Phoenix A0846
Phoenix Tornado Turbo II 2400W Bi-Motor Pet Dryer
Uživatelská příručka
Zavedení
Thank you for choosing the Phoenix Tornado Turbo II 2400W Bi-Motor Pet Dryer. This professional-grade pet dryer is designed for efficient and effective drying of pets, featuring a powerful bi-motor system. Please read this manual thoroughly before operating the dryer to ensure safe and optimal performance. Keep this manual for future reference.
Důležité bezpečnostní pokyny
- Před použitím si přečtěte všechny pokyny.
- Do not operate the dryer with a damaged cord or plug.
- Keep the dryer away from water and wet surfaces. Do not immerse in water.
- Always unplug the dryer when not in use or before cleaning.
- Do not allow children to operate the dryer.
- Ensure the air inlets and outlets are clear of obstructions during operation.
- Používejte pouze příslušenství doporučené výrobcem.
- Do not direct hot air at sensitive areas of the pet for extended periods.
Nastavení
Follow these steps to set up your Phoenix Tornado Turbo II pet dryer:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nejsou poškozené.
- Umístění: Place the dryer on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
- Nástavec na hadici: Connect the flexible hose securely to the air outlet nozzle on the dryer. Twist until it locks into place if applicable.
- Nástavec trysky: Select the desired nozzle (e.g., round, flat, comb) and attach it firmly to the end of the flexible hose.
- Připojení napájení: Zapojte napájecí kabel do uzemněné elektrické zásuvky. Ujistěte se, že hlasitosttage matches the dryer's requirements.

Image 1: Phoenix Tornado Turbo II Pet Dryer with hose and various nozzles. This image shows the main unit, the flexible hose, and different attachments for grooming.
Návod k obsluze
Before operating, ensure your pet is calm and accustomed to the sound of a dryer. Start with low settings and gradually increase as needed.
- Zapnutí: Otočte hlavní vypínač do polohy „ON“.
- Ovládání rychlosti: Use the speed control knob to adjust the airflow intensity. Start with a lower speed for sensitive pets or areas, and increase for faster drying.
- Ovládání tepla: The dryer features a heat function. Use the heat switch to select between ambient air and heated air. Use heat sparingly and always monitor the pet's skin temperature to prevent overheating.
- Technika sušení: Hold the nozzle a safe distance from the pet's skin. Move the nozzle continuously to avoid concentrating heat in one area. Work from the pet's head towards the tail, drying in sections.
- Vypnout: Once drying is complete, turn off the heat switch (if used), then turn the speed control to minimum, and finally turn off the main power switch. Unplug the unit from the wall outlet.
Údržba
Pravidelná údržba zajistí dlouhou životnost a optimální výkon vaší sušičky.
- Čištění filtru: The air filter located at the rear of the dryer should be cleaned after every few uses, or more frequently if used heavily. Unplug the dryer, remove the filter cover, and clean the filter with a brush or vacuum. Replace the filter and cover securely.
- Čištění exteriéru: Otřete vnější část sušičky měkkým, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
- Hose and Nozzle Cleaning: Clean the hose and nozzles as needed to remove pet hair and debris.
- Skladování: Store the dryer in a dry, cool place, away from direct sunlight and moisture. Coil the power cord neatly.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Sušička se nezapne. | No power, faulty outlet, damaged cord/plug. | Check power connection, try another outlet. Inspect cord for damage. If damaged, contact support. |
| Slabé proudění vzduchu. | Clogged air filter, obstructed hose/nozzle. | Clean the air filter. Check hose and nozzles for blockages. |
| Sušička se přehřívá a vypíná. | Overuse, blocked air vents, dirty filter. | Allow dryer to cool down. Clean air filter and ensure vents are clear. Reduce usage time. |
| Neobvyklý hluk během provozu. | Loose components, foreign object inside, motor issue. | Turn off and unplug. Check for loose parts or objects. If noise persists, contact support. |
Specifikace
- Číslo modelu: A0846
- Značka: Phoenix
- Moc: 2400 W (Bi-Motor)
- Vstupní objemtage: 220-240V AC (typical for region)
- Rozměry produktu (D x Š x V): 50 x 70 x 42 cm
- Hmotnost: 6.95 kg
- Vlastnosti: Adjustable speed, heat function
Záruka a podpora
Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte na svého prodejce nebo přímo na výrobce. Uschovejte si účtenku jako doklad o koupi.
Výrobce: Phoenix
For further assistance, please visit the official Phoenix webnebo kontaktujte jejich oddělení zákaznických služeb.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.