Satco S9750 30W LED HID Replacement Light Bulb Instruction Manual

Zavedení

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.

Bezpečnostní informace

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení.
• Zajistěte přívod objtage is compatible with the bulb's operating voltage (100-277V).
• Žárovku nerozebírejte ani neupravujte. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• This bulb is suitable for use in damp locations and approved for totally enclosed fixtures.
• Always handle the bulb by its base to avoid damaging the LED panels.
• Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným elektrikářem.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.

• 1 x Satco S9750 30W LED HID Replacement Light Bulb

Nastavení a instalace

Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:

1. Odpojení napájení: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
2. Vyjměte starou žárovku: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
3. Obtok předřadníku: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltage 100-277V.
4. Zkontrolujte kompatibilitu zařízení: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
5. Instalace nové žárovky: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
6. Obnovit napájení: Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.

Návod k obsluze

The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.

• Nastavení úhlu paprsku: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
  • 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
  • 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
  • 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
• Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.

Údržba

LED žárovka Satco S9750 vyžaduje minimální údržbu.

• Čištění: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
• Inspekce: Pravidelně kontrolujte žárovku a svítidlo, zda nevykazují známky poškození nebo uvolněné kontakty.

Odstraňování problémů

If your Satco S9750 LED bulb is not functioning correctly, consider the following:

• Žádné světlo:
  • Zkontrolujte, zda je zapnuto napájení svítidla.
  • Ensure the bulb is screwed in tightly to the socket.
  • Verify that the ballast has been properly bypassed or removed.
  • Inspect the circuit breaker for any tripped circuits.
• Blikající světlo:
  • Ujistěte se, že je žárovka bezpečně usazena v objímce.
  • Zkontrolujte stabilní napájení.

If issues persist after performing these checks, contact customer support.

Specifikace

Záruka a podpora

Náhradní LED HID žárovka Satco S9750 je dodávána s 5letá omezená záruka.

For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.