NEC MultiSync EA245WMI-BK-SV 24-inch Display User Manual

1. Úvod

This manual provides essential information for the safe and efficient use of your NEC MultiSync EA245WMI-BK-SV 24-inch display. Please read these instructions thoroughly before operating the product and retain them for future reference. The NEC MultiSync EA245WMI-BK-SV is an advanced IPS desktop monitor designed for professional environments, featuring a 1920 x 1200 resolution, wide viewing angles, and ergonomic adjustability.

2. Bezpečnostní informace

Observe the following safety precautions to prevent damage to the display and to ensure your personal safety:

• Zdroj napájení: Use only the power cord supplied with the display and connect it to a properly grounded outlet.
• Větrání: Neblokujte větrací otvory. Zajistěte dostatečný prostor kolem displeje pro správné proudění vzduchu.
• vlhkost: Do not expose the display to rain or moisture. Avoid placing liquids near or on the display.
• Čištění: Disconnect the power cord before cleaning. Use a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Umístění: Place the display on a stable, level surface. Avoid direct sunlight, heat sources, or excessive dust.
• Servis: Nepokoušejte se tento výrobek opravit sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• NEC MultiSync EA245WMI-BK-SV 24-inch Display
• Display Stand (Base and Neck)
• Napájecí kabel
• Kabel DisplayPort
• Upstream kabel USB 3.0
• Uživatelská příručka (tento dokument)
• Spectra View II Software CD/Download Information
• Color Calibration Sensor (Spider Colorimeter)

4. Nastavení

4.1 Sestavení stojanu

Carefully remove the display and stand components from the packaging. Attach the stand neck to the display panel, ensuring it clicks securely into place. Then, attach the stand base to the neck, typically with a screw or locking mechanism. Refer to the diagram below for visual guidance.

Figure 4.1: NEC MultiSync EA245WMI-BK-SV Display with Stand. This image shows the monitor from the front and a slight side angle, illustrating its slim bezel and the attached ergonomic stand.

4.2 Propojovací kabely

Before connecting cables, ensure the display and your computer are powered off. Connect the necessary cables to the corresponding ports on the rear of the display and your computer.

Figure 4.2: Rear Connectivity Ports. This image displays the back of the monitor, highlighting the various input and output ports including DisplayPort, HDMI, DVI-D, VGA, and USB 3.0 hub.

• Napájecí kabel: Připojte napájecí kabel k napájení displeje a poté do elektrické zásuvky.
• Video kabel: Connect one end of a DisplayPort, HDMI, DVI-D, or VGA cable to the display and the other end to your computer's graphics card. DisplayPort is recommended for optimal performance.
• Kabel USB pro odchozí přenos: Connect the USB 3.0 upstream cable from the display's USB upstream port to an available USB port on your computer to enable the integrated USB 3.0 hub.
• Zvuk (volitelné): If your computer supports audio output via DisplayPort or HDMI, the display can receive audio.

4.3 Montáž VESA

The display supports VESA 100 x 100mm mounting standards. To mount the display on a wall or an articulating arm, first remove the stand. Secure the VESA-compatible mount to the display using appropriate screws (not included). Follow the instructions provided with your VESA mounting kit.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

Press the power button located on the front bezel of the display to turn it on or off. The power indicator light will illuminate when the display is active.

5.2 Nabídka na obrazovce (OSD)

The display features touch-sensitive OSD controls integrated into the bezel. Use these controls to navigate and adjust display settings.

• Tlačítko nabídky: Přístup k hlavní nabídce OSD.
• Navigační tlačítka: Use the arrow icons to move through menu options.
• Tlačítko Vybrat/Zadat: Potvrzuje výběry nebo vstupuje do podnabídek.
• Tlačítko Konec: Returns to the previous menu or exits the OSD.

5.3 Výběr vstupu

To switch between video inputs (DisplayPort, HDMI, DVI-D, VGA), access the OSD menu and navigate to the "Input" or "Source" section. Select your desired input.

5.4 Úpravy obrazu

V nabídce OSD můžete upravit různá nastavení obrazu:

• Jas/kontrast: Upravte celkový jas a rozdíl mezi světlými a tmavými oblastmi.
• Nastavení barev: Upravte teplotu barev, gamu a jednotlivé úrovně RGB.
• Ostrost: Upravte jasnost detailů obrazu.
• Poměr stran: Select between various aspect ratio modes (e.g., Full, Aspect, 1:1).

5.5 Control Sync Technology

For multi-monitor setups, Control Sync technology allows you to control settings for up to six EA245WMI displays simultaneously. Designate one display as the master unit. Connect the DisplayPort 1.2 out from the master to the DisplayPort 1.2 in of the next display in the chain. Once configured, adjustments made on the master display will propagate to the linked displays.

5.6 Smart Sensing Technology

The display incorporates ambient light and human sensors to automatically adjust brightness. This feature optimizes power consumption and viewing comfort. Enable or disable this function through the OSD menu under "Eco Mode" or "Sensors."

5.7 Spektra View II Calibration

For precise color accuracy, use the included Spectra View II software and color calibration sensor. Install the software on your computer and follow the on-screen instructions to calibrate your display. This process ensures consistent and accurate color reproduction.

6. Konektivita

The NEC MultiSync EA245WMI-BK-SV offers a comprehensive range of connectivity options:

• DisplayPort 1.2 In/Out: Primary digital video input, supporting multi-stream transport (MST) for daisy-chaining multiple displays.
• HDMI: Multimediální rozhraní s vysokým rozlišením pro digitální video a audio vstup.
• DVI-D: Digital Visual Interface for digital video input.
• VGA: Analog video input for compatibility with older systems.
• USB 3.0 Hub (1 Upstream, 3 Downstream): Connect the upstream port to your computer to enable the three downstream ports for connecting peripherals.
• Zvukový vstup/výstup: For connecting external audio sources or headphones (if applicable, check specific model for audio jacks).

7. Údržba

Správná údržba zajistí dlouhou životnost a optimální výkon vašeho displeje.

• Čištění obrazovky: Jemně otřete obrazovku měkkým hadříkem, který nepouští vlákna. V případě odolných skvrn lehceampen the cloth with water or a specialized screen cleaner (non-ammonia based). Do not spray liquid directly onto the screen.
• Čištění Casing: Use a soft, dry cloth to wipe the display casing.
• Větrání: Periodically check that the ventilation openings on the display are free from dust and obstructions.
• Vypnout: Always power off and unplug the display before performing any cleaning or maintenance.

8. Řešení problémů

Pokud narazíte na problémy s displejem, podívejte se na následující běžné problémy a jejich řešení:

• Bez napájení:
  • Ensure the power cord is securely connected to the display and a working electrical outlet.
  • Zkontrolujte, zda je zásuvka funkční, zapojením jiného zařízení.
  • Stiskněte tlačítko napájení na displeji.
• Žádný obraz/signál:
  • Verify that the video cable (DisplayPort, HDMI, DVI-D, VGA) is securely connected to both the display and your computer.
  • Ujistěte se, že je v nabídce OSD vybrán správný vstupní zdroj.
  • Zkontrolujte nastavení zobrazení počítače a ujistěte se, že je monitor detekován a povolen.
  • Zkuste jiný video kabel nebo port, pokud je k dispozici.
• Image is Distorted or Incorrect Resolution:
  • Set your computer's display resolution to the native resolution of 1920 x 1200.
  • Adjust the refresh rate to 56 Hz (or compatible).
  • Check the video cable for damage.
• OSD Menu Not Responding:
  • Ensure no objects are obstructing the touch-sensitive controls.
  • Power cycle the display (turn off, unplug, wait 30 seconds, plug in, turn on).
• USB porty nefungují:
  • Ensure the USB 3.0 upstream cable is connected from the display to your computer.
  • Check your computer's device manager to see if the USB hub is recognized.

Pokud problém přetrvává i po vyzkoušení těchto kroků, kontaktujte zákaznickou podporu.

9. Specifikace

10. Záruka a podpora

For warranty information, please refer to the warranty card included with your product or visit the official NEC website. Technical support is available through NEC's customer service channels. Please have your model number (EA245WMI-BK-SV) and serial number ready when contacting support.

Online podpora: www.necdisplay.com/support