1. Úvod
The SVS PB16-Ultra is a high-performance 16-inch ported cabinet subwoofer designed to deliver an exceptional bass experience. Engineered with advanced technology, this subwoofer provides unmatched low-frequency extension and output capabilities, ensuring detailed and articulate sound reproduction. It features a massive 16-inch SVS Ultra Driver with an 8-inch edge-wound voice coil, powered by a Sledge STA-1500D amplifier with 1500 watts RMS continuous power (5000 watts peak dynamic power).
This manual provides essential information for setting up, operating, and maintaining your SVS PB16-Ultra subwoofer to ensure optimal performance and longevity.
2. Bezpečnostní informace
Please read and understand all safety instructions before operating your SVS PB16-Ultra subwoofer. Retain this manual for future reference.
- Elektrická bezpečnost: Always connect the subwoofer to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect power before cleaning or servicing.
- Umístění: Ensure adequate ventilation around the subwoofer. Avoid placing it near heat sources or in direct sunlight. Position the subwoofer on a stable, level surface to prevent tipping.
- Zacházení: This subwoofer is heavy (approximately 199.6 pounds). Use proper lifting techniques or seek assistance when moving the unit to prevent injury.
- Větrání: Do not block any ventilation openings. Overheating can cause damage to the unit.
- Čištění: Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosol sprays.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- SVS PB16-Ultra 16-inch Ported Subwoofer
- Napájecí kabel
- Stručný průvodce / Návod k obsluze
- Protective Grille (pre-installed or separate)
4. Nastavení
4.1 Umístění
Proper placement of your SVS PB16-Ultra subwoofer is crucial for optimal performance. Consider the following:
- Rohové umístění: Placing the subwoofer in a corner can maximize output and create a more impactful bass response.
- Přední část místnosti: Positioning the subwoofer near your front speakers can improve soundstage integration.
- Více subwooferů: If using multiple subwoofers, experiment with different placements to achieve the most even bass distribution throughout your listening area.
- Vyhněte se překážkám: Ensure the front-firing driver and ports are not obstructed. The subwoofer features a protective non-resonant steel mesh grille.

4.2 Připojení
Connect the subwoofer to your audio system using appropriate cables. The PB16-Ultra supports wired subwoofer connectivity.
- Connect the LFE (Low-Frequency Effects) output from your AV receiver or pre-amplifier to the LFE input on the SVS PB16-Ultra.
- Plug the power cord into the subwoofer's power inlet and then into a grounded electrical outlet.
4.3 Počáteční zapnutí
After making all connections, switch the subwoofer to the 'On' position. The PB16-Ultra features an Auto-On/On switch with a 'green' standby mode for energy efficiency.
5. Návod k obsluze
5.1 Základní ovládací prvky
The SVS PB16-Ultra can be controlled via its front panel display and buttons, or through the dedicated SVS smartphone application.

5.2 SVS Smartphone App
For advanced control and fine-tuning, download the SVS Subwoofer DSP smartphone application. This app allows you to adjust various settings from your listening position, including:
- Ovládání hlasitosti: Adjust the subwoofer's output level.
- Dolní propust: Nastavte dělicí frekvenci tak, aby se subwoofer plynule propojil s hlavními reproduktory.
- Fázové řízení: Adjust the phase to ensure optimal integration with other speakers.
- Parametrický EQ: Fine-tune the frequency response to compensate for room acoustics and personal preferences.
- Kompenzace zisku místnosti: Optimize bass output for your specific room environment.
- Port Tuning: Adjust the port settings for different performance characteristics (e.g., deeper extension or tighter response).
- Předvolby: Uložte a vyvolejte vlastní nastavení pro různé režimy poslechu (např. hudba, filmy).
6. Údržba
To ensure the longevity and optimal performance of your SVS PB16-Ultra subwoofer, follow these maintenance guidelines:
- Čištění: Regularly wipe the cabinet with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Péče o mřížku: The protective steel mesh grille can be gently cleaned with a soft brush or vacuum cleaner attachment.
- Větrání: Periodically check that the ventilation openings are clear of dust and debris to prevent overheating.
- Podmínky prostředí: Nevystavujte subwoofer extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
7. Řešení problémů
If you encounter issues with your SVS PB16-Ultra subwoofer, refer to the following common troubleshooting steps:
- Žádný zvuk:
- Check if the subwoofer is powered on and the power cord is securely connected.
- Verify that the audio input cables are correctly connected to both the subwoofer and your AV receiver/pre-ampživější.
- Ensure the volume level on the subwoofer and your audio system is not set to minimum or muted.
- Check the low-pass filter and phase settings in the SVS app or on the control panel.
- Zkreslený zvuk:
- Reduce the volume level on the subwoofer and your audio system.
- Zkontrolujte, zda nejsou uvolněné spoje nebo poškozené kabely.
- Adjust the parametric EQ settings in the SVS app to address specific frequency issues.
- Drnčení nebo vibrace:
- Ujistěte se, že je subwoofer umístěn na stabilním povrchu.
- Check for any loose objects near or on the subwoofer that might be vibrating.
- Verify that the protective grille is securely attached.
8. Specifikace
Key technical specifications for the SVS PB16-Ultra 16-inch Ported Subwoofer:
| Funkce | Detail |
|---|---|
| Název modelu | PB-16 |
| Číslo modelu položky | PB16ULTBLK |
| Typ reproduktoru | Subwoofer |
| Průměr subwooferu | 16 palce |
| Průměr basového reproduktoru | 16 palce |
| Typ zvukového ovladače | Dynamický ovladač |
| Maximální výstupní výkon reproduktoru | 1500 Watts RMS (5000 Watts Peak Dynamic Power) |
| Ampživější typ | Sledge STA-1500D with Fully Discrete MOSFET Output |
| Kontrolní metoda | App |
| Technologie připojení | Bluetooth, drátové |
| Speciální funkce | Bass Boost |
| Rozměry produktu | 21.7"H x 30.9"Š x 25"V |
| Hmotnost položky | 199.6 libry |
| Barva | Černá dubová dýha |
| Zdroj napájení | Elektrický kabel |
| Vstupní objemtage | 120 voltů |
| UPC | 850071005615 |

9. Záruka a podpora
The SVS PB16-Ultra subwoofer comes with a Plná záruka. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official SVS webmísto.
SVS is known for its outstanding customer service. If you require technical assistance, have questions about setup, or need support for any issues, please contact SVS customer service directly. Their team is available to provide expert guidance and support.
For the latest support information and contact details, please visit the SVS Store on Amazon or the official SVS webmísto.