Nutone 763N

Nutone 763N BROAN-NUTONE Ventilátor s osvětlením Uživatelská příručka

Model: 763N

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Nutone 763N BROAN-NUTONE Ventilation Fan with Light. This unit is designed to provide efficient ventilation and bright illumination in one integrated system, ensuring a comfortable and well-lit environment.

The Nutone 763N features quiet operation, an attractive grille, and a plug-in motor and light for ease of use and maintenance. Please read this manual thoroughly before installation and operation to ensure safe and proper use of the product.

Bezpečnostní informace

VAROVÁNÍ: Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, dodržujte následující:

  • Před prováděním servisu nebo čištění jednotky vždy odpojte napájení na servisním panelu.
  • Instalační práce a elektrické vedení musí být provedeny kvalifikovanou osobou (osobami) v souladu se všemi platnými předpisy a normami, včetně protipožárních stavebních předpisů a norem.
  • Používejte tuto jednotku pouze způsobem určeným výrobcem. V případě dotazů kontaktujte výrobce.
  • This unit is suitable for use over a tub or shower enclosure when installed in a GFCI protected branch circuit.
  • Do not use with solid state speed controls.
  • Nepoužívat v kuchyních.
  • Typ IC pro použití s ​​tepelnou izolací.

Konec produktuview

The Nutone 763N combines a ventilation fan and an incandescent light in a single, compact unit. Key features include:

  • Účinné větrání: Provides 50 CFM (Cubic Feet per Minute) air delivery to effectively remove moisture and odors.
  • Tichý provoz: Engineered for a sound level of 2.5 Sones, ensuring minimal noise disruption.
  • Integrované osvětlení: Features a translucent white polymeric lens for diffused light, using one (1) 100W maximum A19 incandescent bulb (bulb not included).
  • Samostatné ovládání: Fan and light can be operated independently or together, depending on your needs.
  • Odolná konstrukce: Housing made of galvanized steel with a white polymeric grille.
Nutone 763N Ventilation Fan with Light, angled view

Obrázek 1: Úhlové view of the Nutone 763N Ventilation Fan with Light, showing the white grille and translucent light cover.

Nutone 763N Ventilation Fan with Light, top-down view

Obrázek 2: Shora dolů view of the Nutone 763N, highlighting the square light and surrounding ventilation grilles.

Nastavení a instalace

Installation instructions are included with each unit. A mounting flange is provided for secure installation. Ensure all local electrical codes and safety regulations are followed during installation.

Kontrolní seznam před instalací:

  • Verify power is disconnected at the service panel.
  • Ensure the installation location is suitable (e.g., not in kitchens, suitable for GFCI protected circuits over tubs/showers).
  • Confirm duct size is 4 inches in diameter for proper connection.
  • Prepare necessary tools and materials (e.g., wiring, fasteners, screwdriver).

Kroky instalace:

  1. Carefully unpack the unit and inspect for any damage.
  2. Position the housing (8¼" x 8" x 5¾") in the desired ceiling location, utilizing the provided mounting flange for secure attachment.
  3. Connect the 4-inch diameter ductwork to the fan's duct connector.
  4. Perform electrical wiring connections according to local codes. The unit operates on 120 VAC, 60 Hz, 1.6 A. Ensure a GFCI protected branch circuit if installing over a tub or shower.
  5. Install one (1) 100W maximum A19 incandescent bulb (not included) into the lamp zásuvka.
  6. Attach the white polymeric grille (12" x 10¾") and translucent white polymeric lens to the housing.
  7. Restore power at the service panel and test the fan and light functions.
Nutone 763N Ventilation Fan with Light, side view showing duct connection

Obrázek 3: Strana view illustrating the 4-inch duct connection point on the fan housing.

Návod k obsluze

The Nutone 763N Ventilation Fan with Light is designed for straightforward operation. The fan and light functions can be controlled independently or simultaneously, depending on your wiring setup and switch configuration.

  • Provoz ventilátoru: Activate the fan using the designated wall switch. The fan will begin to draw air, removing moisture and odors from the room.
  • Světelný provoz: Activate the light using its dedicated wall switch. The incandescent bulb will provide illumination through the diffused lens.
  • Kombinovaný provoz: If wired to a single switch or a dual-function switch, both the fan and light can be turned on or off together.

For optimal performance, it is recommended to operate the fan during and after activities that generate moisture, such as showering, to prevent humidity buildup and potential mildew growth.

Nutone 763N Ventilation Fan with Light installed in a bathroom ceiling

Figure 4: The Nutone 763N fan and light unit seamlessly installed in a bathroom ceiling, providing both ventilation and overhead lighting.

Údržba

Regular maintenance will ensure the longevity and efficient operation of your Nutone 763N unit. Always disconnect power at the service panel before performing any maintenance.

Cleaning the Grille and Lens:

  • Gently pull down the grille to detach it from the housing.
  • Remove the translucent lens.
  • Wash the grille and lens with mild soap and water. Rinse thoroughly and dry completely before reattaching.

Cleaning the Blower Wheel:

  • With the grille removed, carefully wipe down the one-piece molded polymeric blower wheel with a damp tkanina.
  • Vyhněte se použití abrazivních čisticích prostředků nebo rozpouštědel.

Výměna žárovky:

  • Ujistěte se, že je vypnuté napájení.
  • Remove the grille and lens.
  • Carefully unscrew the old A19 incandescent bulb.
  • Screw in a new 100W maximum A19 incandescent bulb.
  • Reattach the lens and grille.

Odstraňování problémů

ProblémMožná příčinaŘešení
Ventilátor nefunguje.No power to the unit; faulty switch; motor issue.Check circuit breaker/fuse. Verify wall switch is functional. Consult a qualified electrician if issues persist.
Světlo se nerozsvítí.Burned out bulb; no power to the unit; faulty switch.Replace bulb. Check circuit breaker/fuse. Verify wall switch is functional.
Ventilátor je hlučný.Dirty blower wheel; loose mounting; obstruction in duct.Clean blower wheel. Ensure unit is securely mounted. Check ductwork for obstructions.
Špatné větrání.Dirty blower wheel; obstructed ductwork; incorrect duct size.Clean blower wheel. Clear any duct obstructions. Ensure 4-inch duct is used.

Specifikace

FunkceDetail
ZnačkaNutone
Název modelu763N
Proud vzduchu50 kubických stop za minutu (CFM)
Úroveň hluku2.5 Sones
Rozměry pouzdra8¼" x 8" x 5¾"
Rozměry mřížky12" x 10¾"
Velikost potrubíprůměr 4 palců
Lamp TypIncandescent (100W max A19, bulb not included)
Elektrické hodnocení120 VAC, 60 Hz, 1.6 A (with one 100W bulb)
Materiál bydleníGalvanizovaná ocel
Materiál mřížkyWhite Polymeric
Materiál čočkyTranslucent White Polymeric
MotorPlug-in, permanently lubricated
DmychadloOne-piece polymeric, 4¾" diameter
Typ instalaceMounting flange provided, Type IC for thermal insulation

Záruka a podpora

For specific warranty information and details regarding your Nutone 763N Ventilation Fan with Light, please refer to the warranty card included with your product packaging or visit the official Nutone webUschovejte si účtenku jako doklad o koupi pro případné reklamace.

If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Nutone Customer Service. Contact information can typically be found on the product packaging or the official Nutone webmísto.

© 2025 Nutone. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.