Zavedení
The ThermoPro TP20 is a 500FT wireless meat thermometer designed to help you monitor food and oven temperatures remotely. Featuring dual probes, preset USDA-recommended temperatures, and a built-in timer, it simplifies cooking for perfect results every time. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.
Co je v krabici
- 1 x vysílací jednotka ThermoPro TP20
- 1 x ThermoPro TP20 Receiver Unit
- 2 x Stainless Steel Food Probes
- 1 x grilovací klip
- 4 x AAA baterie (součástí balení)
Nastavení
- Instalace baterie: Open the battery compartments on both the transmitter and receiver units. Insert the included AAA batteries, ensuring correct polarity (+/-). Close the compartments securely.
- Připojení sondy: Insert the stainless steel probes into the corresponding numbered jacks on the side of the transmitter unit.
- Zapnutí: Press the power button on both the transmitter and receiver units to turn them on. The units are pre-paired and should connect automatically.
Návod k obsluze
Monitorování teploty
The TP20 allows you to monitor two different temperatures simultaneously using its dual probes. One probe can be used for meat, and the other for ambient oven/grill temperature using the included grill clip.
Nastavení teplot
- Selecting Meat Type: Stiskněte tlačítko MASO button on the receiver to cycle through preset meat types (Beef, Pork, Lamb, Chicken, Fish, Poultry, Ham, Veal, BBQ, Program).
- Selecting Doneness (Taste): Po výběru druhu masa stiskněte tlačítko CHUŤ button to choose your desired doneness level (Rare, Medium Rare, Medium, Medium Well, Well Done).
- Vlastní nastavení teploty: To set a custom target temperature, select 'Program' under the MEAT setting. Use the UP a DOLŮ arrows to adjust the target temperature for Probe 1 or Probe 2.
Výběr jednotky teploty
Stiskněte tlačítko °F/°C button on the receiver to switch between Fahrenheit and Celsius temperature displays.
Funkce časovače
The TP20 includes a built-in timer that can count up or count down. Press the MODE button to switch to Timer mode. Use the UP a DOLŮ arrows to set the countdown time. Press S./S. to start/stop the timer. The timer can display hours/minutes or minutes/seconds.
Funkce alarmu
When the probe reaches the set target temperature, the receiver will beep and flash, alerting you that your food is ready. This feature helps prevent overcooking and ensures food safety.
Vzdálené monitorování
The TP20 offers a wireless range of up to 500 feet, allowing you to monitor your cooking from a distance. The receiver unit features a backlight for easy reading in low-light conditions.
Oficiální videa produktů
TP20S Classical Wireless Meat Thermometer Video
Toto video poskytuje podrobný přehledview and demonstration of the ThermoPro TP20S wireless meat thermometer's features and operation.
ThermoPro Live Exclusive Stream
An extended video from ThermoPro, showcasing various aspects and uses of their products, including the TP20 thermometer.
Údržba
- Čištění sond: Always clean the stainless steel probes thoroughly after each use with hot soapy water. Do not immerse the probe connectors or the main unit in water.
- Čištění jednotky: Wipe the transmitter and receiver units with a damp tkanina. Nepoužívejte abrazivní čisticí prostředky ani je neponořujte do vody.
- Skladování: Store the thermometer and probes in a dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
- Péče o sondu: Avoid bending or kinking the probe wires excessively, as this can damage the internal wiring. The probe wires can withstand temperatures up to 716°F (380°C).
Odstraňování problémů
- Problémy se signálem/připojením:
- Ensure both transmitter and receiver units are turned on and have fresh batteries.
- Verify that the probes are securely plugged into the transmitter.
- Move the receiver closer to the transmitter to check if the signal improves. Large metal objects or thick walls can interfere with the signal.
- Nepřesné údaje o teplotě:
- Ensure the probe tip is inserted into the thickest part of the meat, avoiding bone or gristle.
- Check if the probe wire is damaged. If so, replacement probes may be needed.
- Calibrate the thermometer if an option is available (refer to the full PDF manual for specific calibration steps if needed).
- Displej nefunguje:
- Vyměňte baterie v obou jednotkách.
- Ujistěte se, že kontakty baterie jsou čisté a bez koroze.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | ThermoPro |
| Název modelu | TP-20 |
| Technologie připojení | Rádiová frekvence (RF) |
| Bezdrátové Dosah | Až 500 stop |
| Počet sond | 2 (Dual Probe) |
| Teplotní rozsah | 14 °F až 572 °F (-10 °C až 300 °C) |
| Přesnost | ± 1.8 ° C |
| Doba odezvy | 3 sekund |
| Zdroj napájení | 4 x AAA baterie (součástí balení) |
| Typ zobrazení | Digitální s podsvícením |
| Vnější materiál | Nerezová ocel (sondy) |
| Hmotnost položky | 9.7 unce |
Záruka a podpora
ThermoPro products are designed for durability and performance. For detailed warranty information and customer support, please refer to the official ThermoPro website or the full user manual. You can download the complete user manual in PDF format for more in-depth information and specific troubleshooting steps:
Stáhnout kompletní uživatelskou příručku (PDF)
For further assistance, please contact ThermoPro customer service directly.