Cooler Master RC-351-KKN2

Cooler Master CMP 351 Cabinet User Manual

Model: RC-351-KKN2

1. Konec produktuview

The Cooler Master CMP 351 is a mid-tower computer cabinet designed for PC enthusiasts and builders. It features a robust construction and a design focused on efficient cooling and ease of access for component installation. This cabinet includes a pre-installed power supply (available in 350W, 400W, or 500W variants) located at the top.

Mezi klíčové vlastnosti patří:

  • Front panel with a grill design for enhanced airflow.
  • Stylish blue LED stripe integrated into the front panel.
  • Conveniently located front I/O panel for easy access to ports.
  • One pre-installed 120mm rear fan and side panel vents for effective cooling.
Přední view of the Cooler Master CMP 351 Cabinet

Obrázek 1.1: Přední strana view of the Cooler Master CMP 351 Cabinet, showcasing the grill design and front I/O panel.

2. Nastavení a instalace

This section provides general guidelines for installing components into your Cooler Master CMP 351 Cabinet. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed installation instructions.

2.1 Příprava kabinetu

  1. Place the cabinet on a stable, flat surface.
  2. Remove the side panel(s) by unscrewing the thumbscrews at the rear of the cabinet and sliding the panel backward.
Interiér view of the Cooler Master CMP 351 Cabinet

Obrázek 2.1: Interiér view of the Cooler Master CMP 351 Cabinet, showing the motherboard tray and drive bays.

2.2 Instalace napájecího zdroje

The CMP 351 cabinet comes with a pre-installed power supply unit (PSU) located at the top of the chassis. Ensure all power cables are routed correctly and connected to your components.

  • Connect the 24-pin ATX power connector to your motherboard.
  • Připojte 4pinový nebo 8pinový konektor napájení CPU k základní desce.
  • Connect SATA power cables to your storage drives (HDDs/SSDs) and optical drives.
  • Connect PCIe power cables to your graphics card, if required.

2.3 Instalace základní desky

  1. Nainstalujte kryt I/O dodaný se základní deskou do zadního otvoru skříně.
  2. Align the motherboard with the standoffs inside the cabinet. Ensure all standoffs match the screw holes on your motherboard.
  3. Zajistěte základní desku šrouby.
Zadní view of the Cooler Master CMP 351 Cabinet

Obrázek 2.2: Zadní view of the Cooler Master CMP 351 Cabinet, showing the I/O shield cutout and expansion slots.

2.4 Drive Installation (HDD/SSD/Optical)

  • Install 3.5-inch hard drives into the designated drive bays. Secure them with screws or tool-less mechanisms if available.
  • Install 2.5-inch SSDs into dedicated SSD mounts or use adapters for 3.5-inch bays.
  • Install 5.25-inch optical drives into the front bays, securing them from the side.
  • Connect SATA data cables from your motherboard to each drive.

2.5 Připojení předního I/O panelu

Connect the front panel cables to the corresponding headers on your motherboard. These typically include:

  • Vypínač: Pro zapnutí/vypnutí systému.
  • Resetovací spínač: For restarting the system.
  • LED napájení: Indicates system power status.
  • HDD LED: Indikuje aktivitu pevného disku.
  • USB 2.0/3.0: For front USB ports.
  • HD zvuk: For front headphone and microphone jacks.

Refer to your motherboard manual for the exact pin layout of these headers.

3. Návod k obsluze

Once all components are installed and connected, and the side panel is reattached, your system is ready for operation.

  1. Connect the power cord from the wall outlet to the power supply unit at the rear of the cabinet.
  2. Flip the power switch on the PSU to the 'ON' position (usually marked 'I').
  3. Press the power button on the front panel of the cabinet to start your computer. The blue LED stripe on the front panel will illuminate, and the power LED will indicate the system's status.
  4. To shut down the computer, use the operating system's shutdown procedure.
  5. In case of an unresponsive system, press and hold the power button for several seconds to force a shutdown, or press the reset button for a system restart.

The cabinet's grill design and pre-installed 120mm rear fan are designed to provide optimal airflow. Ensure that the side panel vents are not obstructed to maintain proper cooling performance.

4. Údržba

Regular maintenance helps ensure the longevity and optimal performance of your computer system.

  • Čištění prachu: Periodically clean dust from the exterior and interior of the cabinet. Use compressed air to clear dust from fan blades, heatsinks, and ventilation grilles. Ensure the system is powered off and unplugged before cleaning.
  • Větrání: Ensure that the cabinet's ventilation openings, especially the front grill and side panel vents, are free from obstructions to allow for proper airflow.
  • Správa kabelů: Periodically check internal cable routing to ensure it does not impede airflow or interfere with fan operation.

5. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

  • Systém se nezapne:
    • Ensure the power cord is securely connected to both the wall outlet and the PSU.
    • Verify the PSU's main power switch is in the 'ON' position.
    • Zkontrolujte, zda je kabel vypínače na předním panelu správně připojen ke konektoru základní desky.
    • Confirm the PSU is functioning by performing a paperclip test (refer to PSU manual for safety).
  • Žádný výstup na displej:
    • Ensure your monitor is connected to the correct video output port (graphics card or integrated graphics).
    • Ověřte, zda je grafická karta správně usazena ve slotu PCIe a zda jsou připojeny všechny potřebné napájecí kabely.
    • Check RAM modules are correctly seated.
  • Excessive noise from fans:
    • Inspect fans (CPU, GPU, case fans) for dust buildup and clean them.
    • Ujistěte se, že žádné kabely nebrání lopatkám ventilátoru.
    • If a fan is consistently loud or making grinding noises, it may need replacement.
  • Overheating issues:
    • Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
    • Clean dust from all heatsinks and fans.
    • Verify thermal paste application on CPU cooler.
    • Ensure cabinet vents are not blocked.

6. Technické specifikace

FunkceSpecifikace
ZnačkaCooler Master
Číslo modeluRC-351-KKN2
Typ pouzdraStřední věž
BarvaBlue (LED stripe) / Black (Chassis)
Materiál pouzdraTvrzené sklo
Typ montáže napájecího zdrojeTop Mount (PSU included: 350W, 400W, or 500W)
Způsob chlazeníVzduch
Fan Size (Pre-installed)120 Millimetres (Rear)
Number of Fans (Pre-installed)1
Total USB Ports (Front I/O)1 2.0 (USB XNUMX)
Hard Disk Form Factor Support3.5 palce
Hmotnost položky10.36 libry (přibližně 4.7 kg)
Číslo dílu výrobceRC-351-KKN2

7. Záruka a podpora

For warranty information and technical support regarding your Cooler Master CMP 351 Cabinet, please refer to the warranty card included with your product or visit the official Cooler Master webmísto.

You can also visit the Cooler Master Store for additional product information and support resources:

Obchod Cooler Master na Amazonu

© 2023 Cooler Master. Všechna práva vyhrazena.

Související dokumenty - RC-351-KKN2

Předview Uživatelská příručka k počítačové skříni Cooler Master N400 NSE-400-KKN2 Mid-Tower
Podrobný uživatelský manuál pro počítačovou skříň Cooler Master N400 NSE-400-KKN2 Mid-Tower s plně síťovaným předním panelem. Obsahuje instalační průvodce, specifikace a řešení problémů.
Předview Návod k sestavení počítačové skříně Cooler Master CMP 520 a informace o záruce
Detailed assembly instructions and warranty information for the Cooler Master CMP 520 computer case, covering installation of components, fan setup, and warranty terms.
Předview IMI HEIMEIER Multilux 4 – Set s hlavicí Halo: Technická specifikace a použití
Podrobný popis a technické údaje pro IMI HEIMEIER Multilux 4 – Set s hlavicí Halo, termostatický ventilový set pro 1-trubkové a 2-trubkové topné systémy. Zahrnuje konstrukci, použití, technické parametry a příslušenství.
Předview Patriot Lighting LED Flush Mount Installation Guide - LED-SM525DL, LED-SM75DL
Detailed installation instructions and safety information for Patriot Lighting's LED Flush Mount ceiling lights, models LED-SM525DL and LED-SM75DL. Includes preparation, wiring, mounting, and warranty details.
Předview Návod k instalaci počítačové skříně Cooler Master CMP 520L
Komplexní průvodce instalací komponent do počítačové skříně Cooler Master CMP 520L, který zahrnuje montáž hardwaru, instalaci disků a montáž ventilátorů.
Předview Instalační příručka a specifikace chladicí jednotky Cooler Master MASTERBOX NR200P
Komplexní instalační průvodce a technické specifikace pro počítačovou skříň Cooler Master MASTERBOX NR200P. Obsahuje podrobný seznam dílů, podrobné pokyny k montáži, podrobnosti o vstupech/výstupech na předním panelu, kompatibilitu komponent a informace o záruce.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.