Uživatelská příručka k baterii TROJAN T-105 PLUS 6V s hlubokým cyklem a zaplavením

1. Úvod

This manual provides essential information for the safe and effective use of your TROJAN T-105 PLUS 6V Deep Cycle Flooded Batteries. Please read all instructions carefully before installation, operation, or maintenance to ensure optimal performance and longevity of your batteries.

Image 1.1: Four TROJAN T-105 PLUS 6V Deep Cycle Flooded Batteries. These batteries are designed for applications requiring regular deep discharge and recharge cycles.

2. Bezpečnostní informace

WARNING: Lead-acid batteries contain sulfuric acid, which is highly corrosive, and produce explosive hydrogen gas during charging. Improper handling can result in severe injury or death.

• Always wear appropriate Personal Protective Equipment (PPE), including safety glasses, face shield, and acid-resistant gloves, when working with batteries.
• Ensure adequate ventilation in the area where batteries are being charged or stored to disperse hydrogen gas.
• Keep sparks, flames, and metallic objects away from batteries. Do not smoke near batteries.
• Zabraňte kontaktu s kyselinou z baterie. V případě zasažení okamšitě vypláchněte vodou a vyhledejte lékařskou pomoc.
• Nezkratujte kontakty baterie.
• Vždy používejte izolované nástroje.

Varování podle návrhu 65: Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození.

Obrázek 2.1: Boční strana view of a TROJAN T-105 PLUS battery, highlighting important safety warning labels regarding corrosive materials and potential hazards.

3. Konec produktuview

The TROJAN T-105 PLUS is a 6-volt deep cycle flooded lead-acid battery, offering 225 Amp-hours (Ah) capacity. It is engineered for robust performance in applications such as golf carts, renewable energy systems, floor scrubbers, and other industrial equipment requiring reliable, long-lasting power.

Obrázek 3.1: Nahoře view of a single TROJAN T-105 PLUS battery, illustrating the terminal posts, vent caps, and product identification labels.

4. Delivery and Initial Handling

These batteries are shipped on a pallet via truck freight. It is crucial to understand the following:

• Appointment Required: All deliveries, especially to residential addresses, require a scheduled appointment. The carrier will contact you to arrange a delivery time. Ensure your contact email and phone number on file are current.
• Presence Required: Someone must be present at the time of delivery to sign for the shipment.
• Inspection Upon Arrival: Before signing for the shipment, carefully inspect the pallet and packaging for any visible damage. Verify the box count matches the delivery receipt. Note any discrepancies or damage directly on the carrier's delivery receipt. Failure to do so may impact your ability to claim damages.
• Refused Shipments: If the carrier is unable to contact you to schedule delivery, or if the shipment is refused without valid reason, the pallet will be returned. In such cases, all freight and re-consignment charges will be deducted from any refund.

Image 4.1: Palletized shipment of batteries, displaying 'NO STACK' and 'CORROSIVE' hazard warnings, emphasizing the importance of careful handling and inspection upon delivery.

5. Nastavení a instalace

Proper installation is critical for battery performance and safety.

1. Příprava: Ensure the battery compartment is clean, dry, and well-ventilated. Confirm that all cables and connectors are in good condition.
2. Umístění: Place batteries in their designated locations, ensuring they are secure and cannot shift during operation. Use appropriate hold-down straps if necessary.
3. Spojení: Connect batteries in series or parallel as required by your system's voltage and capacity needs. Always connect positive (+) terminals to positive (+) and negative (-) terminals to negative (-). For series connections, connect the positive terminal of one battery to the negative terminal of the next.
4. Točivý moment terminálu: Secure all terminal connections firmly. Refer to the terminal configuration diagram for recommended torque values. Overtightening can damage terminals, while undertightening can lead to poor contact and overheating.
5. Závěrečná kontrola: Double-check all connections for correct polarity and tightness before applying power.

Image 5.1: A single TROJAN T-105 PLUS battery displayed with a hold-down strap and terminal nuts, illustrating components used for secure installation.

Konfigurace terminálu

Image 5.2: Diagram detailing the Embedded Low Profile Terminal (ELPT) configuration, including its dimensions, recommended torque values, and bolt size for proper connection.

6. Provoz

TROJAN T-105 PLUS batteries are deep cycle batteries, designed to be discharged and recharged repeatedly. For optimal life and performance:

• Avoid routinely discharging the batteries below 50% Depth of Discharge (DoD). Deeper discharges can shorten battery life.
• Always recharge batteries promptly after use. Leaving batteries in a discharged state can lead to sulfation and permanent capacity loss.
• Use a charger specifically designed for flooded lead-acid batteries with appropriate voltage a amperage settings for your battery bank.

7. Údržba

Regular maintenance is essential for maximizing the lifespan and performance of your flooded lead-acid batteries.

1. Kontrola hladiny elektrolytu: Periodically check the electrolyte level in each cell. The electrolyte should cover the plates. If the level is low, add distilled water until the plates are covered, but do not overfill. It is often best to add water after charging.
2. Cleaning Terminals: Keep battery terminals clean and free of corrosion. Use a wire brush and a solution of baking soda and water to clean corroded terminals. Rinse with clean water and dry thoroughly. Apply a thin coat of petroleum jelly or anti-corrosion spray to prevent future corrosion.
3. Nabíjení: Follow the charger manufacturer's instructions. Ensure batteries are fully charged regularly, especially during periods of non-use.
4. Větrání: Always ensure proper ventilation during charging to allow hydrogen gas to dissipate safely.
5. Inspekce: Regularly inspect batteries for any signs of damage, cracks, or leaks.

8. Řešení problémů

If you encounter issues with your batteries, consider the following common problems and solutions:

• Nízký objemtage / Short Run Time:
  • Příčina: Undercharging, sulfation, or old age.
  • Řešení: Ensure charger is functioning correctly and batteries are receiving a full charge. Check electrolyte levels and add distilled water if needed. If batteries are old, replacement may be necessary.
• Koroze na svorkách:
  • Příčina: Acid fumes, loose connections.
  • Řešení: Clean terminals as described in the Maintenance section. Ensure connections are tight.
• Battery Overheating During Charge:
  • Příčina: Overcharging, high ambient temperature, internal short.
  • Řešení: Check charger settings. Ensure adequate ventilation. If overheating persists, discontinue use and consult a professional.

9. Specifikace

10. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact TROJAN Battery Company directly through their official webwebu nebo kanálů zákaznických služeb. Uschovejte si účtenku jako doklad o koupi.

11. Důležité poznámky

Always adhere to local regulations for battery disposal and recycling. Do not dispose of batteries in household waste.