Zigbee XHS2-TY

Zigbee Door/Window Sensor XHS2-TY / XHS2-UE User Manual

Models: XHS2-TY, XHS2-UE

1. Úvod

The Zigbee Door/Window Sensor (models XHS2-TY, XHS2-UE) is designed to enhance the security of residential premises by monitoring the opening and closing of doors and windows. This sensor system consists of two main components: a sensor unit and a magnet. When the magnet is separated from the sensor unit, a signal is transmitted to your connected home security system, enabling various automation services such as triggering alarms or activating convenience lighting based on system settings. This manual provides detailed instructions for the installation, operation, and maintenance of your sensor.

2. Bezpečnostní informace

  • Bezpečnost baterie: Use only the specified battery type (CR2450). Do not attempt to recharge non-rechargeable batteries. Dispose of used batteries according to local regulations. Keep batteries out of reach of children.
  • Instalace: Ensure the mounting surface is clean and dry before installation. Avoid installing the sensor in areas with extreme temperatures or high humidity.
  • Rušení: Chraňte senzor před silnými elektromagnetickými poli, která by mohla rušit jeho činnost.
  • Tampering: Do not attempt to open or modify the sensor unit beyond battery replacement. Tampering may void the warranty and compromise security.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • Zigbee Door/Window Sensor Unit (Main unit with battery compartment)
  • Magnet (Smaller unit)
  • Mounting Hardware (e.g., adhesive tape, screws)
  • CR2450 Battery (Pre-installed or included separately)
Zigbee Door/Window Sensor components including main unit, magnet, and adhesive tape

Image 3.1: Contents of the Zigbee Door/Window Sensor package, showing the main sensor unit, the smaller magnet, and adhesive mounting strips.

4. Vlastnosti produktu

  • Door/Window Monitoring: Detects opening and closing events.
  • Kompatibilita se Zigbee: Works with various Zigbee-enabled home security and automation systems (e.g., Comcast Xfinity Security systems, Home Assistant, SmartThings).
  • Napájení z baterie: Operates on a single CR2450 battery for extended periods.
  • Tamper ochrana: Zahrnuje vamper switch to detect unauthorized removal of the sensor.
  • Snímání teploty: Provides ambient temperature readings (note: temperature reporting frequency and accuracy may vary by system).

5. Nastavení

5.1. Instalace baterie

The sensor typically comes with a CR2450 battery pre-installed, often with a pull tab to prevent discharge. If the battery is not installed or needs replacement:

  1. Gently lift the white shell casing away from the beveled edges of the larger sensor unit.
  2. Slide the white shell off to access the internal components and battery compartment.
  3. Insert one CR2450 battery, ensuring the correct polarity (+/-).
  4. Replace the white shell, ensuring it clicks securely into place.

5.2. Montáž senzoru

The sensor can be mounted using either adhesive tape or screws (if provided). For optimal performance, ensure the sensor unit and magnet are aligned and placed within 1/2 inch (1.27 cm) of each other when the door/window is closed.

  1. Vyberte umístění: Select a clean, dry, and flat surface on the door/window frame and the moving part of the door/window.
  2. Čistý povrch: Wipe the chosen areas with a clean cloth to remove dust or grease.
  3. Připevněte lepidlo: Apply the provided adhesive tape to the back of both the main sensor unit and the magnet.
  4. Snímač polohy: Mount the larger sensor unit on the fixed frame of the door or window.
  5. Position Magnet: Mount the smaller magnet on the moving part of the door or window, directly adjacent to the sensor unit. Ensure the alignment marks (if any) on both parts face each other.
  6. Testovací zarovnání: Close the door/window and verify that the sensor and magnet are within the recommended distance.
Zigbee Door/Window Sensor main unit and magnet side-by-side

Image 5.1: The main sensor unit and its corresponding magnet, illustrating their relative size and appearance for mounting.

Detailní záběr view of the Zigbee Door/Window Sensor main unit

Obrázek 5.2: Podrobný view of the main Zigbee Door/Window Sensor unit, showing its design and potential mounting points.

5.3. Pairing with Your System

The pairing process may vary slightly depending on your Zigbee hub or security system (e.g., SmartThings, Home Assistant, Xfinity Security). Refer to your system's documentation for specific instructions. General steps are as follows:

  1. Aktivace režimu párování na Hubu: Open your Zigbee hub's application or interface and initiate the

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.