1. Úvod
Thank you for choosing the KOSO XR-SRN Universal Gauge BB017B60. This high-quality instrument is designed to provide essential vehicle information for various motorcycle applications. It features a clear display for speed, RPM, odometer, trip meter, and other vital functions. This manual provides detailed instructions for proper installation, operation, and maintenance to ensure optimal performance and longevity of your gauge.
Obrázek 1: KOSO XR-SRN Universal Gauge BB017B60. This image displays the front view of the KOSO XR-SRN Universal Gauge, highlighting its digital display and button layout.
2. Bezpečnostní informace
Před instalací a provozem si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k poškození produktu, majetku nebo zranění osob.
- Doporučená profesionální instalace: Installation should be performed by a qualified technician to prevent damage to the gauge or vehicle's electrical system.
- Odpojení napájení: Před prováděním jakýchkoli elektrických prací vždy odpojte baterii vozidla.
- Zapojení: Ensure all wiring connections are secure, insulated, and routed away from hot or moving parts.
- Voděodolnost: While the gauge is designed to be weather-resistant, avoid direct high-pressure water spray.
- Operace: Do not attempt to adjust settings or operate the gauge while riding, as this can distract you and lead to accidents.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- KOSO XR-SRN Universal Gauge (BB017B60)
- Kabelový svazek
- Montážní konzola a hardware
- Speed Sensor with Magnet
- Uživatelská příručka
4. Nastavení a instalace
Follow these steps for proper installation of your KOSO XR-SRN Universal Gauge.
4.1 Mounting the Gauge
- Select a suitable location on your motorcycle's dashboard or handlebars that provides clear visibility and does not obstruct your view nebo ovládací prvky.
- Attach the mounting bracket to the chosen location using the provided hardware. Ensure it is securely fastened.
- Mount the KOSO XR-SRN gauge onto the bracket. Adjust the angle for optimal viewIng.
An image showing the gauge mounted on a motorcycle handlebar would typically be included here.
4.2 Zapojení kabeláže
Refer to the wiring diagram provided with your gauge for specific color codes. General connections are as follows:
- Červený drát: Connect to a switched 12V power source (ignition ON).
- Černý drát: Připojte k uzemnění vozidla.
- Oranžový drát: Connect to constant 12V power source (battery +) for memory retention.
- Žlutý drát: Connect to speed sensor signal input.
- Zelený drát: Connect to RPM signal input (e.g., ignition coil negative, CDI, or ECU signal).
- Modrý drát: Connect to high beam indicator.
- Light Blue Wire: Connect to left turn signal indicator.
- Dark Blue Wire: Connect to right turn signal indicator.
A detailed wiring diagram showing connections to the motorcycle's electrical system would typically be included here.
4.3 Instalace snímače rychlosti
- Mount the speed sensor to a non-rotating part of the wheel assembly, ensuring it is stable and does not interfere with moving parts.
- Attach the magnet to a rotating part of the wheel (e.g., brake disc, wheel spoke) so that it passes within 2-5mm of the sensor head with each rotation.
- Route the sensor cable securely, avoiding heat sources and moving components.
An image illustrating the correct placement of the speed sensor and magnet would typically be included here.
4.4 Počáteční nastavení a kalibrace
After installation, turn on the ignition. The gauge will power on. You may need to perform initial calibration:
- Obvod kola: Enter the circumference of your front wheel in millimeters. This is crucial for accurate speed and distance readings. Refer to your tire specifications or measure manually.
- RPM Pulses: Set the correct number of ignition pulses per revolution for your engine type. Consult your vehicle's service manual if unsure.
- Výběr jednotky: Select desired units (e.g., km/h or mph).
An image showing the gauge in setup mode would typically be included here.
5. Návod k obsluze
The KOSO XR-SRN Universal Gauge features intuitive button controls for navigating its functions.
5.1 Funkce tlačítek
- Tlačítko MODE: Press briefly to cycle through display modes (e.g., Odometer, Trip A, Trip B, Max Speed, Max RPM). Press and hold to enter settings menu.
- Tlačítko SET: Used to confirm selections or adjust values within the settings menu.
An image highlighting the MODE and SET buttons on the gauge would typically be included here.
5.2 Režimy zobrazení
The gauge can display various information:
- Rychlost: Aktuální rychlost jízdy.
- RPM: Engine revolutions per minute.
- Počítadlo kilometrů: Total accumulated distance. This value cannot be reset.
- Trip A/B: Resettable trip distance counters.
- Hodiny: Zobrazení času.
- svtage: Autobaterie objtage.
6. Údržba
Proper maintenance ensures the longevity and accuracy of your KOSO XR-SRN Universal Gauge.
- Čištění: Clean the gauge display and body with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Spojení: Periodically check all wiring connections for corrosion or looseness. Ensure they are secure and insulated.
- Kontrola senzoru: Inspect the speed sensor and magnet for damage or misalignment. Ensure the gap between them is within the specified range (2-5mm).
7. Řešení problémů
If you encounter issues with your gauge, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Gauge does not power on | No power supply; Blown fuse; Loose wiring | Check 12V power connections (Red, Orange wires); Inspect vehicle fuse; Secure all wiring. |
| Nesprávné měření rychlosti | Incorrect wheel circumference setting; Faulty speed sensor; Sensor/magnet misalignment | Verify wheel circumference setting; Check speed sensor wiring; Adjust sensor/magnet gap. |
| No RPM reading | Incorrect RPM pulse setting; Faulty RPM signal connection | Verify RPM pulse setting; Check Green wire connection to ignition signal. |
| Display flickering or erratic behavior | Unstable power supply; Electrical interference | Zkontrolujte objem baterietage and connections; Ensure proper grounding; Route wires away from high-voltage kabely. |
If the problem persists after attempting these solutions, please contact KOSO customer support.
8. Specifikace
Key technical specifications for the KOSO XR-SRN Universal Gauge BB017B60:
- Model: BB017B60
- Značka: KOSO
- Provozní svtage: DC 12V
- Rozsah zobrazení rychlosti: 0–360 km/h (0–225 mph)
- RPM Display Range: 0-15,000 ot./min
- Odometer Display Range: 0-99,999 km (miles)
- Trip Meter Display Range: 0-999.9 km (miles)
- Rozměry: (Refer to product diagram for exact measurements)
- Hmotnost: (Refer to product specifications)
9. Záruka a podpora
KOSO products are manufactured to high-quality standards. This product comes with a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KOSO webmísto.
For technical support, troubleshooting assistance, or spare parts, please contact KOSO customer service through their official website or authorized distributors. When contacting support, please have your product model (BB017B60) and purchase information readily available.
Official KOSO Webmísto: www.koso.com.tw