Medline MDS89745RAH

Medline Shower Chair Seat with Padded Armrests and Back Instruction Manual

Model: MDS89745RAH

Zavedení

The Medline Shower Chair Seat with Padded Armrests and Back is designed to provide a safe and comfortable bathing experience. This heavy-duty shower chair features slip-resistant soles, adjustable height, and padded armrests for enhanced support and stability. It is constructed from lightweight and rust-resistant aluminum, ensuring durability and ease of use.

Medline Shower Chair with Padded Armrests and Back

Image: The Medline Shower Chair, highlighting its padded armrests and backrest.

Bezpečnostní informace

To ensure safety when using the shower chair, please observe the following guidelines:

  • Avoid leaning back excessively, especially with the front legs off the ground, as this can cause tipping.
  • Be cautious when reaching or sitting on the chair.
  • Ensure the chair is placed on a level surface to prevent slips or accidents.
  • Always check for stability before each use.
  • Do not sit too far forward on the edge of the seat.

Komponenty

Before assembly, ensure all the following components are present:

  • 1 x Seat with drain holes
  • 1 x opěradlo
  • 2 x Padded Armrests
  • 4 x Legs with slip-resistant feet
  • Assembly hardware (hand-twist knob nuts, bolts, and a small curved black metal piece)

Nastavení a montáž

The Medline Shower Chair is designed for tool-free assembly. Follow these steps:

  1. Rozbalte všechny součásti a ověřte je podle seznamu součástí.
  2. Identify the seat, backrest, armrests, and four legs.
  3. Attach the legs to the underside of the seat. Ensure to match the 'A' marked leg portions to the 'A' marked seat portions, and 'B' to 'B'. Use the provided hand-twist knob nuts and bolts to secure them.
  4. Ensure the small curved black metal piece is correctly placed to strengthen the leg assembly.
  5. Attach the backrest to the designated slots on the seat frame.
  6. Attach the padded armrests to the sides of the seat frame.
  7. Verify all connections are secure and tight before use.
Tool-free assembly of Medline Shower Chair

Image: A person demonstrating the tool-free assembly of the shower chair.

Návod k obsluze

Nastavení výšky

The shower chair features an adjustable seat height with 1-inch increments, ranging from 16 inches to 21 inches. To adjust the height:

  1. Locate the push-pins on each leg.
  2. Press the push-pin and slide the leg extension up or down to the desired height.
  3. Ensure the push-pin fully engages in the adjustment hole.
  4. Repeat for all four legs, ensuring they are all set to the same elevation for stability.

For proper bath chair height, the back of the user’s knees should touch the front edge of the bath bench while standing. This allows the user’s feet to be firmly on the floor when seated.

Adjustable height feature of Medline Shower Chair

Image: Visual representation of the shower chair's adjustable height feature.

Obecné použití

  • Always place the chair on a level surface inside the shower or bathtub.
  • The slip-resistant soles on the feet provide stability on wet surfaces.
  • The seat includes drain holes to prevent water from accumulating.
  • The chair supports a maximum weight of 350 lbs.
Features of Medline Shower Chair: backrest, padded armrests, drain holes, non-slip feet

Obrázek: Detail view of the shower chair highlighting its key features: backrest, padded armrests, drain holes, and non-slip feet.

Údržba

  • Čištění: Clean the shower chair regularly with mild soap and water. Avoid abrasive cleaners that may damage the surface.
  • Inspekce: Periodically inspect all connections, bolts, and rubber feet for wear, damage, or looseness. Tighten any loose connections immediately.
  • Sušení: The aluminum frame is rust-resistant. Allow the chair to drip dry after each use to maintain hygiene and prolong its lifespan.

Odstraňování problémů

  • Židle se kymácí: Ensure all four legs are adjusted to the exact same height. Check that all hand-twist knob nuts are securely tightened and the small curved black metal piece is correctly installed.
  • Chair slides: Verify that the rubber feet are clean and free of soap residue or debris. Ensure the chair is placed on a completely level and stable surface.
  • Obtížnost nastavení výšky: Ensure the push-pins are fully depressed when attempting to adjust the leg height. If a pin is stuck, gently wiggle the leg while pressing the pin.

Specifikace

FunkceDetail
ZnačkaMedline
Číslo modeluMDS89745RAH
MateriálHliník
BarvaBílý
Rozměry produktu (D x Š x V)13.4"H x 16.3"Š x 33.7"V
Nastavitelná výškaYes (6 positions, 16" to 21" seat height)
Maximální nosnost350 libry
Hmotnost položky7.1 libry
Hloubka sedu13.5 palců
Délka sedáku13.1 palců
Šířka opěradla židle16 palců
Vnitřní venkovní použitíKrytý
Zahrnuté komponenty1 Židle
Medline Shower Chair dimensions

Image: Diagram showing the dimensions of the Medline Shower Chair.

Záruka

This Medline Shower Chair comes with a 1letá omezená záruka od výrobce. Uschovejte si prosím doklad o koupi pro případ reklamace.

Podpora

For further assistance, questions, or to report any issues, please contact Medline customer support:

Telefon: 800-633-5463

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.