AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Důležité bezpečnostní informace

• Elektrická bezpečnost: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• Pouze pro vnitřní použití: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• Větrání: Ensure adequate ventilation around the LED driver to prevent overheating.
• Kompatibilita komponent: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• Montážní šrouby (12 kusy)

4. Specifikace produktu

5. Nastavení a instalace

Před zahájením instalace se ujistěte, že je hlavní napájení v oblasti instalace vypnuto jističem.

5.1 Schéma zapojení nahořeview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. Vypněte napájení hlavním jističem.
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Zajistěte všechna připojení vhodnými konektory.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Sériové připojení

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 Paralelní připojení

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. Příprava povrchu: Ujistěte se, že montážní povrch je čistý, suchý a hladký.
2. Lepicí montáž: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. Šroubová montáž: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Návod k obsluze

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Funkce dálkového ovládání

• ON/OFF: Stiskněte tlačítko ON tlačítko pro rozsvícení světel a VYPNUTO tlačítko pro jejich vypnutí.
• Nastavení jasu:
  • Stiskněte LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • Použijte 100 %, 50 %, 25 % buttons for quick brightness presets.
• Párování: To pair the remote with the controller, press the Pár button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Dekódovat button within 5 seconds of powering on the lights until the lights flicker.
• Funkce časování: Stiskněte 1H, 2H, 4Hnebo 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7. Údržba

The AIBOO LED Lighting System requires minimal maintenance.

• Čištění: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Inspekce: Periodically check all connections for tightness and inspect cables for any signs of damage.
• Výměna baterie: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Řešení problémů

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. Informace o záruce

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webUschovejte si účtenku jako doklad o koupi pro případné reklamace.

10. Zákaznická podpora

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
• Online zdroje: Navštivte AIBOO Store on Amazon pro další informace o produktu a podporu.