iTouchless 18 Gallon Touchless Sensor Trash Can User Manual

1. Konec produktuview

The iTouchless 18 Gallon Touchless Sensor Trash Can (Model IT18RC-1) is an automatic, hands-free waste receptacle designed for convenience and hygiene. Featuring a motion-sensor lid, an AbsorbX odor filter system, and mobile caster wheels, this stainless steel trash can is suitable for various environments.

Figure 1: iTouchless 18 Gallon Touchless Sensor Trash Can (Model IT18RC-1)

2. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• Tělo odpadkového koše z nerezové oceli
• Sensor Lid Assembly
• AbsorbX Odor Filter (1 installed, 1 spare)
• Odor Filter Compartment Frame
• 4 pojezdová kola
• Retainer Ring for Trash Bag
• Uživatelská příručka

Note: 4 D-size batteries and an AC power adapter are not included and must be purchased separately.

3. Pokyny k nastavení

3.1 Installing Caster Wheels

1. Carefully turn the trash can body upside down on a soft, clean surface to prevent scratches.
2. Insert each of the 4 caster wheels into the designated slots on the bottom of the trash can. Push firmly until they click into place.
3. Ensure all wheels are securely attached and can rotate freely.
4. Return the trash can to an upright position.

Figure 2: Caster wheel installation detail.

3.2 Powering the Unit (Batteries or AC Adapter)

The trash can can be powered by 4 D-size batteries or an optional AC power adapter.

Instalace baterie:

1. Vyhledejte přihrádku na baterie na spodní straně víka senzoru.
2. Otevřete kryt bateriového prostoru.
3. Insert 4 new D-size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

AC Adapter Connection (Optional):

1. Locate the power input jack on the back of the sensor lid.
2. Plug the AC adapter into the power input jack.
3. Zapojte druhý konec AC adaptéru do standardní zásuvky.

Figure 3: Power options: 4 D-size batteries or optional AC adapter.

3.3 Installing the AbsorbX Odor Filter

1. Locate the odor filter compartment on the underside of the sensor lid.
2. Otevřete kryt přihrádky filtru.
3. Insert one AbsorbX odor filter into the compartment.
4. Bezpečně zavřete kryt přihrádky filtru.

Figure 4: AbsorbX odor filter installation.

3.4 Installing a Trash Bag

1. Remove the sensor lid from the trash can body.
2. Place a standard 18-gallon trash bag into the can.
3. Secure the top edge of the trash bag under the retainer ring to prevent it from slipping.
4. Replace the sensor lid onto the trash can body, ensuring it is properly aligned.

4. Návod k obsluze

4.1 Automatic Sensor Operation

The iTouchless trash can features a motion sensor for hands-free operation.

• To open the lid, simply approach the sensor area (located on the front of the lid) with your hand or an object. The lid will open automatically.
• The lid will remain open as long as the sensor detects motion. Once motion is no longer detected, the lid will close automatically after approximately 5 seconds.
• The VisioSense technology ensures the lid stays open for longer clean-ups, while Refix Technology prevents the lid from closing on your hand.

Figure 5: Automatic sensor operation.

4.2 Manual Open/Close and Stay-Open Mode

For extended use or specific situations, the lid can be operated manually.

• Manuální otevření: Press the 'OPEN' button on the sensor panel to open the lid.
• Manual Close: Press the 'CLOSE' button on the sensor panel to close the lid.
• Stay-Open Mode: If the lid is opened manually using the 'OPEN' button, it will remain open until the 'CLOSE' button is pressed, or after approximately 5 minutes of inactivity. This is useful for tasks requiring continuous access to the trash can.

5. Údržba

5.1 Cleaning the Trash Can

• The stainless steel body is fingerprint-proof and smudge-resistant. Clean with a soft, damp hadříkem a jemným čisticím prostředkem. Nepoužívejte abrazivní čisticí prostředky ani drátěnky, které by mohly poškodit povrchovou úpravu.
• Wipe the sensor area on the lid with a dry, soft cloth to ensure optimal performance. Do not immerse the lid in water.

5.2 Replacing the AbsorbX Odor Filter

For optimal odor control, replace the AbsorbX odor filter every 3 months or as needed.

1. Open the odor filter compartment on the underside of the sensor lid.
2. Remove the old filter and dispose of it.
3. Insert a new AbsorbX odor filter into the compartment.
4. Bezpečně zavřete kryt přihrádky filtru.

Tip: You can sign up for free text message reminders to replace your AbsorbX Odor Filter. Refer to the iTouchless webstránky pro podrobnosti.

5.3 Výměna baterií

If the lid's sensor operation becomes sluggish or stops working, it may be time to replace the batteries.

1. Locate and open the battery compartment on the underside of the sensor lid.
2. Vyjměte staré baterie velikosti D.
3. Insert 4 new D-size batteries, ensuring correct polarity (+/-).
4. Bezpečně zavřete kryt bateriového prostoru.

6. Řešení problémů

If you encounter issues with your iTouchless trash can, refer to the following common problems and solutions:

7. Specifikace

Obrázek 6: Rozměry produktu.

8. Záruka a zákaznická podpora

iTouchless products are designed for quality and reliability. Your 100% satisfaction is assured and backed by a Full-Service Manufacturer's Warranty and Dedicated Customer Support.

For warranty details, product registration, or technical assistance, please visit the official iTouchless webnebo kontaktujte přímo zákaznickou podporu.

Kontaktní údaje:

• Webmísto: www.itouchless.com
• Refer to product packaging or the iTouchless webweb, kde najdete nejaktuálnější kontaktní údaje zákaznické podpory.