Konec produktuview
Popis produktu
Turtle Wax Power Foam Bug & Tar Remover utilizes a super clinging foam that creates an extended dwell time. This allows advanced natural solvent technology, tar cutters, and bug dissolving chemistry to deeply penetrate and loosen contaminants for easier removal. The foam effectively clings to vertical surfaces and can be sprayed into hard-to-reach areas, ensuring thorough contact cleaning. Once the foam collapses into a liquid, simply wipe or wash off the residue. This product is designed to let the foam do the work, simplifying the cleaning process.
Klíčové vlastnosti
- Super clinging foam penetrates and dissolves bugs, tar, and sap.
- Can be used as a pre-wash treatment or for targeted spot cleaning.
- Formulated to deliver streak-free results on various surfaces including paint, glass, metal, and plastic.
- Wide spray foam quickly covers large areas for efficient application.
Image: The Turtle Wax Power Foam Bug & Tar Remover can, held by a hand, positioned above the grille of a red vehicle, showcasing používaného produktu.
Bezpečnostní informace
Please read and understand all safety precautions before using this product. Failure to follow these instructions may result in injury or property damage.
- Uchovávejte mimo dosah: Store this product away from children and pets.
- Eye and Skin Contact: Avoid direct contact with eyes and skin. In case of contact, rinse affected areas thoroughly with water for several minutes. If irritation persists, seek medical attention.
- Větrání: Use in a well-ventilated outdoor area. Avoid inhaling spray mist.
- Požití: Do not ingest. If swallowed, do not induce vomiting. Immediately call a poison control center or doctor.
- Pressurized Container: Contents are under pressure. Do not puncture or incinerate the container. Do not expose to heat or store at temperatures above 120°F (49°C).
- Kompatibilita povrchu: Always test the product on an inconspicuous area first to ensure compatibility and prevent potential damage to delicate surfaces.
Nastavení
Proper preparation ensures optimal results and safety.
- Chladný povrch: Ensure the vehicle surface is cool to the touch and out of direct sunlight. Applying to a hot surface can cause the product to dry too quickly, leading to streaks or reduced effectiveness.
- Dobře protřepat: Shake the can vigorously for at least 30 seconds before each use to ensure the product is properly mixed and produces consistent foam.
- Protect Adjacent Areas: If necessary, cover or mask off any areas not intended for treatment to prevent overspray.
Návod k obsluze
Postupná aplikace
1. Spray Application: Hold the can approximately 6-8 inches (15-20 cm) from the surface. Spray a generous amount of foam directly onto the affected area, ensuring complete coverage of bugs, tar, or sap deposits.
Image: A person spraying Turtle Wax Power Foam Bug & Tar Remover onto the front grille of a red vehicle, demonstrating the wide spray pattern and initial application.
2. Allow to Dwell: Allow the foam to cling to the surface and penetrate the contaminants for 1-3 minutes. The foam will gradually begin to collapse into a liquid, which indicates that it is actively working to dissolve the residue.
Image: A person applying Turtle Wax Power Foam Bug & Tar Remover to the hood of a red vehicle, showing the foam spreading across the surface and beginning its dwell time.
3. Wipe or Wash Off: Once the foam has collapsed, gently wipe the treated area with a clean, soft microfiber towel. Alternatively, you can wash off the product with water. For particularly stubborn residues, a second application or light agitation with a soft brush or sponge may be necessary before wiping.
Image: A person wiping the hood of a red vehicle with a green microfiber towel after applying Turtle Wax Power Foam Bug & Tar Remover, effectively removing dissolved contaminants.
4. Rinse and Dry: Rinse the entire treated area thoroughly with clean water to remove any remaining product and loosened contaminants. Dry the surface immediately with a separate clean, dry microfiber towel to prevent water spots and achieve a streak-free finish.
Video ukázka
For a visual guide on how to effectively use Turtle Wax Power Foam Bug & Tar Remover, please watch the official demonstration video below.
Video: An official demonstration showing the application and removal process of Turtle Wax Power Foam Bug & Tar Remover on a vehicle, highlighting its effectiveness in cleaning various surfaces.
Údržba
Proper storage ensures the longevity and effectiveness of your product.
- Podmínky skladování: Store the product in a cool, dry place, away from direct sunlight, open flames, and other heat sources.
- Bezpečný uzávěr: Always ensure the cap is securely replaced after each use to prevent accidental discharge, leakage, or contamination.
- Teplota: Do not store in areas where temperatures may drop below freezing or exceed 120°F (49°C).
Odstraňování problémů
Běžné problémy a řešení
| Problém | Možná příčina | Řešení |
|---|---|---|
| Residue remains after first application | Stubborn or heavily baked-on bugs/tar/sap | Apply a second coat and allow for a longer dwell time (up to 5 minutes). Gently agitate with a soft brush or sponge before wiping. |
| Product not foaming correctly | Can not shaken sufficiently or cold temperature | Shake the can vigorously for at least 30 seconds before use. Ensure product is at room temperature before application. |
| Streaks on surface | Insufficient rinsing or product left to dry on surface | Rinse the area thoroughly with water immediately after wiping. Ensure the surface is completely dry with a clean microfiber towel. Avoid using in direct sunlight or on hot surfaces. |
Specifikace
- Značka: Želví vosk
- Číslo modelu: 50595
- Formulář položky: Aerosol
- Objem: 16.0 Ounce (approximately 473 ml)
- Specifická použití: Designed for effective removal of tar, bugs, and tree sap from vehicle surfaces.
- UPC: 074660505953
- Hmotnost položky: 16 unce
Záruka a podpora
This Turtle Wax product is covered by a 1letá záruka výrobce from the date of purchase. This warranty typically covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any product-related inquiries, please contact the manufacturer directly.
- Výrobce: Želví vosk
- Oficiální Webmísto: www.turtlewax.com
- Kontaktní údaje: Please refer to the product packaging or the official Turtle Wax webweb, kde najdete nejaktuálnější kontaktní údaje zákaznického servisu, včetně telefonních čísel a e-mailové podpory.