Neewer NW860RP90 Wireless DSLR Remote Control User Manual

1. Úvod

The Neewer NW860RP90 Wireless DSLR Remote Control system provides a convenient way to trigger your camera's shutter wirelessly, preventing camera shake and allowing for remote operation. This manual will guide you through the setup, operation, and maintenance of your remote control.

Obsah balení

• 1x Transmitter (NW-860 Tx)
• 1x Receiver (NW-860 Rx)
• 1x Connected Cable (for camera connection)
• 2 x 1.5V AAA Batteries (for transmitter)
• 1 x 3V CR-2 Lithium Battery (for receiver)

2. Nastavení

2.1 Instalace baterie

Ensure proper battery installation for both the transmitter and receiver before use.

Figure 1: Transmitter Battery Installation
Open the battery compartment on the back of the transmitter and insert two AAA batteries, observing polarity.

Figure 2: Receiver Battery Installation
Open the battery compartment on the back of the receiver and insert one CR-2 Lithium battery, observing polarity.

2.2 Připojení přijímače k ​​fotoaparátu

The receiver connects to your camera's remote control port using the provided cable.

Figure 3: Receiver Connected to Camera
Attach the receiver to your camera's hot shoe (optional, for stability) and connect the cable from the receiver to your camera's remote port. Ensure the cable is securely plugged into both devices.

Figure 4: Connection Cable Detail
The cable features a 2.5mm jack for the receiver and a micro-USB connector for compatible Fujifilm cameras.

3. Návod k obsluze

The remote control offers various shooting modes to suit your photographic needs.

Figure 5: Transmitter Controls
Familiarize yourself with the buttons and switches on the transmitter.

3.1 Shutter Release Function

• Namáčknutí: Lightly press the shutter button on the transmitter to activate your camera's autofocus system. The camera will focus on your subject.
• Full-Press: Press the shutter button completely down to trigger the camera's shutter and take a photograph.

3.2 Režimy snímání

The transmitter supports the following shooting modes, selectable via the switch on the device:

• Jediný výstřel: For taking a single photograph with each full press of the shutter button.
• Nepřetržitý záběr: For taking multiple photographs in quick succession as long as the shutter button is held down.
• Bulb Setting: Allows for extended exposure times. In this mode, the shutter remains open for as long as the shutter button is held down.
• 4-Second Delay: Triggers the shutter after a 4-second delay, useful for self-portraits or ensuring complete camera stability.

3.3 Kompatibilní fotoaparáty

This remote control is compatible with the following Fujifilm camera models (replacement for Fuji RR-90):

• FinePix S1
• Fujifilm X-T1
• Fujifilm X-T10
• Fujifilm X-E2
• Fujifilm X-M1
• Fujifilm X-A2
• Fujifilm X-A1
• Fujifilm X100T
• Fujifilm X30
• Fujifilm XQ2
• Fujifilm XQ1

4. Údržba

Abyste zajistili dlouhou životnost a optimální výkon vašeho dálkového ovladače, dodržujte tyto pokyny pro údržbu:

• Čištění: Use a soft, dry cloth to clean the exterior of the remote control. Do not use liquid cleaners or solvents.
• Péče o baterie: Pokud dálkový ovladač nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení a poškození.
• Skladování: Dálkový ovladač skladujte na chladném a suchém místě mimo přímé sluneční světlo a extrémní teploty.
• Vyhněte se dopadu: Chraňte zařízení před pády a nárazy, které by mohly poškodit vnitřní součásti.

5. Řešení problémů

If you encounter issues with your Neewer NW860RP90 remote control, refer to the following common problems and solutions:

• Remote control does not trigger the camera:
  • Zkontrolujte, zda jsou baterie správně vloženy a zda jsou dostatečně nabité. V případě potřeby je vyměňte.
  • Ensure the connection cable is securely plugged into both the receiver and the camera's remote port.
  • Verify that your camera is set to a compatible remote control mode (refer to your camera's manual).
  • Ensure the receiver is powered on (if applicable).
• Omezený dosah nebo přerušované připojení:
  • Replace batteries in both the transmitter and receiver.
  • Ujistěte se, že mezi vysílačem a přijímačem nejsou žádné významné překážky.
  • Vyhněte se silným zdrojům elektromagnetického rušení.
• Camera does not autofocus when half-pressing:
  • Check camera settings to ensure autofocus is enabled.
  • Ensure the half-press action is firm enough to activate the camera's autofocus.

6. Specifikace

7. Záruka a podpora

Neewer products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Neewer webUschovejte si doklad o koupi pro případné reklamace.