DryEasy Plus Wireless Bedwetting Alarm User Manual

1. Úvod a produktview

The DryEasy Plus Wireless Bedwetting Alarm is an electronic device designed to assist in overcoming nocturnal enuresis (bedwetting). This system utilizes a sensor to detect moisture and wirelessly transmit a signal to a receiver, which then activates an alarm (sound and/or vibration) to alert the user.

Mezi klíčové vlastnosti patří:

• Wireless operation for enhanced comfort and mobility.
• Reliable sensor that detects the first drops of urine.
• Multiple alarm sounds (6 options) to prevent habituation.
• Adjustable digital volume control (4 levels).
• Three operation modes: sound only, vibration only, or sound plus vibration.
• No pairing required; the system is ready for use upon setup.

2. Obsah balení

The DryEasy Plus Wireless Bedwetting Alarm package includes the following components:

• 1 x Receiver Unit (White)
• 1 x Transmitter Unit (Blue) with attached sensor
• Návod k použití (tento dokument)

3. Identifikace součásti

Familiarize yourself with the main components of the DryEasy Plus system:

3.1 Přijímací jednotka

The receiver unit is the alarm component that produces sound and/or vibration. It is designed to be placed on a bedside table or near the user.

• Resetovací tlačítko: Used to silence the alarm and reset the system after an event.
• Kontrolka: Provides visual feedback, such as low battery or alarm status.
• Speaker/Vibrator: Emits audible alarms and/or vibrates to alert the user.

3.2 Transmitter Unit and Sensor

The transmitter unit is a small, blue device that attaches to the user's clothing. It is connected to a moisture-sensitive sensor that clips onto underwear.

• Vysílač: Sends a wireless signal to the receiver when moisture is detected.
• Senzor vlhkosti: A small clip that attaches to the underwear to detect urine.
• Přepnout Clamp: Ensures secure attachment of the sensor to the underwear.

4. Pokyny k nastavení

Follow these steps to set up your DryEasy Plus Wireless Bedwetting Alarm:

4.1 Instalace baterie

Both the Receiver and Transmitter units require batteries for operation.

1. Open the battery compartment on the back of both the Receiver and Transmitter units.
2. Vložit two (2) AAA alkaline batteries into each unit, ensuring correct polarity (+/-).
3. Přihrádky na baterie bezpečně uzavřete.

Poznámka: Baterie nejsou součástí balení a je nutné je zakoupit samostatně.

4.2 Placement of Receiver Unit

Place the white Receiver unit on a bedside table or another stable surface within close proximity to the user. Ensure it is within a reasonable range (up to 30 meters) of the Transmitter for optimal signal reception.

4.3 Attaching the Transmitter and Sensor

The blue Transmitter unit and its attached sensor are designed to be worn by the user.

1. Ensure the user is wearing underwear.
2. Clip the small moisture sensor onto the outside of the user's underwear at the point where urine is most likely to be detected first. The toggle clamp should securely hold the sensor in place.
3. Attach the blue Transmitter unit to the waistband of the user's underwear or pajamas. The transmitter should be positioned comfortably and securely.

The DryEasy Plus system uses advanced wireless technology and does not require manual pairing. Once batteries are installed and components are placed, the system is ready for operation.

5. Návod k obsluze

The DryEasy Plus alarm offers customizable settings for sound, vibration, and volume.

5.1 Výběr provozního režimu

The Receiver unit has three distinct operation modes:

• Pouze zvuk: The alarm will only produce an audible sound when triggered.
• Pouze vibrace: The alarm will only vibrate when triggered, providing a silent alert.
• Sound Plus Vibration: The alarm will both produce an audible sound and vibrate when triggered.

To change the mode, locate the mode selection button on the Receiver unit and press it until the desired mode is indicated (e.g., by an LED pattern or a brief test of the mode).

5.2 Adjusting Sound and Volume

The Receiver unit offers 6 different alarm sounds and 4 levels of digital volume control.

• Changing Sounds: Press the sound selection button (if available, or cycle through sounds using the mode button if combined) to choose a preferred sound. You can select a single sound or set it to play the 6 sounds at random to prevent the user from becoming accustomed to one sound.
• Ovládání hlasitosti: Use the volume control buttons (up/down) on the Receiver unit to adjust the alarm volume to one of the 4 available levels.

5.3 Alarm Activation and Reset

When the sensor detects moisture, the Transmitter will send a signal to the Receiver, activating the alarm according to the selected mode (sound, vibration, or both).

To silence and reset the alarm after it has been triggered:

1. Stiskněte tlačítko Resetovat button on the Receiver unit. This will stop the alarm.
2. Remove the wet underwear and sensor. Clean and dry the sensor thoroughly before re-attaching it to fresh underwear.
3. Ensure the sensor is completely dry before re-use to prevent false alarms.

6. Údržba

Proper maintenance ensures the longevity and effective operation of your DryEasy Plus alarm.

6.1 Čištění snímače

After each use, especially if the sensor has detected urine, it is crucial to clean it:

• Gently wipe the sensor with a damp hadříkem a jemným mýdlem.
• Rinse with clean water and ensure all soap residue is removed.
• Důležité: Allow the sensor to air dry completely before re-attaching it to underwear. Moisture on the sensor can trigger false alarms.
• Do not immerse the Transmitter unit in water.

6.2 Výměna baterie

The Receiver and Transmitter units are powered by AAA batteries. A low battery indicator on the Receiver will signal when batteries need replacement.

• When the low battery indicator activates, replace both AAA batteries in the affected unit.
• Always replace both batteries at the same time with new alkaline batteries.
• Použité baterie zlikvidujte v souladu s místními předpisy.

6.3 Skladování

When not in use for extended periods, remove batteries from both units and store the alarm in a cool, dry place.

7. Řešení problémů

If you encounter issues with your DryEasy Plus Wireless Bedwetting Alarm, refer to the following troubleshooting guide:

8. Specifikace

9. Záruka a podpora

9.1 Informace o záruce

Specific warranty details for the DryEasy Plus Wireless Bedwetting Alarm are not provided in this manual. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.

9.2 Zákaznická podpora

Pro další pomoc, technickou podporu nebo dotazy se prosím obraťte na:

• Webmísto: www.bedwettingsolving.com
• E-mail: info@bedwettingsolving.com
• Výrobce: Marvelworks Ltd.