Orbit 6-Station Easy Dial Sprinkler Timer

Zavedení

Thank you for choosing the Orbit 6-Station Easy Dial Sprinkler Timer. This manual provides detailed instructions for the proper installation, programming, and maintenance of your new irrigation controller. Designed for ease of use, this timer helps you manage your watering schedules efficiently, ensuring your landscape receives optimal hydration while conserving water.

Please read this manual thoroughly before operating the timer to ensure correct setup and to maximize its features.

Obrázek 1: Přední view of the Orbit 6-Station Easy Dial Sprinkler Timer, showing the large LCD screen and programming dial.

Důležité bezpečnostní informace

• Před prováděním jakékoli elektroinstalace nebo údržby vždy odpojte napájení.
• Do not install the timer in direct sunlight or in areas exposed to extreme temperatures.
• Ujistěte se, že všechna elektrická připojení jsou bezpečná a chráněna před vlhkostí.
• This device is intended for outdoor use with irrigation systems only.
• Uchovávejte mimo dosah dětí.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Orbit 6-Station Easy Dial Sprinkler Timer Unit
• Montážní materiál (šrouby a hmoždinky do zdi)
• Uživatelská příručka (tento dokument)

Nastavení a instalace

1. Mounting the Timer

1. Choose a suitable location near an electrical outlet and away from direct sunlight or extreme weather.
2. Use the provided mounting hardware to secure the timer to a wall or sturdy surface. Ensure it is level.

2. Wiring the Valves

Each irrigation valve has two wires. One wire from each valve connects to the common wire, and the other connects to a specific station terminal on the timer.

• Connect the common wire from your valves to the terminal labeled "COMMON" or "C" on the timer.
• Connect the remaining wire from each valve to its corresponding station terminal (e.g., Valve 1 to Station 1, Valve 2 to Station 2, etc.). The Orbit 6-Station timer supports up to six individual zones.

3. Připojení napájení

Plug the timer's power adapter into a standard electrical outlet. The LCD screen should illuminate, indicating power is supplied.

Návod k obsluze

The Easy Dial interface allows for intuitive programming. Rotate the dial to select different programming modes.

1. Setting Current Time and Date

1. Otočte voličem na NASTAVIT HODINY.
2. Použijte +/- tlačítka pro nastavení hodiny a poté stiskněte DALŠÍ to move to minutes, and then to AM/PM.
3. Stiskněte DALŠÍ to set the current year, month, and day using the +/- tlačítka.

2. Programming Watering Schedules (Programs A and B)

The timer offers two independent programs, A and B, allowing for different watering schedules for various zones or plant types.

1. Otočte voličem na PROGRAM A or PROGRAM B.
2. Nastavit časy zahájení: Stiskněte DALŠÍ to cycle through up to four start times per program. Use +/- to adjust. Set unused start times to OFF.
3. Nastavte doby běhu: Stiskněte DALŠÍ. For each station (1-6), use +/- to set the watering duration from 1 minute to 240 minutes. Press DALŠÍ to move to the next station.
4. Nastavení dnů zavlažování: Stiskněte DALŠÍ. Použití +/- to select specific days of the week, or choose an interval (e.g., every 2nd day).

3. Smart Budgeting / Seasonal Adjust

This feature allows you to adjust all station run times in a program by a percentage, useful for seasonal changes without reprogramming each station individually.

1. Otočte voličem na ROZPOČET.
2. Použijte +/- buttons to adjust the watering percentage from 10% to 200%. 100% is the programmed run time.

4. Ruční zavlažování

To water manually outside of programmed schedules:

1. Otočte voličem na MANUÁL.
2. Použití +/- to select the station you wish to water and set its duration.
3. Stiskněte START to begin manual watering. The timer will automatically return to the AUTO position after manual watering is complete.

5. Zpoždění kvůli dešti

Temporarily suspend watering for a set period due to rain or other reasons.

1. Otočte voličem na ZPOŽDĚNÍ DEŠTĚ.
2. Použití +/- to select the number of days (24, 48, or 72 hours) you wish to delay watering.
3. The timer will resume its programmed schedule automatically after the delay period.

Údržba

1. Čištění

Wipe the timer's exterior with a damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.

2. Battery Backup (if applicable)

Some models may include a battery compartment for program backup during power outages. If your model has this feature, replace batteries annually or when the low battery indicator appears. Refer to the battery compartment for specific battery type (e.g., 2 x AA batteries).

Odstraňování problémů

Specifikace

• Model: 57596
• Značka: Obíhat
• Počet stanic: 6
• Materiál: Plast
• Hmotnost: Přibližně 1.3 lb (0.59 kg)
• Příkon: Standard AC (refer to power adapter for specific voltage)
• UPC: 816602024845

Informace o záruce

Orbit products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webwebu. Uschovejte si účtenku jako doklad o koupi.

Zákaznická podpora

If you have any questions or require assistance with your Orbit 6-Station Easy Dial Sprinkler Timer, please contact Orbit customer support. Contact information can typically be found on the product packaging or the official Orbit webmísto.