Dragonhawk LCD Dual Tattoo Machine Power Supply P076 Instruction Manual

Zavedení

This manual provides detailed instructions for the safe and efficient operation of your Dragonhawk LCD Dual Tattoo Machine Power Supply, Model P076. Please read this manual thoroughly before use to ensure proper setup and to maximize the lifespan of your equipment.

Bezpečnostní informace

• Always ensure the power supply is disconnected from the main power source before connecting or disconnecting any components.
• Nevystavujte napájecí zdroj vlhkosti ani extrémním teplotám.
• Zabraňte pádu jednotky nebo jejímu vystavení silným nárazům.
• Only use the provided power plug and compatible accessories.
• This device is intended for professional use by trained individuals.
• Nepokoušejte se jednotku rozebírat ani opravovat sami. Obraťte se na kvalifikovaný servisní personál.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Dragonhawk LCD Dual Tattoo Machine Power Supply (Model P076)
• 1 x Power Plug (suitable for your region)
• 1 x Dragonhawk Foot Pedal
• 1 x Clip Cord

Konec produktuview

The Dragonhawk P076 Power Supply is designed to provide stable and consistent power output for tattoo machines. Its compact size and user-friendly interface make it suitable for various tattooing environments.

Image: Dragonhawk P076 Power Supply shown with its retail packaging.

Klíčové vlastnosti:

• Quick and accurate voltage úpravy.
• Smooth, consistent power output for enhanced machine reliability.
• Compact and portable design (Net Weight: 145g, Dimensions: 90*87*32.5mm).
• Přepětítage protection for safety.
• Anti-fatigue mode for extended use.

Image: The power supply with text indicating "Mini Power", "Portable Mini", "Switch on/off", "Overvoltage protecting", "Net Weight: 145g", and "Cubage: 90*87*32.5mm".

Pokyny pro nastavení

1. Připojte napájení: Plug the provided power plug into the power supply's input port (located at the back) and then into a suitable electrical outlet. The LCD display should illuminate.
2. Připojení nožního pedálu: Insert the foot pedal's connector into the designated foot pedal port on the front of the power supply. This port is typically marked with a foot pedal icon.
3. Connect Clip Cord: Insert one end of the clip cord into the clip cord port on the front of the power supply. This port is typically marked with a coil machine icon or similar. Connect the other end of the clip cord to your tattoo machine.

Obrázek: Přední strana view of the power supply showing the two input jacks, the digital voltage display, and the rotary knob.

Obrázek: Zpět view of the power supply, illustrating the power input socket and regulatory markings.

Návod k obsluze

1. Zapnutí/vypnutí: Once connected to power, the unit is typically in standby. Press the rotary knob to turn the power supply on or off.
2. Seřízení svtage: Rotate the knob clockwise to increase the voltage and counter-clockwise to decrease it. The current voltagNa obrazovce LCD se zobrazí e.
3. Anti-Fatigue Mode: To activate the anti-fatigue mode, press and hold the rotary knob for a few seconds. This mode allows the machine to run continuously without needing to keep the foot pedal pressed. Press the knob again to deactivate.

Image: The power supply with an illustration showing how to press the knob to switch it on/off and activate anti-fatigue mode.

Údržba

• Čištění: Wipe the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in liquids.
• Skladování: Pokud napájecí zdroj nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o kabely: Regularly inspect all cables (power, foot pedal, clip cord) for any signs of wear or damage. Replace damaged cables immediately.

Odstraňování problémů

• Bez napájení:
  • Ensure the power plug is securely connected to both the power supply and the electrical outlet.
  • Zkontrolujte, zda je elektrická zásuvka funkční.
  • Verify the power supply is switched on (press the rotary knob).
• Stroj neběží:
  • Check all connections: power supply to outlet, foot pedal to power supply, clip cord to power supply, and clip cord to tattoo machine.
  • Zajistěte zvtage is set appropriately for your machine.
  • If using a foot pedal, ensure it is functioning correctly.
  • If in anti-fatigue mode, ensure it is activated correctly.
• Nekonzistentní výkon:
  • Zkontrolujte všechny kabely, zda nejsou poškozené nebo zda nejsou uvolněné.
  • Ensure the power supply is on a stable surface and not overheating.

Specifikace

Záruka a podpora

Dragonhawk provides coverage for this product. For any inquiries or support needs, please reach out through Amazon's messaging system. For video tutorials, setup guides, and professional tips, visit the official Dragonhawk YouTube channel at Youtube.com/@Dragonhawkofficial.