Zavedení
This manual provides essential instructions for the installation, operation, and maintenance of your Intel E97379-003 CPU Cooler. This cooler is designed to provide efficient cooling for Intel Core i3, i5, and i7 processors compatible with Socket 1150, 1155, and 1156 motherboards. Please read this manual thoroughly before proceeding with installation.
Nastavení a instalace
Before installation, ensure your system is powered off and disconnected from the power source. This cooler is compatible with Intel LGA 1150, 1155, and 1156 sockets.
Příprava
- Ensure your motherboard is compatible with LGA 1150/1155/1156 sockets.
- Remove any existing CPU cooler and clean off old thermal paste from the CPU surface using isopropyl alcohol and a lint-free cloth.
- The Intel E97379-003 CPU Cooler comes with thermal paste pre-applied to the heatsink base. Do not add additional thermal paste unless the pre-applied layer is damaged.
Kroky instalace
- Umístění chladiče: Carefully align the four push-pins on the cooler's base with the four mounting holes around the CPU socket on the motherboard. Ensure the fan cable is oriented towards the CPU_FAN header.
- Secure the Push-Pins: Gently push down on the body of the cooler to engage the clear plastic posts into the motherboard holes. Once the posts are through, firmly push down on the black tops of each push-pin in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until you hear a click. This expands the clear plastic barbs, securing the cooler.
- Ověřte instalaci: Gently tug on the cooler to ensure all four pins are securely locked into place and the cooler is firmly seated on the CPU. Improper installation can lead to poor cooling performance.
- Připojení kabelu ventilátoru: Connect the 4-pin fan connector to the CPU_FAN header on your motherboard. Ensure it is fully seated.
Image: Intel E97379-003 CPU Cooler correctly installed on a motherboard, showing the fan and heatsink assembly.
Obrázek: Spodní část view of the Intel E97379-003 CPU Cooler, highlighting the aluminum heatsink fins and the four plastic push-pin mounting mechanisms.
Návod k obsluze
The Intel E97379-003 CPU Cooler operates automatically once installed and connected to the motherboard's 4-pin CPU_FAN header. The fan speed is controlled by the motherboard's Pulse Width Modulation (PWM) function, which adjusts the fan speed based on the CPU temperature to maintain optimal cooling and minimize noise.
- Automatic Speed Control: The fan speed will increase under heavy CPU load and decrease during idle periods.
- Sledování: You can monitor CPU temperatures and fan speeds using motherboard utility software or BIOS/UEFI settings.
Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost chladiče procesoru.
- Odstranění prachu: Periodically inspect the heatsink fins and fan blades for dust accumulation. Use compressed air to gently blow dust away from the heatsink and fan. Ensure the fan blades do not spin excessively fast during cleaning to prevent damage.
- Kontrola ventilátoru: Check the fan for any obstructions or signs of wear. Ensure the fan spins freely without unusual noises.
- Teplovodní pasta: The pre-applied thermal paste is designed for long-term use. Reapplication is generally not necessary unless the cooler is removed and reinstalled, in which case the old paste should be cleaned off and new thermal paste applied.
Odstraňování problémů
If you encounter issues with your CPU cooler, refer to the following common troubleshooting steps:
- Přehřátí CPU:
- Verify that all four push-pins are securely locked into the motherboard.
- Ensure the 4-pin fan connector is properly seated in the CPU_FAN header.
- Check for excessive dust buildup on the heatsink and fan, and clean if necessary.
- Confirm that the thermal paste is making good contact between the CPU and heatsink.
- Ventilátor se netočí:
- Check the 4-pin fan connection to the motherboard.
- Enter your motherboard's BIOS/UEFI settings to ensure the CPU_FAN header is enabled and configured correctly.
- Inspect the fan for any physical obstructions preventing it from spinning.
- Nadměrný hluk ventilátoru:
- Ensure the cooler is securely mounted and not vibrating against other components.
- Clean any dust from the fan blades and heatsink.
- Check for any loose cables or objects interfering with the fan blades.
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | E97379-003 |
| Kompatibilita soketů CPU | Intel LGA 1150, 1155, 1156 (Core i3/i5/i7) |
| Rychlost ventilátoru | 2 000 ot./min - 20 000 ot./min |
| Konektor ventilátoru | 4-Pin PWM |
| Akustický hluk | 22 dBA |
| Jmenovitý objemtage | 12 V DC |
| Jmenovitý proud | 0.28 A |
| Materiál chladiče | Aluminum with Copper Insert |
| Způsob chlazení | Chlazení vzduchem |
| Rozměry produktu (D x Š x V) | 4.33" × 4.09" × 2.95" (110 mm × 104 mm × 75 mm) |
Obrázek: Přední strana view of the Intel E97379-003 CPU Cooler, showing the fan and heatsink assembly.
Image: Close-up of the Intel E97379-003 CPU Cooler fan label, displaying model number, voltage a podrobnosti o výrobci.
Informace o záruce
For detailed warranty information regarding your Intel E97379-003 CPU Cooler, please refer to the official Intel website or the warranty documentation included with your product packaging. Warranty terms and conditions may vary by region and retailer.
Zákaznická podpora
If you require further assistance or have questions not covered in this manual, please visit the official Intel support website or contact Intel customer service. You may also consult your PC manufacturer's support resources if this cooler was part of a pre-built system.
Podpora Intel Webmísto: https://www.intel.com/content/www/us/en/support/products/cooling-solutions.html