adjustments.
  • Držák se zdá být uvolněný: Re-tighten all mounting screws on both the wall plate and the TV brackets. Ensure the wall anchors are properly installed for your wall type.
  • Difficulty adjusting movement: Check for any overtightened bolts on the articulating arms. Some joints may have adjustable tension screws.
  • Chybějící části: Contact PERLESMITH customer support for replacement parts. Do not attempt to use non-approved parts.

Specifikace

Číslo modeluPSSFK1-E
ZnačkaPERLESMITH
Kompatibilní velikosti TV13 - 42 palců (33 cm - 106 cm)
Maximální nosnost20 kg (44 lb)
Kompatibilita VESA75x75mm, 100x100mm, 200x100mm, 200x200mm
Úhel náklonu+5° / -15°
Úhel otočení±90°
Prodloužení od zdi69 mm (zasunutý) až 362 mm (vysunutý)
MateriálLegovaná ocel
Typ montážeDržák na zeď
Kompatibilní zařízeníMonitor, Televize

Záruka a podpora

PERLESMITH stands behind the quality of its products. For warranty information, technical support, or assistance with installation, please contact PERLESMITH customer service through the retailer where you purchased the product or visit the official PERLESMITH webmísto.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

© 2023 PERLESMITH. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.