YOUTHINK Power Monitor XD-01136 User Manual

Zavedení

The YOUTHINK Power Monitor XD-01136 is designed to help you understand and manage your electricity consumption. This device accurately measures various electrical parameters, including power (Watts), energy (KWh), voltage, current, frequency, and power factor. By monitoring your appliance usage, you can identify energy-intensive devices and optimize your electricity costs. This manual provides comprehensive instructions for the safe and effective use of your power monitor.

Image: YOUTHINK Power Monitor XD-01136, front view showing the LCD screen and buttons.

Bezpečnostní informace

Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Zařízení nerozebírejte ani neupravujte.
• Nevystavujte zařízení vodě nebo extrémním teplotám.
• Ujistěte se, že je zařízení používáno v rámci jeho specifikovaného objemutage and current limits (refer to Specifications section).
• Do not plug in appliances that exceed the maximum rated power of 1650W to avoid overload.
• Uchovávejte mimo dosah dětí.
• Používejte pouze v suchém, vnitřním prostředí.

Vlastnosti produktu

The YOUTHINK Power Monitor XD-01136 offers several key features for comprehensive energy monitoring:

• Všestranné měření: Measures and displays CO2 emissions (CO2/KG), power (W), energy (KWh), voltage/hertz, ampere/hertz, power factor, minimum power, and maximum power.
• 8 režimů zobrazení: Easily switch between 8 different display modes to view různé parametry.
• LCD displej s podsvícením: Features a large, easy-to-read LCD screen with a blue backlight for clear visibility, even in low light conditions. The backlight automatically turns off after 15 seconds but can be reactivated by pressing any button.
• Ochrana proti přetížení: If the connected load exceeds 1650W, the LCD will display "OVERLOAD" with an audible warning, and the device will automatically disconnect power to prevent damage.
• Uchovávání dat: Automatically saves the last recorded data even when unplugged or during a power outage, ensuring no loss of information.
• Energy Cost Calculation: Allows you to input your electricity cost per KWh to calculate the total cost of appliance usage.

Nastavení

1. Rozbalení: Carefully remove the power monitor from its packaging.
2. Initial Reset (Recommended): Before first use, it is recommended to perform a full reset. Locate the small "RESET" button (often recessed) on the front panel. Use a small, pointed object (like a paperclip) to press and hold the "RESET" button for approximately 3 seconds until the display clears or resets. This ensures all functions operate correctly.
3. Připojit: Plug the YOUTHINK Power Monitor directly into a standard wall outlet.
4. Připojit spotřebič: Plug the appliance you wish to monitor into the socket on the front of the power monitor.

Image: The power monitor shown connected to a wall outlet, with various appliances like a computer, TV, washing machine, and microwave oven depicted as being monitored.

Návod k obsluze

The power monitor features four buttons: FUNKCE, NÁKLADY, UPa DOLŮ.

Režimy zobrazení

Stiskněte tlačítko FUNKCE button repeatedly to cycle through the 8 different display modes:

• Režim 1: Zobrazení času/wattů/nákladů - Shows elapsed time, current power consumption in Watts, and accumulated cost.
• Režim 2: Zobrazení času/ceny - Shows elapsed time and the set price per KWh.
• Režim 3: Čas/objtage/Zobrazení frekvence - Shows elapsed time, current voltage (V), and frequency (Hz).
• Režim 4: Zobrazení času / proudu / účiníku - Shows elapsed time, current (A), and power factor.
• Režim 5: Zobrazení času/maximálního výkonu - Shows elapsed time and the highest recorded power consumption (Hi).
• Režim 6: Zobrazení času/minimální spotřeby - Shows elapsed time and the lowest recorded power consumption (Lo).
• Mode 7: KWh Display - Shows total accumulated energy consumption in Kilowatt-hours (KWh).
• Mode 8: CO2 Emissions Display - Shows calculated CO2 emissions.

Image: Visual representation of the 7 main display modes, illustrating what information is shown in each mode.

Setting Electricity Cost

To accurately calculate energy costs, you need to input your local electricity rate:

1. Stiskněte a podržte NÁKLADY button for approximately 3 seconds. The cost setting will become active, and the display will flash.
2. Použijte FUNKCE tlačítko pro výběr číslice, kterou chcete změnit.
3. Použijte UP a DOLŮ buttons to adjust the value of the selected digit.
4. Repeat steps 2 and 3 until your desired cost per KWh is entered.
5. Stiskněte tlačítko NÁKLADY button again to confirm and save the setting.

Poznámka: If you encounter issues setting the cost, perform an initial reset as described in the Setup section. This often resolves functionality issues.

Upozornění na přetížení

The device is equipped with an overload protection feature. If the total power drawn by the connected appliance exceeds 1650W, the LCD will display "OVERLOAD" and emit an audible warning sound. The device will then automatically cut off power to the connected appliance to prevent damage to both the monitor and the appliance.

Image: The power monitor's LCD screen showing an "OVERLOAD" message and a warning bell icon, indicating that the connected appliance has exceeded the safe power limit.

Podsvícení LCD

The blue LCD backlight activates automatically when connected to AC power. It will turn off after approximately 15 seconds of inactivity. To reactivate the backlight, simply press any button.

Image: A side-by-side comparison showing the power monitor's LCD screen without backlight (left) and with the blue LED backlight activated (right), highlighting improved readability.

Údržba

• Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Pokud zařízení nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření a vlhkosti.
• Baterie: The device includes an internal battery for data retention. This battery is not user-replaceable.

Odstraňování problémů

Specifikace

Image: The back of the YOUTHINK Power Monitor, displaying detailed technical specifications and physical dimensions.

Záruka a podpora

For warranty information or technical support, please refer to the product packaging or contact the retailer from whom you purchased the device. Keep your proof of purchase for any warranty claims.