Swanstone MF0000FM.001
Swan White 22" x 24" Premium Floor Mount Laundry Sink User Manual
Model: MF0000FM.001
1. Úvod
Thank you for choosing the Swan White 22" x 24" Premium Floor Mount Laundry Sink. This manual provides essential information for the safe installation, operation, and maintenance of your new laundry sink. Please read all instructions carefully before beginning installation and retain this manual for future reference.
2. Důležité bezpečnostní informace
WARNING: Failure to follow these instructions could result in personal injury or property damage.
- Během instalace vždy používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
- Ujistěte se, že všechny vodovodní spoje jsou bezpečné a bez úniků, abyste zabránili poškození vodou.
- Do not overload the sink with excessive weight.
- Udržujte malé děti a domácí zvířata mimo dosah místa instalace.
- Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
3. Obsah balení
Před zahájením montáže se prosím ujistěte, že jsou všechny komponenty přítomny:
- 1 x Swan White Laundry Sink Tub
- 4 x Metal Support Legs
- 1 x Drain Assembly (pre-installed)
- Installation Hardware (screws, washers, etc.)
4. Nastavení a instalace
This section outlines the steps for assembling and installing your floor mount laundry sink. A faucet is not included and must be purchased separately.
4.1 Vybalení a kontrola
- Opatrně vyjměte všechny součásti z obalu.
- Inspect all parts for any signs of damage. Do not proceed with installation if any parts are damaged. Contact customer support.
4.2 Sestavení nohou
- Turn the sink tub upside down on a soft, protective surface to prevent scratching.
- Attach each of the four metal support legs to the designated mounting points on the underside of the sink tub using the provided hardware. Ensure they are securely fastened.
- Carefully turn the assembled sink upright.

An image showing the complete Swan White floor mount laundry sink with its four gray support legs assembled, ready for installation.
4.3 Faucet Installation (Faucet Not Included)
- The sink features pre-drilled 4-inch centers for faucet installation.
- Follow the manufacturer's instructions for your chosen faucet to install it onto the sink.
- Ensure all faucet connections are tightened properly to prevent leaks.
4.4 Vodovodní připojení
- Position the sink in its desired location, ensuring it is level.
- Connect the hot and cold water supply lines to the faucet inlets.
- Connect the sink's pre-installed drain assembly to your household's waste plumbing system.
- Turn on the water supply and check all connections for leaks. Tighten any leaking connections immediately.
5. Návod k obsluze
The Swan White Laundry Sink is designed for general utility and laundry tasks. Its operation is straightforward:
- Turn on the faucet to fill the sink with water for washing or soaking.
- Use the drain stopper (if included with your faucet) to retain water as needed.
- After use, remove the stopper to allow water to drain.
- Avoid pouring harsh chemicals or extremely hot liquids directly into the sink, as this may cause damage over time.
6. Péče a údržba
Your Swan White Laundry Sink is constructed from Veritek, a durable material designed for longevity and easy care.
6.1 Čištění
- Clean the sink regularly with warm water and a mild, non-abrasive liquid detergent.
- Wipe the surface with a soft cloth or sponge.
- Důkladně opláchněte čistou vodou a osušte měkkým hadříkem, abyste zabránili vzniku skvrn od vody.
- The Veritek material has no surface coating to chip or crack and is resistant to mold and mildew, simplifying cleaning.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals (e.g., acetone, paint thinner, strong acids/bases) as these can damage the finish.
6.2 Odstraňování skvrn
- Na odolné skvrny lze jemně nanést pastu z jedlé sody a vody a poté opláchnout.
- For more difficult stains, consult the Swanstone website for specific cleaning recommendations for Veritek surfaces.
7. Řešení problémů
This section addresses common issues you might encounter with your laundry sink.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Únik vody | Uvolněné vodovodní spoje; poškozená těsnění. | Check and tighten all water supply and drain connections. Inspect seals and replace if damaged. |
| Pomalé odvodnění | Drain clog; partially obstructed P-trap. | Remove the drain stopper and clear any debris. If necessary, disassemble and clean the P-trap. Use a plumbing snake for deeper clogs. |
| Sink is Unstable | Legs not securely fastened; uneven floor. | Ensure all four metal legs are tightly secured to the sink tub. Adjust leg levelers (if present) or shim legs to stabilize on an uneven floor. |
8. Specifikace
- Číslo modelu: MF0000FM.001
- Materiál: Veritek
- Barva: Bílý
- Rozměry produktu (D x Š x V): 21.63 x 23.03 x 32.94 palce
- Hmotnost položky: 28 libry
- Typ montáže: Montáž na podlahu
- Otvory pro kohoutky: Pre-drilled 4-inch centers
- Nohy: Four metal legs included
- Vypouštění: Installed drain
- Speciální vlastnosti: Will not mold or mildew, no surface coating to chip or crack
9. Informace o záruce
This Swan White Laundry Sink is covered by a Omezená 1-letá záruka from the date of purchase. This warranty covers defects in material and workmanship under normal use and service. It does not cover damage resulting from improper installation, abuse, misuse, accident, or normal wear and tear. For warranty claims or further details, please contact Swanstone customer support.
10. Zákaznická podpora
If you have any questions, require assistance with installation, or need to report a problem, please contact Swanstone customer support:
- online: Navštivte úředníka Swanstone Store on Amazon pro informace o produktech a zdroje podpory.
- Refer to your purchase documentation for additional contact methods.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.