WilTec Automatic 8-Egg Incubator Instruction Manual

Zavedení

This manual provides detailed instructions for the safe and efficient operation of your WilTec Automatic 8-Egg Incubator. Designed for small-scale incubation, this unit features precise electronic temperature control and an automatic egg-turning mechanism to ensure optimal hatching conditions. Please read this manual thoroughly before first use to achieve successful incubation results.

The incubator is suitable for various poultry eggs, such as chicken, quail, and duck eggs, as well as reptile eggs. Always verify egg size and required incubation temperatures for specific species.

Image: The WilTec Automatic 8-Egg Incubator, fully assembled and ready for use. It features a clear top cover and a compact design.

Bezpečnostní pokyny

• Always place the incubator on a stable, level surface away from direct sunlight, drafts, and extreme temperature fluctuations.
• Ujistěte se, že napájecí zdroj odpovídá objtagpožadavky uvedené na zařízení.
• Do not immerse the incubator or its electrical components in water or any other liquid.
• Keep the incubator out of reach of children and pets.
• Před čištěním nebo prováděním jakékoli údržby odpojte přístroj ze zásuvky.
• Do not operate the incubator if the power cord or plug is damaged. Contact customer support for assistance.
• Use the polystyrene transport protection as additional thermal insulation during operation, if desired.

Obsah balení

Po vybalení ověřte, zda jsou všechny součásti přítomny a nepoškozené:

• WilTec Automatic 8-Egg Incubator unit
• Napájecí kabel
• Polystyrene protective packaging (can be used for insulation)
• Návod k použití (tento dokument)

Image: The incubator's main components, including the base with the egg turning mechanism, the transparent cover, and the power cord.

Image: The incubator housed within its protective polystyrene packaging, which can also serve as additional insulation.

Nastavení

1. Vybalení inkubátoru: Carefully remove all components from the packaging. Retain the polystyrene packaging for potential use as additional insulation.
2. Umístění: Position the incubator on a flat, stable surface in a room with a consistent ambient temperature, away from direct sunlight, drafts, and heat sources.
3. Naplňte vodní nádrž: Locate the water reservoir at the bottom of the incubator. Fill it with distilled or demineralized water to the appropriate level. This helps regulate humidity. Avoid overfilling.
4. Připojte napájení: Plug the power cable into the incubator and then into a suitable electrical outlet. The display should illuminate.
5. Předehřev: Allow the incubator to run for at least 2-3 hours before placing eggs inside. This stabilizes the internal temperature and humidity.

Návod k obsluze

Konec ovládacího paneluview

Image: The digital control panel displaying temperature and humidity, along with 'Set', '+', and '-' buttons and LED indicators for 'Work' and 'Set'.

The incubator features a dual display for temperature and humidity, along with LED indicators and control buttons.

• Zobrazení teploty: Shows the current internal temperature in Celsius.
• Displej vlhkosti: Shows the current internal humidity percentage.
• "Work" LED: Svítí, když je topné těleso aktivní.
• "Set" LED: Illuminates when in temperature setting mode.
• tlačítka: "Set" button to enter setting mode, "+" and "-" buttons to adjust values.

Nastavení teploty

1. Press the "Set" button once. The "Set" LED will light up, and the temperature display will flash.
2. Use the "+" and "-" buttons to adjust the desired incubation temperature (range: 25°C to 39.5°C). Refer to species-specific incubation charts for optimal temperatures.
3. Press the "Set" button again to confirm the setting and exit setting mode. The display will stop flashing.

Automatické otáčení vajec

The incubator is equipped with an automatic egg-turning mechanism that simulates natural turning by a hen. This prevents the embryo from sticking to the eggshell, which is crucial for successful hatching.

• The egg turning system operates automatically at regular intervals.
• Důležité: Approximately 3-4 days before the expected hatch date, the automatic turning system must be switched off. This allows the chicks to position themselves correctly for hatching. Consult an incubation calendar for specific timing.

Humidity Regulation

Humidity is regulated by the water in the reservoir at the bottom of the unit. Periodically check the water level and refill as needed with distilled or demineralized water. The humidity display provides a real-time reading.

Placing Eggs

Once the incubator has reached the desired stable temperature and humidity, carefully place the eggs into the designated slots in the turning mechanism. Ensure eggs are clean and fertile.

Údržba

• Čištění: After each incubation cycle, unplug the incubator and allow it to cool. Clean all internal surfaces with a mild disinfectant solution and a soft cloth. Ensure all parts are completely dry before storage or next use.
• Vodní nádrž: Regularly clean the water reservoir to prevent algae or bacterial growth.
• Skladování: Store the incubator in a clean, dry place, preferably in its original packaging, when not in use.

Odstraňování problémů

Specifikace

• Číslo modelu: 51269
• Kapacita: Up to 8 eggs (depending on size)
• Rozsah teplot: 25°C to 39.5°C (adjustable)
• Ovládání teploty: Automatický
• Otáčení vajec: Automatický
• Ovládání vlhkosti: Manual (via water reservoir)
• Zobrazit: Dual LED for Temperature and Humidity
• Ventilátor: Integrated for air circulation
• Rozměry (D x Š x V): Přibližně 32 x 32 x 30 cm
• Hmotnost: Přibližně 1.5 kg

Záruka a podpora

For warranty information, technical support, or spare parts, please contact WilTec customer service. Keep your purchase receipt as proof of purchase.

You can find contact information on the official WilTec webwebu nebo prostřednictvím svého prodejce.

WilTec Webmísto: www.wiltec.de (Napřampodkaz, skutečný odkaz se může lišit v závislosti na regionu)