Zavedení
Děkuji za nákupasing the Donner Verb Square 7-Mode Reverb Effect Pedal. This manual provides essential information for the safe and correct operation of your new pedal. Please read it thoroughly before use and retain it for future reference.
Konec produktuview
The Donner Verb Square is a compact and versatile reverb effect pedal designed for guitarists. It features 7 distinct reverb modes, a digital circuit design with true bypass, and a durable aluminum alloy casing.
Ovládací prvky a funkce
Obrázek: Přední strana view of the Donner Verb Square pedal with numbered labels for each control and connection point.
- Vstup DC 9V: Power adapter connection (center negative).
- Knoflík DECAY: Adjusts the duration of the reverb tail.
- E.LEVEL Knob: Controls the wet/dry mix of the reverb effect.
- Knoflík TONE: Adjusts the brightness or darkness of the reverb sound.
- Knoflík pro výběr režimu: Selects one of the 7 reverb modes.
- Vstupní/výstupní konektory: Připojte svůj nástroj a ampživější.
- LED indikátor: Svítí, když je efekt aktivní.
- Nožní spínač: Zapojuje nebo obchází efekt.
True Bypass Circuitry
The pedal features true bypass, ensuring that your instrument's signal remains unaffected when the pedal is disengaged. This preserves the integrity of your original tone.
Obrázek: Detailní záběr view of the pedal's footswitch, emphasizing the true bypass feature.
Optimální návrh obvodu
High-quality electronic components and circuit design are utilized to maintain a clear and pure tone, minimizing unwanted noise and signal degradation.
Image: A conceptual diagram representing the optimal circuit design within the Donner Verb Square pedal.
Nastavení
Follow these steps to set up your Donner Verb Square pedal:
- Připojení napájení: Connect a DC 9V power adapter (center negative, sold separately) to the DC 9V input jack on the pedal. This pedal does not operate on batteries.
- Připojení přístroje: Connect your guitar or other instrument to the input jack of the pedal using a standard 1/4-inch instrument cable.
- AmpPřipojení zvlhčovače: Připojte výstupní konektor pedálu k vašemu ampvstup lifieru pomocí dalšího standardního 1/4palcového nástrojového kabelu.
Image: The Donner Verb Square pedal, illustrating the locations of the input, output, and power jacks for connection.
Návod k obsluze
Once the pedal is connected, you can begin to explore its features:
Zapojení efektu
- Press the footswitch to engage the reverb effect. The LED indicator will illuminate, signifying that the effect is active.
- Press the footswitch again to bypass the effect. The LED indicator will turn off.
Selecting Reverb Modes
The Verb Square offers 7 distinct reverb modes. Rotate the large central mode selector knob to choose your desired reverb type:
- Pokoj: Simuluje přirozený dozvuk malé až středně velké místnosti.
- Sál: Emulates the expansive and lush reverb of a large concert hall.
- Kostel: Provides a very long and resonant decay, typical of a large church or cathedral.
- Jaro: Recreates the classic sound of a spring reverb tank, often found in vintage kytara ampzáchranáři.
- Talíř: Offers the smooth, dense, and bright decay characteristic of plate reverbs.
- Studio: A versatile and balanced reverb suitable for various studio applications.
- Mod: A modulated reverb, adding subtle pitch or amplitude variations to the reverb tail for a unique texture.
Image: A close-up of the mode selector knob on the Donner Verb Square pedal, indicating the seven available reverb types.
Nastavení ovládacích prvků
Fine-tune your reverb sound using the three control knobs:
- E.LEVEL Knob: Adjusts the overall volume of the reverb effect. Turn clockwise for more effect, counter-clockwise for less.
- Knoflík DECAY: Controls the length of the reverb tail. Turn clockwise for longer decay times, counter-clockwise for shorter decay times.
- Knoflík TONE: Shapes the tonal character of the reverb. Turn clockwise for a brighter, more present reverb, and counter-clockwise for a darker, warmer sound.
Obrázek: Podrobný view of the E.LEVEL, DECAY, and TONE knobs on the pedal, with labels explaining their functions.
Údržba
Pro zajištění dlouhé životnosti a optimálního výkonu vašeho pedálu dodržujte tyto pokyny pro údržbu:
- Čištění: Use a soft, dry cloth to clean the pedal's exterior. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
- Skladování: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Disconnect the power adapter when not in use for extended periods.
- Zacházení: Avoid dropping the pedal or subjecting it to strong impacts. While the aluminum casing is durable, excessive force can cause damage.
- Napájení: Always use a regulated DC 9V power adapter with a center-negative polarity. Using an incorrect power supply can damage the unit and void the warranty.
Odstraňování problémů
If you encounter issues with your Donner Verb Square pedal, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk při sešlápnutí pedálu. | Incorrect power supply; loose cable connections; faulty cables; incorrect signal chain. | Ensure a DC 9V center-negative adapter is used. Check all instrument cables are securely connected. Test with different cables. Verify the signal chain (instrument > pedal > ampživější). |
| LED indikátor nesvítí. | No power; faulty LED. | Check power adapter connection and ensure it's functioning. If power is confirmed and LED still doesn't light, the LED may be faulty, but the pedal might still function. |
| Reverb effect is too weak or too strong. | E.LEVEL knob setting. | Adjust the E.LEVEL knob to increase or decrease the intensity of the reverb effect. |
| Reverb tail is too short or too long. | DECAY knob setting. | Adjust the DECAY knob to control the length of the reverb tail. |
| Reverb sound is too bright or too dark. | TONE knob setting. | Adjust the TONE knob to brighten or darken the reverb sound. |
If the problem persists after trying these solutions, please contact Donner customer support.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Donner |
| Model | EC965 (Verb Square) |
| Typ efektu | Reverb (7 Modes) |
| Formát signálu | Digitální |
| Typ bypassu | Skutečné přemostění |
| Požadavek na napájení | DC 9V (střední záporný) |
| Aktuální losování | Not specified (typical for mini pedals) |
| Materiál | Hliníková slitina |
| Hmotnost produktu | 272 gramů |
| Rozměry produktu (D x Š x V) | 9.4 x 4.3 x 5.1 cm |
| UPC | 713153360326 |
| ASIN | B071211MJT |
| Země původu | Čína |
Image: A diagram illustrating the physical dimensions of the Donner Verb Square pedal.
Záruka a podpora
Informace o záruce
This Donner product is covered by a jednoletá záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper power supply.
Zákaznická podpora
For technical assistance, warranty claims, or any questions regarding your Donner Verb Square pedal, please contact Donner customer support through the retailer where you purchased the product or visit the official Donner webstránky pro kontaktní údaje.
