Casio G-SHOCK AWG-M100SB-2A Radio Wave Solar Watch User Manual

Zavedení

This manual provides essential instructions for the proper use and maintenance of your Casio G-SHOCK AWG-M100SB-2A watch. This timepiece features G-SHOCK's renowned shock resistance, 100-meter water resistance, Tough Solar power, and Multi-Band 6 radio-controlled timekeeping for accurate time synchronization.

Please read this manual thoroughly to ensure correct operation and to take full advantage of your watch's capabilities. Keep this manual for future reference.

Obrázek 1: Přední strana view of the Casio G-SHOCK AWG-M100SB-2A watch, displaying its analog and digital elements.

Nastavení

1. Počáteční poplatek

Your watch is equipped with Tough Solar power. Before initial use, expose the watch face to bright light for several hours to ensure it is adequately charged. Avoid prolonged storage in dark places to prevent the power level from dropping.

2. Setting Your Home City

The Home City setting is crucial for correct time display and radio signal reception. To set your Home City:

1. V režimu měření času podržte stisknuté tlačítko UPRAVIT button (top left) for approximately two seconds until the city code starts to flash.
2. Použijte ZVRÁTIT (vpravo nahoře) a VPŘED (bottom right) buttons to select your desired city code.
3. Stiskněte tlačítko MODE button (bottom left) to cycle through other settings (DST, 12/24-hour format, etc.) and adjust as needed using the ZVRÁTIT a VPŘED tlačítka.
4. Stiskněte UPRAVIT pro opuštění obrazovky nastavení.

3. Time Calibration (Radio Wave Reception)

The watch automatically receives time calibration signals. For optimal reception, place the watch near a window at night. You can also perform manual reception:

1. V režimu měření času podržte stisknuté tlačítko VPŘED button (bottom right) for approximately two seconds.
2. The watch will attempt to receive the calibration signal. This process can take several minutes.
3. After reception, the display will show 'GET' if successful, or 'ERR' if unsuccessful.

Obrázek 2: Detail view of the watch dial, highlighting the analog hands, digital displays, and button labels (ADJUST, REVERSE, MODE, FORWARD).

Provozní

Funkce tlačítek

• UPRAVIT (Top Left): Used to enter and exit setting modes, and to confirm settings.
• MODE (Bottom Left): Cycles through the watch's different modes (Timekeeping, World Time, Stopwatch, Countdown Timer, Alarm).
• ZVRÁTIT (Top Right): Used to scroll backward through settings or increase values.
• VPŘED (Bottom Right): Used to scroll forward through settings, decrease values, or initiate manual radio signal reception.

Obrázek 3: Strana view of the watch, illustrating the placement and labels of the control buttons.

Navigace v režimu

Stiskněte tlačítko MODE tlačítko pro přepínání mezi následujícími funkcemi:

• Režim měření času: Zobrazuje aktuální čas a datum.
• Režim světového času: View the current time in various cities around the globe.
• Režim stopek: Změřte uplynulý čas.
• Režim odpočítávacího časovače: Set a countdown from a specified time.
• Režim alarmu: Set up to five daily alarms and an hourly časový signál.

Osvětlení

Stiskněte tlačítko ZVRÁTIT button (top right) in Timekeeping Mode to activate the LED light for illumination of the analog dial. The duration of the illumination can be adjusted in the settings.

Hand Shift Feature

If the analog hands obstruct the digital displays, you can temporarily shift them. In any mode, hold down the MODE button for approximately two seconds. The hands will move to a position that does not block the digital displays. To return the hands to normal timekeeping, press any button.

Údržba

Čištění

Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, use a soft cloth dampened with water and a mild neutral detergent, then wipe dry.

Voděodolnost

This watch is water resistant to 100 meters. It is suitable for swimming and snorkeling. Do not operate any buttons while the watch is wet or submerged in water.

Správa napájení

To maintain optimal power levels, expose the watch face to light whenever possible. Avoid storing the watch in dark places for extended periods, as this can deplete the battery and affect functionality.

Odstraňování problémů

• Nesprávné zobrazení času:
  Check your Home City setting. Ensure the watch is receiving time calibration signals. If automatic reception is not working, try manual reception. If the analog hands do not match the digital time, perform a hand alignment correction (refer to the full manual for detailed steps).
• No Display or Low Power Indicator:
  The watch may be low on power. Expose the watch face to bright light for several hours to charge it.
• Tlačítka nereagují:
  Ensure the watch is not in a frozen state due to low power. If the issue persists after charging, a full reset might be necessary (consult the comprehensive Casio module manual for your specific module number, usually found on the case back).

Specifikace

Obrázek 4: Zadní view of the watch, showing the stainless steel case back with model and water resistance markings.

Informace o záruce

For detailed warranty information, please refer to the warranty card included with your purchase or contact your retailer. Casio's official website may also provide regional warranty details.

Podpora

Should you require further assistance or have questions not covered in this manual, please visit the official Casio website or contact Casio customer support in your region. Ensure you have your watch's model number (AWG-M100SB-2A) ready when seeking support.