Xfinity XR2 Version U2 Remote Control

Zavedení

This manual provides detailed instructions for the Xfinity XR2 Remote Control, Version U2 (Model 4330952071). Designed for use with Comcast Xfinity DVRs, HD set-top boxes, and compatible televisions, this remote offers intuitive control with its ergonomic design and 20 clearly labeled buttons. It utilizes infrared (IR) technology for reliable signal transmission up to 10 meters and can control up to two devices.

Nastavení

1. Instalace baterií

The XR2 remote requires two (2) AA batteries for operation. To install:

1. Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
2. Posuňte kryt dolů a zvedněte jej.
3. Vložte dvě baterie typu AA a ujistěte se, že kladný (+) a záporný (-) pól správně směřují k indikátorům uvnitř přihrádky.
4. Nasaďte kryt přihrádky na baterie tak, že jej zasunete zpět na místo, dokud bezpečně nezacvakne.

2. Párování dálkového ovladače

This remote can be paired with certain Comcast devices to enable full functionality. To determine if your device supports pairing and to initiate the process:

1. Stiskněte a podržte Nastavení button until the LED indicator on the remote changes from red to green, then release the button.
2. Stiskněte tlačítko XFINITY button, and then release it.
3. If the Pairing Screen is not displayed on your television, press the XFINITY button again, up to two more times.

If your device supports pairing, an instruction screen will be displayed on your television to guide you through the remaining steps. For more detailed information and troubleshooting, please visit: www.xfinity.com/remotes

Ovládání dálkového ovladače

The Xfinity XR2 remote is designed for straightforward control of your entertainment system. It can control up to two devices: your Comcast cable box and a compatible television. The remote uses infrared (IR) signals, so ensure a clear line of sight between the remote and the devices you are controlling.

Základní funkce

• Moc: Turns your cable box and/or TV on/off.
• Kanál nahoru/dolů: Changes channels on your cable box.
• Zvýšení/Snížení hlasitosti: Upravuje hlasitost vašeho televizoru.
• Ztlumit: Mutes the television audio.
• Průvodce: Otevře programového průvodce.
• Menu/Xfinity: Opens the main menu or Xfinity interface.
• Ovládání přehrávání: Play, Pause, Fast Forward, Rewind, Stop, Record for DVR functions.
• Navigační podložka: Arrow buttons and OK for menu navigation.

Ovládání zařízení

After initial setup and pairing, your remote should automatically control your cable box and TV. If you need to program the remote to control a specific TV brand or switch between devices, refer to the pairing instructions or the Xfinity remotes website for specific codes and procedures. The Nastavení key in conjunction with the ABCD keys can be used for programming specific cable box types (Xfinity, Cisco, SA, or Moto).

Údržba

To ensure the longevity and optimal performance of your Xfinity XR2 remote:

• Výměna baterie: Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up. Always replace both AA batteries at the same time.
• Čištění: Use a soft, dry cloth to clean the remote's surface. Avoid using liquid cleaners or abrasive materials, as these can damage the remote.
• Skladování: Dálkový ovladač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Odstraňování problémů

If you encounter issues with your Xfinity XR2 remote, try the following solutions:

• Dálkové ovládání nereaguje: Ensure there is a clear line of sight between the remote and your devices. Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
• Zařízení nereaguje na příkazy: Verify that the remote is correctly paired with your cable box and television. Refer to the "Pairing the Remote" section or the Xfinity remotes website for re-pairing instructions.
• Omezená funkčnost: If certain buttons do not work, ensure the remote is programmed for the correct device (TV or cable box). Some advanced functions may require specific programming or may not be supported by all devices.
• Problémy s LED indikátorem: If the LED does not light up during use, the batteries may be depleted or incorrectly inserted.

Specifikace

Informace o záruce

For specific warranty details regarding your Xfinity XR2 remote control, please refer to the documentation provided at the time of purchase or contact Xfinity customer support directly. Warranty terms and conditions may vary.

Podpora

For additional assistance, troubleshooting tips, or to access the latest information regarding your Xfinity XR2 remote, please visit the official Xfinity support webmísto:

www.xfinity.com/remotes

You may also contact Xfinity customer service for personalized support.