LyxPro SPA12BAT

Uživatelská příručka k 12palcovému aktivnímu PA reproduktorovému systému s dobíjecí baterií LyxPro SPA-12BAT

Model: SPA12BAT

Zavedení

Thank you for choosing the LyxPro SPA-12BAT 12-Inch Active PA Rechargeable Battery Speaker System. This manual provides essential information for the safe and efficient operation of your speaker system. Please read it thoroughly before use and retain it for future reference.

The LyxPro SPA-12BAT is a versatile, portable PA system designed for various applications, featuring Bluetooth connectivity, MP3 playback via USB and SD card, and integrated wireless microphone support. Its rechargeable battery and wheeled design ensure portability and convenience for both indoor and outdoor use.

Bezpečnostní pokyny

  • Neotevírejte kryt reproduktoru. Veškerý servis svěřte kvalifikovanému personálu.
  • Chraňte jednotku před vodou, vlhkostí a extrémními teplotami.
  • Zajistěte dostatečné větrání. Neblokujte žádné větrací otvory.
  • Používejte pouze napájecí adaptér dodaný s jednotkou.
  • Chraňte napájecí kabel před pošlapáním nebo přiskřípnutím.
  • Čistěte pouze suchým hadříkem.
  • Vyhněte se delšímu poslechu při vysoké hlasitosti, abyste předešli poškození sluchu.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

  • LyxPro SPA-12BAT 12-Inch Active PA Speaker System
  • 2 Wireless Hand-held Microphones
  • Bezdrátové dálkové ovládání
  • Napájecí kabel
LyxPro SPA-12BAT speaker system with included accessories: two wireless microphones, remote control, and power cable.

Image: The LyxPro SPA-12BAT speaker system shown with its complete set of accessories, including two wireless microphones, a remote control, and a power cable.

Konec produktuview

Klíčové vlastnosti

  • 12-inch active PA speaker with built-in ampdoživotní
  • Rechargeable battery for portable operation
  • Připojení Bluetooth pro bezdrátové streamování zvuku
  • MP3 playback via USB and SD card slots
  • Integrated EQ control section
  • Multiple input options: XLR, 1/4" (Mic/Line), RCA, 3.5mm AUX
  • Two wireless microphone inputs with individual volume controls
  • Foldable carry handle and easy-carry wheels for portability
  • Ability to link multiple speakers via XLR output

Schéma ovládacího panelu

Rear control panel of the LyxPro SPA-12BAT speaker, showing inputs, controls, and power switch.

Obrázek: Podrobný view of the LyxPro SPA-12BAT rear control panel, illustrating the layout of inputs, volume knobs, EQ controls, and the power switch.

The rear panel houses all essential controls and input/output connections. Familiarize yourself with the layout:

  • Sekce MP3 přehrávače: USB port, SD card slot, Mode button, Play/Pause, Skip tracks, and display.
  • Ovládání EQ: Knobs for adjusting Treble, Bass, and overall Volume.
  • Vstupy mikrofonu: XLR and 1/4" inputs with individual volume controls and Mic/Line switch.
  • RCA & 3.5mm (1/8") Input: Pro připojení externích audio zařízení.
  • Wireless Mic Controls: Volume knobs for wireless microphones.
  • Linkový výstup: XLR output for linking to other active speakers.
  • Vypínač: Zapíná nebo vypíná jednotku.
  • Napájení: AC input for charging and continuous power.
  • Vstup DC 12V: Pro externí zdroj napájení 12V.

Nastavení

Nabíjení baterie

Before initial use, fully charge the speaker's internal battery. Connect the power cable to the AC input on the rear panel and plug it into a standard wall outlet. The charging indicator light will illuminate. A full charge typically takes approximately 4 hours. The speaker can be used while charging.

Zapnutí/vypnutí

Locate the Power Switch on the rear panel. Flip the switch to the 'ON' position to power on the speaker. Flip it to 'OFF' to power down the unit.

Montáž reproduktoru

The SPA-12BAT features a standard pole mount socket on its base, allowing it to be placed on a compatible speaker stand for optimal sound dispersion.

LyxPro SPA-12BAT speaker mounted on a speaker stand, with a close-up of the stand mount.

Image: The LyxPro SPA-12BAT speaker positioned on a tripod speaker stand, demonstrating its compatibility with standard mounting equipment. A close-up shows the secure fit of the speaker onto the stand pole.

Návod k obsluze

Bluetooth připojení

  1. Power on the SPA-12BAT speaker.
  2. Press the 'MODE' button on the MP3 player section until 'Bluetooth' is displayed.
  3. Na zařízení s podporou Bluetooth (chytrý telefon, tablet atd.) vyhledejte dostupná zařízení.
  4. Select 'LyxPro SPA-12BAT' from the list to pair.
  5. Po spárování můžete bezdrátově streamovat zvuk ze zařízení do reproduktoru.

Přehrávání z USB/SD karty

  1. Insert a USB flash drive or SD card containing MP3/WMA audio files into the respective slot on the MP3 player section.
  2. The speaker should automatically switch to USB or SD mode and begin playback. If not, press the 'MODE' button to select the correct source.
  3. Use the Play/Pause and Skip buttons on the control panel or remote control to manage playback.

Použití mikrofonu

The SPA-12BAT supports both wired and wireless microphones.

  • Drátové mikrofony: Connect a wired microphone to either the XLR or 1/4" MIC input. Adjust the corresponding volume knob. Ensure the Mic/Line switch is set to 'Mic'.
  • Bezdrátové mikrofony: The included wireless microphones are pre-paired. Simply turn them on and adjust their volume using the 'VHF WIRELESS MICROPHONES' volume knobs on the control panel.

Připojení externích zařízení

Use the RCA inputs or the 3.5mm (1/8") input to connect other audio sources like CD players, laptops, or other instruments. Adjust the 'LINE IN' volume knob as needed.

Close-up of the control panel highlighting universal connectivity options: SD card slot, USB port, Bluetooth, 1/4 inch AUX, and 3.5mm input.

Obrázek: Podrobný view of the LyxPro SPA-12BAT's control panel, emphasizing the various input options including SD card, USB, Bluetooth, 1/4-inch auxiliary, and 3.5mm jack, illustrating its universal connectivity.

Linking Multiple Speakers

To expand your sound system, you can daisy-chain multiple active speakers. Connect an XLR cable from the 'LINE OUT' port of the SPA-12BAT to the 'LINE IN' (or equivalent) of another active speaker. This allows the audio signal from the primary speaker to be sent to additional speakers.

Illustration of linking multiple LyxPro speakers together using an XLR cable.

Image: A visual representation of how to connect two LyxPro speakers using an XLR cable, demonstrating the daisy-chaining capability for expanded audio coverage.

Přenosnost

The LyxPro SPA-12BAT is designed for easy transport. It features a foldable carry handle and integrated wheels, allowing you to effortlessly move the speaker to your desired location.

LyxPro SPA-12BAT speaker showing its integrated wheels and retractable carry handle for easy transport.

Image: The LyxPro SPA-12BAT speaker highlighting its design features for portability, including robust integrated wheels and a convenient retractable handle for easy transportation.

Údržba

  • Čištění: Wipe the exterior of the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Skladování: When not in use for extended periods, store the speaker in a cool, dry place. It is recommended to fully charge the battery every few months to maintain its health.
  • Péče o baterie: Avoid completely draining the battery frequently. Recharge promptly after use.

Odstraňování problémů

ProblémMožná příčinaŘešení
Žádná sílaPower cable not connected; Battery drained; Power switch off.Ensure power cable is securely connected and plugged in. Charge the battery. Turn the power switch to 'ON'.
Žádný zvukový výstupVolume too low; Incorrect input selected; Device not connected properly; Faulty cable.Increase master volume and individual input volumes. Press 'MODE' to select correct input. Check all cable connections. Test with a different cable.
Bluetooth se nepřipojujeSpeaker not in Bluetooth mode; Device too far; Interference; Already paired to another device.Ujistěte se, že je reproduktor v režimu Bluetooth. Přesuňte zařízení blíže k reproduktoru. Odpojte se od ostatních zařízení Bluetooth. Zkuste restartovat reproduktor i zařízení.
Mikrofon nefungujeMicrophone off; Battery low (wireless mics); Incorrect input volume; Mic/Line switch incorrect.Ensure microphone is powered on. Replace batteries in wireless mics. Increase mic volume knob. Set Mic/Line switch to 'Mic'.
Humming or static noiseZemnící smyčka; Rušení od jiné elektroniky; Vadný kabel.Try plugging the speaker into a different outlet. Move away from other electronic devices. Test with different cables.

Technické specifikace

LyxPro SPA-12BAT speaker with dimensions: 23 inches height, 14 inches width, 13.5 inches depth, and weight of 32.9 pounds.

Image: The LyxPro SPA-12BAT speaker displaying its physical dimensions and weight, indicating its compact yet robust design.

  • Typ reproduktoru: Aktivní PA reproduktor
  • Průměr basového reproduktoru: 12 palce
  • Maximální výstupní výkon reproduktoru: 70 wattů
  • Impedance: 4 Ohmy
  • Technologie připojení: Bluetooth, XLR, 1/4", RCA, 3.5mm
  • Zdroj napájení: Battery Powered (Rechargeable) / AC
  • Doba nabíjení baterie: Přibližně 4 hodin
  • Materiál: Plast
  • Barva: Černý
  • Hmotnost položky: 29.1 libry (13.2 kg)
  • Rozměry balení: 25.28 x 16.73 x 13.39 palce (64.2 x 42.5 x 34 cm)
  • Číslo modelu: SPA12BAT
  • UPC: 840102134698

Záruka a zákaznická podpora

LyxPro products are designed for reliability and performance. This product comes with a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official LyxPro webmísto.

For technical assistance, troubleshooting, or any questions regarding your LyxPro SPA-12BAT speaker system, please contact LyxPro customer support. Contact information can typically be found on the LyxPro webna webu nebo v obalu vašeho produktu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.