Držák na stěnu LogiLink BP0014 Full Motion TV

Zavedení

This manual provides detailed instructions for the safe and correct installation and operation of your LogiLink BP0014 Full Motion TV Wall Mount. Please read all instructions carefully before assembly and use. Retain this manual for future reference.

Bezpečnostní upozornění:

• Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a televizoru.
• Nepřekračujte maximální nosnost 50 kg (110 liber).
• Always use appropriate tools and follow all installation steps precisely.
• Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným odborníkem.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny součásti přítomny a nepoškozené. Balení by mělo obsahovat:

• 1 x LogiLink BP0014 TV Wall Mount assembly
• Mounting hardware kit (screws, anchors, washers for various TV models and wall types)
• Návod k použití

Image: Packaging of the LogiLink BP0014 TV Wall Mount, showing the mount and its box.

Nastavení a instalace

Follow these steps carefully to install your TV wall mount.

1. Připravte zeď: Identify the desired mounting location. Use a stud finder to locate wooden studs if mounting on drywall, or ensure you have appropriate anchors for concrete/brick walls. Mark the drilling points accurately.
2. Připevnění nástěnné desky: Drill pilot holes at the marked locations. Secure the wall plate of the mount to the wall using the provided lag bolts and washers. Ensure it is level and firmly attached.
3. Připevnění držáků televizoru: Carefully lay your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes.
4. Zavěšení televize na nástěnnou desku: With assistance, carefully lift the television and hook the attached TV brackets onto the wall plate. Ensure the brackets are properly seated and secured with any locking mechanisms provided.
5. Upravte a zajistěte: Once the TV is safely mounted, make any necessary tilt, swivel, or level adjustments. Tighten all adjustment screws to secure the TV in its desired position.

Image: Technical drawing illustrating the dimensions and range of motion for the LogiLink BP0014 TV Wall Mount. It shows minimum and maximum extension from the wall (60-473mm), height (242mm), and VESA compatibility (min. 160 - max. 400mm). Tilt range is +10° to -20°, and level adjustment is -3° to +3°.

Image: A chart comparing various LogiLink full motion TV wall mount models. The BP0014 model is suitable for 32-55 inch TVs, has a maximum weight capacity of 50 kg (110 lbs), offers tilt of +10°/-20°, swivel of +90°/-90°, and level adjustment of +3°/-3°. It supports VESA patterns of 200x200, 300x300, 400x200, and 400x400 mm, with a wall distance of 60-473 mm.

Návod k obsluze

The LogiLink BP0014 is a full motion TV wall mount, offering flexibility in viewing úhly.

• Otočný: Gently push or pull the television to adjust its horizontal angle. The mount allows for a swivel range of up to 90 degrees left or right, depending on TV size and wall distance.
• Náklon: To adjust the vertical viewing angle, loosen the tilt adjustment knobs (if present) on the TV brackets, tilt the screen to the desired angle (+10° to -20°), and then re-tighten the knobs to secure.
• Úprava úrovně: Small rotational adjustments (+3° to -3°) can be made to ensure the TV is perfectly level after installation. Refer to the specific mechanism on your mount for this adjustment.
• Rozšíření: The articulated arms allow the TV to be extended from the wall, providing a variable distance between 60mm (minimum) and 473mm (maximum).

Always adjust the TV slowly and carefully to prevent damage or injury. Ensure all connections remain secure during adjustments.

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

• Čištění: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V průběhu času mohou vibrace nebo seřizování způsobit uvolnění upevňovacích prvků.
• Mazání: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult the manufacturer.

Odstraňování problémů

If you encounter issues with your LogiLink BP0014 TV Wall Mount, consider the following common solutions:

• Televizor není vodorovně umístěn: Check the level adjustment mechanism on the mount. Loosen, adjust, and re-tighten to achieve a level display.
• Držák se zdá být uvolněný: Re-check all wall mounting bolts and TV bracket screws. Ensure they are securely tightened. Do not overtighten.
• Difficulty adjusting movement: Ensure no cables are snagged or obstructing movement. Check if any adjustment knobs or screws are overtightened, preventing free movement.
• TV exceeds weight/size limits: If your TV is heavier than 50 kg or larger than 55 inches, it is not compatible with this mount. Using an incompatible TV can lead to mount failure and damage.

For persistent issues, please contact LogiLink customer support.

Specifikace

Záruka a podpora

LogiLink products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official LogiLink webpodrobné záruční podmínky naleznete na webu.

For technical support, replacement parts, or further assistance, please contact your local LogiLink distributor or visit the LogiLink support portal. When contacting support, please have your product model number (BP0014) and purchase information ready.