Adonit Dash 3 Universal Stylus Instruction Manual

1. Úvod

The Adonit Dash 3 is a universal rechargeable active fine-point digital stylus designed for use with most capacitive touchscreens, including iPhones, Android phones, iPads, tablets, and laptops. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Dash 3 stylus to ensure optimal performance.

Image 1.1: The Adonit Dash 3 Stylus in Black.

2. Konec produktuview

The Adonit Dash 3 offers a seamless and precise writing experience. Key features include:

• Tip Fine Point: The improved 1.9mm PixelPoint tip provides a precise and responsive feel, mimicking writing on paper.
• Okamžitá aktivace: Simply click the button once to turn on the stylus. No Bluetooth pairing is required, allowing for immediate use with any note-taking, drawing, or sketching app.
• Integrated Carrying Clip: A classic pen-clip design allows for secure and convenient portability.
• Univerzální kompatibilita: Works with a wide range of iOS and Android capacitive touchscreens, including various models of iPhone, iPad, Samsung Galaxy, Pixel, HTC, LG, Dell, and more.
• Dobíjecí baterie: Provides up to 14 hours of continuous use on a single charge. Recharges fully in approximately 45 minutes.

Image 2.1: Labeled diagram highlighting the design features of the Adonit Dash 3 stylus.

3. Nastavení

3.1 Rozbalení

Po otevření balení se ujistěte, že jsou přítomny všechny součásti:

• Adonit Dash 3 Stylus
• USB nabíječka

Image 3.1: The Adonit Dash 3 stylus and its included USB charger.

3.2 Počáteční poplatek

Before first use, fully charge your Dash 3 stylus.

1. Connect the included USB charger to a power source (e.g., computer USB port, power bank, USB wall adapter).
2. Attach the magnetic end of the charger to the charging port at the top of the stylus.
3. The LED indicator on the stylus will show a red light during charging.
4. Once fully charged (approximately 45 minutes), the LED light will turn green.

Image 3.2: The Adonit Dash 3 stylus connected to its magnetic USB charger, plugged into a laptop.

3.3 Zapnutí/vypnutí

To power on the Dash 3, simply click the button located at the top of the stylus. The LED light will illuminate blue. To power off, click the button again.

Image 3.3: Activating the Adonit Dash 3 stylus by pressing the power button.

4. Návod k obsluze

4.1 Základní použití

The Adonit Dash 3 is designed for immediate use without complex setup:

1. Ensure the stylus is powered on (blue LED).
2. Open any note-taking, drawing, or sketching application on your compatible device.
3. Begin writing, drawing, or navigating your device's interface as you would with a traditional pen or your finger.

Image 4.1: The fine 1.9mm PixelPoint tip of the Adonit Dash 3 stylus.

4.2 Používání s aplikacemi

The Dash 3 enhances interaction with various applications. Below are examples of its use with creative and productivity apps:

5. Nabíjení

The Dash 3 features a built-in rechargeable Lithium Polymer battery. Follow these steps to charge your stylus:

1. Locate the magnetic charging port at the top of the stylus.
2. Connect the magnetic USB charger to the stylus.
3. Plug the USB end of the charger into any standard USB power source.
4. The LED indicator will glow red while charging.
5. When charging is complete, the LED indicator will turn green.
6. A full charge takes approximately 45 minutes and provides up to 14 hours of continuous use.

6. Kompatibilita

The Adonit Dash 3 is universally compatible with most capacitive touchscreens. This includes, but is not limited to, the following devices:

• iPady: iPad mini 6, iPad mini 5, iPad 8, iPad 7, iPad 6, iPad 5, iPad 4, iPad 3, iPad Pro 11 & 12.9 (2018-2021)
• iPhony: iPhone 13, iPhone Pro, iPhone Pro Max, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone X, iPhone XR, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5, iPhone 5c, iPhone 5s
• Zařízení Android: Android LG G5, HTC 10, HTC Bolt, LG V20, Pixel, Samsung Galaxy S7 Edge, Pixel C, Nvidia Shield Tablet K1, Samsung Galaxy Tab, Sony Xperia Z4, and other popular Android phones and tablets.

Image 6.1: The Adonit Dash 3 stylus demonstrating compatibility with both Android and iOS tablets.

7. Údržba

Proper care will extend the life of your Adonit Dash 3 stylus:

• Čištění: Use a soft, dry cloth to wipe the stylus body. Avoid abrasive cleaners or solvents.
• Péče o hroty: The PixelPoint tip is durable but can be damaged by excessive force or drops. Avoid pressing too hard on the screen.
• Skladování: Store the stylus in a safe place when not in use, ideally clipped to a notebook or pocket, to prevent damage.
• Nabíjení: Do not leave the stylus connected to the charger for extended periods after it is fully charged.

8. Řešení problémů

If you encounter issues with your Adonit Dash 3, try the following steps:

• Stylus Not Turning On: Ensure the stylus is fully charged. Connect it to the USB charger and wait for the green LED indicator.
• Stylus nereaguje: Make sure the stylus is powered on (blue LED). If it is, try turning it off and on again. Ensure your device's screen is clean and free of debris.
• Nepřesný vstup: Check if the stylus tip is clean. Sometimes, a dirty screen or tip can affect accuracy.
• Problémy s nabíjením: Verify that the USB charger is securely connected to both the stylus and the power source. Try a different USB port or power adapter.
• Intermittent Disconnection: While the Dash 3 does not use Bluetooth, ensure there are no strong electromagnetic interferences nearby that might affect capacitive touch.

9. Specifikace

10. Záruka a podpora

Adonit provides a 12-month warranty for the Dash 3 stylus and its parts, ensuring quality and durability. For further assistance or warranty claims, please refer to the official Adonit support channels.

Popis záruky: 1 rok