Návod k obsluze nástěnného držáku na televizi LogiLink BP0015 Full Motion

1. Úvod

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your LogiLink BP0015 Full Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold LCD, Plasma, or LED televisions ranging from 32 to 55 inches with a maximum weight capacity of 50 kg (110 lbs).

The full motion design allows for tilt, swivel, and level adjustments, providing optimal viewing angles in various room configurations.

2. Bezpečnostní informace

VAROVÁNÍ: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on a wall that is not structurally sound. Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
• Tento výrobek je určen pouze pro vnitřní použití.
• Use only the hardware provided by the manufacturer. Using unauthorized hardware may cause damage or lead to product failure.
• Instalaci vždy provádějte ve dvou osobách, abyste předešli zranění nebo poškození.
• Ujistěte se, že všechny šrouby jsou bezpečně utažené, ale nepřetahujte je.
• Regularly check the mount for any signs of loosening or damage.
• Během instalace držte děti a domácí zvířata mimo dosah.

3. Obsah balení

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact your retailer for assistance.

• Sestava nástěnné desky
• Ramena držáku televizoru (2x)
• Sada montážního materiálu (šrouby, hmoždinky, podložky, distanční podložky)
• Návod k použití

Obrázek 1: Nadview of the LogiLink BP0015 Full Motion TV Wall Mount components. This image displays the main wall plate, the articulating arm, and the TV mounting brackets, all in a black finish.

4. Nastavení a instalace

4.1 Kontroly před instalací

• TV Size and Weight: Ensure your TV is between 32 and 55 inches and weighs no more than 50 kg (110 lbs).
• Kompatibilita VESA: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns: 200x200, 400x200, 300x300, and 400x400 mm.
• Typ stěny: Determine your wall type (wood stud, concrete, brick). Different wall types require specific anchors and drilling techniques. Consult a professional if unsure.

4.2 Montáž nástěnné desky

1. Select the desired mounting location on your wall. Use a stud finder to locate wood studs if applicable.
2. Hold the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling holes.
3. Vyvrtejte pilotní otvory na vyznačených místech. Velikost vrtáku bude záviset na typu zdi a dodaných hmoždinkách.
4. Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached.

4.3 Připevnění držáků televizoru k televizoru

1. Opatrně položte televizor displejem dolů na měkký, čistý povrch.
2. Attach the two TV bracket arms to the VESA mounting holes on the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are oriented correctly (hooks facing downwards).
3. Všechny šrouby pevně utáhněte, ale nepřetahujte je.

4.4 Mounting the TV to the Wall Plate

1. S pomocí opatrně zvedněte televizor pomocí připojených konzolí.
2. Hook the TV brackets onto the wall plate. Ensure both brackets are securely seated on the wall plate's rails.
3. Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.

Obrázek 2: Technical diagram illustrating the dimensions and articulation ranges of the LogiLink BP0015 wall mount. It shows the minimum and maximum distances from the wall, VESA compatibility, and tilt/swivel angles.

5. Provoz

The LogiLink BP0015 offers full motion capabilities for optimal viewflexibilita.

• Nastavení sklonu: The TV can be tilted from -20° to +10°. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
• Nastavení otáčení: The articulating arm allows for a swivel range of -90° to +90°. Gently push or pull the TV to the desired horizontal viewúhel.
• Úprava úrovně: A level adjustment of -3° to +3° is available to fine-tune the horizontal alignment of your TV after installation. This can typically be adjusted by loosening specific screws on the TV brackets, leveling the TV, and then re-tightening. Refer to the detailed diagram for specific adjustment points.
• Vzdálenost od zdi: The mount allows the TV to be positioned between 62 mm and 475 mm from the wall, providing flexibility for various viewing needs and cable management.

6. Údržba

• Pravidelná kontrola: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené a bezpečné.
• Čištění: Clean the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Mazání: Kloubové spoje jsou navrženy pro plynulý pohyb a obecně nevyžadují mazání. Pokud se pohyb stane tuhým, obraťte se na zákaznickou podporu.

7. Řešení problémů

Problém: Televizor není v rovině.

Řešení: Use the level adjustment feature (-3° to +3°) to correct the horizontal alignment. Loosen the relevant screws on the TV brackets, adjust the TV, and re-tighten.

Problem: Mount feels loose after installation.

Řešení: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket screws to ensure they are securely tightened. Verify the wall structure is adequate. If issues persist, consult a professional installer.

Problem: Difficulty adjusting tilt or swivel.

Řešení: For tilt, ensure the tilt adjustment knobs are sufficiently loosened before attempting to adjust. For swivel, ensure no cables are snagged or obstructing movement. Do not force adjustments.

8. Specifikace

Obrázek 3: A chart detailing VESA compatibility and other specifications for various LogiLink wall mount models, including BP0015. This helps users confirm their TV's compatibility.

9. Záruka a podpora

Informace o záruce a technickou podporu naleznete v dokumentaci dodané s vaším nákupem nebo navštivte oficiální webové stránky LogiLink. webUschovejte si doklad o koupi pro případ reklamace.

Manufacturer: 2direct GmbH