Návod k obsluze bezdrátového dálkového ovladače s intervalovým časovačem VILTROX JY-710-C1 s LCD displejem

Zavedení

The VILTROX JY-710-C1 is a versatile wireless LCD interval timer and shutter release remote control designed for various Canon cameras. This device enables precise control over camera shutter functions, including single shot, continuous shooting, Bulb mode, customized delay, and timed interval shooting. It is particularly useful for specialized photography such as capturing starry skies, night views, or time-lapse sequences. The remote features low power consumption and a clear LCD display for monitoring settings and timer plans.

Image: The VILTROX JY-710-C1 wireless remote control and its receiver unit.

Vlastnosti produktu

• Bezdrátový provoz: Provides flexibility and reduces camera shake.
• Multi-functional Timer: Supports Delay/Self Timer, Interval Timer, Bulb/Long Exposure, and Exposure Count modes.
• LCD displej: Clear screen for easy setting and monitoring of timer parameters.
• Nízká spotřeba energie: Určeno pro delší použití.
• Uvolnění závěrky: Functions as a standard wired or wireless shutter release.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Timer Remote Control x1
• Přijímač x1
• Shutter Release Cable x1
• Anglický návod k obsluze x1

Kompatibilita

The VILTROX JY-710-C1 is compatible with the following Canon EOS camera models:

• EOS 80D, 77D, 70D, 60D, 60Da
• EOS 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D
• EOS 200D, 100D, 1300D, 1200D, 1100D, 1000D
• EOS M5, M6

Nastavení

1. Instalace baterie

The remote control and receiver require batteries (not included). Open the battery compartment on the back of both units and insert the specified battery type, ensuring correct polarity. Close the compartments securely.

2. Připojení přijímače k ​​fotoaparátu

1. Locate the remote control terminal on your camera. This is typically a small port on the side of the camera body.
2. Connect one end of the provided shutter release cable to the receiver unit.
3. Připojte druhý konec kabelu spouště závěrky k portu dálkového ovládání fotoaparátu.
4. The receiver can be mounted on the camera's hot shoe or placed nearby.

Image: Demonstrates connecting the receiver unit to the camera's remote port.

3. Párování a nastavení kanálů

Ensure both the remote control and receiver are powered on. If necessary, set both units to the same channel to establish a wireless connection. Refer to the specific instructions on the device's LCD for channel selection, usually involving a 'CH' setting.

Image: The remote control being used while connected to a camera on a tripod.

Návod k obsluze

Obecné ovládací prvky

• Tlačítko SET: Used to confirm selections and enter settings menus.
• Směrová tlačítka: Procházení možností nabídky a úprava hodnot.
• Tlačítko LOCK: Zabraňuje nechtěným změnám nastavení.
• Tlačítko START/STOP ČASOVAČE: Initiates or halts the timer sequence.
• Tlačítko spouště: Functions as a standard two-stage shutter button (half-press for focus, full-press for shutter).

Delay / Self Timer (DELAY)

This function operates similarly to your camera's self-timer. You can set a delay period in 1-second increments, up to a maximum of 99 hours, 99 minutes, and 99 seconds. After the delay, the shutter will be released.

Interval Timer (INTVL)

The Interval Timer allows you to set a specific time period between exposures, up to 100 hours. For example, if set to 10 minutes, an exposure will be taken every 10 minutes until the set exposure count is reached or manually stopped. This is ideal for time-lapse photography.

BULB / Long Exposure (LONG)

This mode enables long exposures, allowing the shutter to remain open for an extended duration, up to 100 hours. This is essential for low-light photography or capturing light trails.

Exposure Count (N)

The Exposure Count setting allows you to specify the total number of exposures to be taken in a sequence, up to 399 times. For instance, if set to 30, the device will trigger the shutter 30 times according to the other timer settings.

Údržba

• Keep the device clean and dry. Use a soft, dry cloth to wipe surfaces.
• Nevystavujte zařízení extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
• Pokud zařízení nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení.
• Nepokoušejte se jednotku rozebírat ani opravovat sami, mohlo by dojít ke zrušení záruky a poškození.

Odstraňování problémů

• Zařízení se nezapíná: Zkontrolujte instalaci baterií a ujistěte se, že jsou nové.
• Dálkové ovládání nespouští kameru:
  • Ensure the receiver is correctly connected to the camera's remote port.
  • Verify that both the remote and receiver are set to the same channel.
  • Check camera settings to ensure it is ready to accept remote triggers.
  • Confirm batteries in both units are charged.
• Timer functions not working as expected: Double-check all timer settings (DELAY, INTVL, LONG, N) on the LCD display. Ensure the TIMER START/STOP button has been pressed.

Specifikace

Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your purchase or contact VILTROX customer service directly. Keep your proof of purchase for any warranty claims.