Konec produktuview
The Alpine Hemlock Hand Dryer is a heavy-duty, high-speed commercial hand dryer designed for efficient and hygienic hand drying. Constructed from durable stainless steel, it offers quick drying times and is suitable for various commercial and public restroom environments. This manual provides essential information for the safe and proper installation, operation, and maintenance of your hand dryer.
Obrázek: Přední strana view of the Alpine Hemlock Hand Dryer, highlighting its heavy-duty design and compliance.
Klíčové vlastnosti
- Rychlé schnutí: Dries hands in approximately 8-10 seconds.
- Silný výkon: Features a motor speed of 22,000 RPM and a wind speed of 200 MPH.
- Nastavitelné teplo: Provides heated air between 45-65°C.
- Automatický provoz: Equipped with an automatic motion sensor with a sensing distance of 5 +/- 1 inch.
- Odolná konstrukce: Made from heavy-duty, corrosion-proof stainless steel for long-lasting use.
- Energeticky účinný: Designed to be cost-efficient, offering up to 95% savings compared to paper towels.
- Flexibilní instalace: Supports both simple plug-in and hard-wired power options.
- Bezpečnost a soulad: UL Listed and ADA Compliant.
Image: Visual representation of the hand dryer's motor speed, wind speed, and heat settings.
Image: Diagram showing the cost efficiency of the hand dryer versus paper towel usage.
Instalace
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Alpine Hemlock Hand Dryer Unit
- Montážní šrouby
- Nástěnné kotvy
- Podložky
- Imbusový klíč
Image: Hand dryer dimensions and a visual of the included mounting hardware.
Montážní pokyny
- Vyberte umístění: Choose a suitable wall location, ensuring adequate space around the unit for proper operation and maintenance. Consider ADA compliance guidelines for height and clearance.
- Označte vrtné body: Use the mounting template (if provided, or measure according to the unit's backplate) to mark the drilling points on the wall.
- Vrtací otvory: Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or hollow surfaces.
- Bezpečná montážní deska: Attach the hand dryer's mounting plate (if separate) to the wall using the provided screws and washers.
- Elektrické připojení:
- Možnost pluginu: If using the plug-in option, ensure a compatible 110-120V outlet is available near the installation site.
- Hard-Wired Option: For hard-wired installations, it is recommended to consult a qualified electrician. Ensure power is disconnected at the circuit breaker before making any electrical connections. Connect the hand dryer's wiring to the building's electrical supply according to local electrical codes.
- Připojení osoušeče rukou: Carefully align the hand dryer unit with the mounting plate and secure it using the remaining screws or locking mechanism.
- Testovací provoz: Obnovte napájení a otestujte osoušeč rukou, zda funguje správně.
Image: Illustration of the two available power options: simple plug-in and hard-wired.
Operace
The Alpine Hemlock Hand Dryer operates automatically using an infrared motion sensor.
- Aktivovat: Place your hands directly under the air outlet. The sensor will detect your hands and activate the air blower. A blue light will illuminate to indicate operation.
- Suché ruce: Move your hands slowly back and forth under the airflow to ensure even drying. The powerful air stream and heated air will dry your hands quickly.
- Deaktivovat: Remove your hands from the sensor's range. The hand dryer will automatically shut off after a few seconds.
Image: Diagram illustrating the optimal hand placement and sensing distance for automatic operation.
Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho osoušeče rukou.
- Čištění exteriéru: Otřete vnější povrch z nerezové oceli měkkým hadříkemamp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could scratch the finish.
- Mřížka přívodu vzduchu: Periodically check the air inlet grille for dust or lint accumulation. Clean with a soft brush or vacuum cleaner to maintain proper airflow.
- Čištění senzoru: Ensure the motion sensor lens is clean and free from obstructions. Wipe gently with a soft cloth.
- Inspekce: Regularly inspect the power cord (if plug-in) and mounting for any signs of damage or loosening.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Osoušeč rukou se neaktivuje. | No power supply; Sensor obstructed or dirty; Hands not within sensing range. | Check power connection/circuit breaker; Clean sensor; Place hands within 5 +/- 1 inch of outlet. |
| Slabé proudění vzduchu nebo pomalé schnutí. | Air inlet grille obstructed; Motor issue. | Clean air inlet grille; Contact customer support if problem persists. |
| Hand dryer runs continuously. | Sensor malfunction; Obstruction in sensor path. | Remove any obstructions; Clean sensor; Contact customer support. |
Specifikace
- Model: B01M0QQ9Z2
- Rozměry (V x Š x H): 12.31 palce x 11.40 palce x 6.68 palce
- Hmotnost: 10.96 lb (4.97 kg)
- Elektrické specifikace: 110-120 Volts, 50/60 Hz
- Power Consumption (Heating Element ON): 1240-1800 Watts (15 Amps)
- Power Consumption (Heating Element OFF): 700 Watty (5.8 Amps)
- Rychlost motoru: 22,000 ot./min
- Rychlost větru: 200 MPH
- Teplota vzduchu: 45-65 °C
- Doba schnutí: 8-10 sekund
- Materiál: Heavy-Duty Stainless Steel
- certifikace: UL Listed, ADA Compliant
Záruka a podpora
The Alpine Hemlock Hand Dryer comes with a 5letá omezená záruka. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims, technical support, or any inquiries, please contact Alpine Industries customer service.
Uschovejte si prosím doklad o koupi pro ověření záruky.
Image: Visual representation of the 5-year limited warranty coverage.