1. Konec produktuview
The Steinel XSolar LH-N LED Solar Light is an advanced, self-sufficient lighting solution designed for illuminating house numbers. It features an integrated solar panel, a powerful lithium Ferrum battery, and an intelligent microprocessor control system. This system ensures automatic illumination of your house number from dusk until dawn, without requiring an external power connection. The monocrystalline glass solar panel efficiently charges the battery even under cloudy conditions, providing reliable operation throughout the year. The unit is constructed from high-quality, weather-resistant materials, including UV-resistant plastic, and features a splash-proof housing (IP 44) for durability.
2. Nastavení a instalace
2.1 Obsah balení
- Steinel XSolar LH-N LED Solar Light unit
- Mounting material (3 x screws, 3 x dowels)
- House number sheet (for custom numbering)
- Návod k použití
2.2 Výběr místa instalace
Select a location on an exterior wall that receives direct sunlight for the majority of the day. Optimal solar charging is crucial for the light's performance, especially during shorter winter days or prolonged cloudy periods. Avoid areas shaded by trees, overhangs, or other structures.
Obrázek 1: Přední strana view of the Steinel XSolar LH-N LED Solar Light with an example house number. The integrated solar panel is visible at the top.
2.3 Montáž jednotky
- Opatrně vybalte všechny součásti.
- Determine the desired mounting height and position. Ensure the solar panel is unobstructed.
- Mark the drilling points on the wall using the light unit as a template.
- Drill holes at the marked points. Insert the provided dowels into the drilled holes.
- Secure the light unit to the wall using the provided screws.
- Apply the desired house numbers from the supplied sheet onto the designated area of the light. Ensure they are centered and firmly adhered.
Figure 2: Dimensional drawing showing the height (227 mm), width (242 mm), and depth (50 mm) of the light unit.
3. Provoz
3.1 Automatická funkcionalita
The Steinel XSolar LH-N is designed for fully automatic operation. It features a twilight switch that detects ambient light levels. The LED light will automatically turn on at dusk when light levels fall below a certain threshold and turn off again at dawn when sufficient natural light is present.
3.2 Intelligent Brightness Control
The integrated intelligent microprocessor control, in conjunction with the powerful lithium Ferrum battery, optimizes light output to ensure 365 days of illumination per year. This system manages power consumption to maximize battery life and consistent performance.
Figure 3: The XSolar LH-N light unit installed on a wall, clearly illuminating the house number in the dark.
Obrázek 4: Širší view of the XSolar LH-N light unit illuminating a house number on a modern building at night.
4. Údržba
4.1 Čištění
To ensure optimal performance, periodically clean the solar panel and the light's surface. Dust, dirt, and debris can reduce the efficiency of the solar panel. Use a soft, damp cloth to gently wipe the surfaces. Avoid abrasive cleaners or harsh chemicals, as these can damage the unit.
4.2 Životnost LED diod
The integrated LED cooling system ensures an extended LED service life of approximately 50,000 hours. This translates to about 30 years of operation at 4.5 hours per day, meaning no maintenance or bulb changes are typically required for the LED light source itself.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se v noci nerozsvítí. | Nedostatečné solární nabití. | Ensure the solar panel is clean and receives direct sunlight for several hours daily. Relocate if necessary. |
| Světlo je tlumené nebo svítí jen krátkou dobu. | Baterie není plně nabitá nebo je stárnoucí. | Allow several days of full sun exposure for the battery to charge. If the problem persists after extended charging, the battery may need replacement (contact support). |
| Světlo zůstává svítit během dne. | Twilight sensor obstructed or faulty. | Check if anything is blocking the twilight sensor. Ensure the sensor area is clean. |
6. Technické specifikace
- Model: Steinel XSolar LH-N
- Číslo položky: 035730
- Rozměry (V x Š x H): 22.7 x 24.2 x 5.1 cm
- Hmotnost: 0.7 kg
- Baterie: Lithium Ferrum (LiFe) 2500 mAh
- Typ světla: LED
- LED Service Life: Přibližně 50,000 hodiny
- Materiál: UV-resistant Plastic
- Barva: Dřevěné uhlí
- Třída ochrany: IP44 (odolné proti stříkající vodě)
- Okolní teplota: -20°C až +40°C
- Typ montáže: Držák na zeď
7. Informace o záruce
Steinel products are manufactured to the highest quality standards. For specific warranty terms and conditions applicable to your region, please refer to the documentation included with your purchase or visit the official Steinel webUschovejte si doklad o koupi pro případ reklamace.
8. Zákaznická podpora
Should you encounter any issues or have questions regarding your Steinel XSolar LH-N LED Solar Light, please contact Steinel customer support. You can find contact details on the official Steinel webna webu nebo prostřednictvím místního distributora.
Webmísto: www.steinel.de/en/ (Napřample, skutečný URL may vary by region)