1. Úvod
This manual provides essential information for the safe assembly, operation, and maintenance of your Outsunny Tunnel Greenhouse. Please read these instructions carefully before beginning assembly or use to ensure proper functionality and longevity of the product.
Obrázek 1: Konecview of the Outsunny Tunnel Greenhouse (Model 845-120).
2. Bezpečnostní informace
Varování: During assembly and installation, sharp edges may be present. Exercise caution to prevent injury. Ensure the greenhouse is securely fastened during construction and installation. Avoid using acidic pesticides, as these can cause chemical reactions with the PE cover.
To extend the lifespan of your greenhouse, reinforce it against severe weather conditions such as strong winds, heavy rain, snow, and hail.
3. Montážní návod
Assembly requires at least two people. Follow the included assembly guide for detailed step-by-step instructions. Ensure all components are present before starting.
3.1 Identifikace součásti
Refer to the parts list provided with your greenhouse for identification of all frame tubes, connectors, and the PE cover.
3.2 Frame Construction
Connect the galvanized metal tubes according to the assembly diagram. Ensure all connections are firm and secure. Use the provided fasteners to join the frame sections.
Image 2: Detail of a frame connection point, showing how tubes are joined.
Obrázek 3: Další view of a frame connection, illustrating the secure fastening.
3.3 Instalace krytu
Carefully drape the PE cover over the assembled frame. Ensure it is centered and evenly distributed. The cover is designed to be 20 cm longer at the sides than the metal tubes. This extra length can be buried in the ground or weighted down with stones to enhance stability.
Image 4: Illustrates how the greenhouse cover's bottom edge can be buried or weighted for stability, and the use of ground anchors.
4. Návod k obsluze
4.1 Větrání
The greenhouse features side windows with insect screens to ensure optimal ventilation. Open these windows as needed to regulate temperature and humidity inside the greenhouse. The roll-up net windows allow for good air circulation and can also serve as observation windows.
Image 5: Demonstrates the practical design with roll-up net windows for ventilation and a roll-up zippered door for easy access.
Přístup 4.2
The greenhouse is equipped with a roll-up door with a zipper for easy entry and exit, and for moving plants or equipment in and out.
5. Údržba
5.1 Čištění
Regularly clean the PE cover with water and a soft cloth or brush to remove dirt and debris. Avoid harsh chemicals that could damage the material.
5.2 Sezónní péče
In autumn, thoroughly clean the cover and store it in a dry place if you plan to dismantle the greenhouse for winter. If leaving it assembled, ensure it is well-secured against winter weather conditions (wind, snow, etc.).
5.3 Kontrola rámu
Periodically inspect the metal frame for any signs of rust or damage. Tighten any loose bolts or connections.
6. Řešení problémů
6.1 Nestabilita
If the greenhouse feels unstable, ensure the bottom edge of the cover is properly buried or weighted down. Verify that all frame connections are tight and that ground anchors are securely installed.
6.2 Špatné větrání
If plants are suffering from excessive heat or humidity, ensure all ventilation windows are open. Consider additional shading during peak sunlight hours if necessary.
6.3 Cover Damage
Small tears in the PE cover can often be repaired with specialized greenhouse repair tape. For significant damage, consider replacing the cover.
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 845-120 |
| Celkové rozměry (D x Š x V) | 600 x 300 x 200 cm (6L x 3B x 2H meters) |
| Materiál krytu | Polyethylene (PE) 140 g/m² |
| Materiál rámu | Galvanized Metal Tubes |
| Počet dveří | 1 (rolovací se zipem) |
| Number of Ventilation Windows | 9 (with insect screens) |
| Barva | Bílý |
| Hmotnost položky | 20.5 kg |
Image 6: Dimensional diagram of the greenhouse, showing length, width, and height.
8. Záruka a podpora
For information regarding warranty coverage or to obtain replacement parts, please contact Outsunny customer support. Keep your purchase receipt as proof of purchase.
Poznámka: The manufacturer does not sell individual replacement parts for this product. For any issues, please contact your retailer or the manufacturer directly for assistance.