Uživatelská příručka k kombinovanému modulu Azurewave AW-NB100H WLAN 802.11n/b/g + Bluetooth 3.0HS a 4.0

1. Úvod

The Azurewave AW-NB100H is a highly integrated wireless local area network (WLAN) and Bluetooth combo module designed for embedded applications. This half-size mini card module provides IEEE 802.11 b/g/n Wi-Fi connectivity and Bluetooth 3.0HS & 4.0 capabilities, enabling high-speed wireless communication and digital content access without additional cables.

This manual provides essential information for the proper installation, operation, and maintenance of your AW-NB100H module. Please read it thoroughly before use.

2. Vlastnosti produktu

• Compliant with IEEE 802.11 b/g/n wireless standards.
• Supports 1 (Transmit) x 1 (Receive) technology for WLAN and Bluetooth.
• WLAN RX diversity for improved signal reception.
• High-speed wireless connection up to 150 Mbps.
• Nízká spotřeba energie a vysoce výkonný design.
• Fully qualified Bluetooth 4.0 & 3.0HS.
• Enhanced Data Rate (EDR) compliant for both 2Mbps and 3Mbps supported.
• Plnorychlostní provoz s podporou Piconet a Scatternet.
• Utilizes Atheros AR1111 with AR1005 solution.

3. Nastavení a instalace

The AW-NB100H is an internal component designed for integration into compatible devices such as laptops, smart TVs, or tablets. Installation typically involves opening the device chassis and connecting the module to a PCI Express Mini Card slot. Due to the technical nature of this installation, it is recommended that installation be performed by a qualified technician.

3.1 General Installation Steps (Consult Device Manual for Specifics):

1. Vypnout: Ujistěte se, že hostitelské zařízení je zcela vypnuté a odpojené od všech zdrojů napájení.
2. Přístup k vnitřním komponentám: Carefully open the host device's chassis to access the internal PCI Express Mini Card slot. Refer to your device's service manual for specific instructions.
3. Vložit modul: Align the AW-NB100H module with the PCI Express Mini Card slot. Gently push the module into the slot until it is fully seated.
4. Zabezpečený modul: Secure the module with the appropriate screws or clips provided by the host device manufacturer.
5. Připojení antén: Connect the appropriate WLAN and Bluetooth antennas to the module's connectors. Ensure a secure connection.
6. Zavřít podvozek: Carefully reassemble the host device's chassis.
7. Nainstalujte ovladače: After powering on the device, install the necessary drivers for the Atheros AR1111 (WLAN) and AR1005 (Bluetooth) components. Drivers are typically provided by the device manufacturer or can be downloaded from the Azurewave support webmísto.

Image 1: The Azurewave AW-NB100H module, showing its compact form factor and connectors. The label displays model number AW-NB100H, IEEE 802.11 b/g/n - BT Combo PCIe minicard, and various regulatory compliance markings.

4. Návod k obsluze

4.1 WLAN (Wi-Fi) Operation:

1. Ensure the necessary WLAN drivers are installed on your operating system.
2. Access your operating system's network settings.
3. Vyhledejte dostupné sítě Wi-Fi.
4. Vyberte požadovanou síť a v případě potřeby zadejte heslo.
5. Once connected, you can access the internet and local network resources.

4.2 Bluetooth Operation:

1. Ensure the necessary Bluetooth drivers are installed.
2. Enable Bluetooth in your operating system's settings.
3. Přepněte zařízení Bluetooth (např. sluchátka, myš) do režimu párování.
4. On your host device, search for new Bluetooth devices.
5. Vyberte zařízení ze seznamu a dokončete párování podle pokynů na obrazovce.

5. Údržba

The AW-NB100H module requires minimal maintenance. As an internal component, it is generally protected from environmental factors. However, consider the following:

• Aktualizace ovladačů: Regularly check for updated WLAN and Bluetooth drivers from your device manufacturer or Azurewave's support webwebu, aby byl zajištěn optimální výkon a kompatibilita.
• Čistota: If the host device's chassis is opened for other maintenance, ensure the area around the module is free from dust and debris. Use compressed air if necessary, but avoid direct contact with components.
• Fyzická kontrola: Periodically inspect antenna connections to ensure they are secure.

6. Řešení problémů

6.1 Běžné problémy a jejich řešení:

• No Wi-Fi or Bluetooth Connection:
  • Verify that the module is correctly installed and seated in its slot.
  • Ensure antenna cables are securely connected.
  • Check if WLAN and Bluetooth are enabled in your operating system settings.
  • Reinstall or update the device drivers.
  • Restartujte hostitelské zařízení.
• Pomalá rychlost Wi-Fi:
  • Ujistěte se, že jste v dosahu vašeho Wi-Fi routeru.
  • Zkontrolujte, zda nedochází k rušení jinými elektronickými zařízeními.
  • Aktualizujte ovladače Wi-Fi.
  • Verify your router settings and firmware are up to date.
• Zařízení Bluetooth se nespáruje:
  • Ujistěte se, že je zařízení Bluetooth v režimu párování.
  • Zkontrolujte, zda je na hostitelském zařízení povoleno rozhraní Bluetooth.
  • Move the Bluetooth device closer to the host device.
  • Remove previous pairings of the device from your host system and try again.
  • Aktualizujte ovladače Bluetooth.

If issues persist after attempting these solutions, consult the support resources for your host device or contact Azurewave technical support.

7. Specifikace

8. Informace o předpisech

The AW-NB100H module complies with various international regulatory standards. Key compliance markings and identifiers include:

• Model: AR5B225
• ID FCC: PPD-AR5B225
• IC: 4104A-AR5B225
• ID CMIIT: 2011DJ0462
• Mexiko: RCPATAR11-0210
• CCAI: CCAI11LP0300T2
• RoHS: Vyhovující
• Egypt: W-CWC-18
• Indie: ETA: 1063/2011/WRLO (Pb)
• Jordán: TRC/SS/2011/28
• KCC-CRM: ATH-AR5B225 (해당 무선설비는 운용 중 전파혼신 가능성이 있음 - This wireless equipment may cause radio interference during operation.)
• IDA Standards: Vyhovuje standardům IDA DA 104328
• Značka CE: Označuje shodu s normami ochrany zdraví, bezpečnosti a životního prostředí u výrobků prodávaných v Evropském hospodářském prostoru (EHP).

Provoz je podmíněn tím, že toto zařízení nezpůsobuje škodlivé rušení.

9. Podpora a záruka

For technical support, driver downloads, or warranty information, please refer to the documentation provided by the manufacturer of your host device or visit the official Azurewave support website. Warranty terms and conditions are typically provided at the point of purchase or by the device manufacturer integrating this module.