Uživatelská příručka k detektoru pohybu CHACON 34310

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your CHACON Motion Detector, model 34310. This device is designed to automatically switch lighting on and off based on detected movement, contributing to energy savings and convenience in indoor environments. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Bezpečnostní pokyny

Vždy dodržujte následující bezpečnostní pokyny, abyste předešli zranění nebo poškození zařízení:

• Instalaci musí provést kvalifikovaný elektrikář nebo kompetentní osoba v souladu s místními elektrotechnickými předpisy a předpisy.
• Disconnect the main power supply before commencing any installation, wiring, or maintenance work.
• Do not exceed the maximum load capacity of 500 watts for incandescent lamps.
• Ensure the device is connected to a 230V ~ 50Hz power supply.
• Nepokoušejte se zařízení rozebírat ani upravovat. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Udržujte zařízení mimo dosah vody, vlhkosti a extrémních teplot.

3. Konec produktuview

The CHACON 34310 Motion Detector integrates a Passive Infrared (PIR) sensor to detect movement within its coverage area. It features a simple interface for mode selection.

This image displays the front panel of the CHACON 34310 Motion Detector. It features a white rectangular housing with a translucent, ribbed PIR sensor window at the top. Below the sensor, there is a small white switch with 'ON', 'AUTO', and 'OFF' labels, indicating the operating modes. The overall design is simple and functional, suitable for indoor wall mounting.

Klíčové komponenty:

• PIR Sensor Window: Detects infrared radiation emitted by moving objects.
• Přepínač režimu: Allows selection between ON, AUTO, and OFF modes.
• Adjustment Dials (Internal/Concealed): Used to set time delay and light sensitivity. These are typically accessed during installation or setup.

4. Nastavení a instalace

Careful planning and execution are essential for optimal performance.

4.1 Předinstalační aspekty

• Napájení: Ensure a stable 230V ~ 50Hz power source is available at the installation location.
• Kompatibilita zatížení: The detector supports a maximum load of 500 watts for incandescent lamps. Verify your lighting fixture's wattage.
• Typ montáže: Designed for indoor mounting.

4.2 Pokyny pro umístění

Proper placement is critical for effective motion detection and to avoid false triggers.

• Oblast pokrytí: The detector has a 120° detection angle and a maximum range of 8 meters. Position it to cover the desired area effectively.
• Vyhněte se překážkám: Ensure the sensor has a clear line of sight to the area it monitors. Walls, furniture, or large objects can block detection.
• Minimize False Triggers:
  • Do not install near heat sources such as heating vents, radiators, or direct sunlight, as these can cause false activations.
  • Avoid aiming the sensor directly at windows where moving vehicles or pedestrians outside could trigger it.
  • Keep away from areas with strong air currents (e.g., near fans or air conditioning units) that might cause temperature fluctuations.

4.3 Pokyny pro zapojení

VAROVÁNÍ: Před zahájením zapojení se ujistěte, že je hlavní jistič odpojen od napájení.

1. Carefully open the detector housing to access the wiring terminals.
2. Connect the Live (L) wire from the power supply to the Live input terminal on the detector.
3. Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the detector.
4. Connect the Switched Live (L') output terminal of the detector to the Live input of your lighting fixture.
5. Connect the Neutral wire from the lighting fixture to the Neutral wire of the main power supply (or to the Neutral terminal on the detector if provided for load).
6. Secure all connections firmly and ensure no bare wires are exposed.
7. Close the detector housing and mount it securely in the chosen location.

5. Návod k obsluze

Once installed, the CHACON 34310 Motion Detector can be configured and operated using its mode selector switch and internal adjustment dials.

5.1 Mode Selector Switch

The front-facing switch allows you to select the operating mode:

• NA: The connected light will remain continuously on, regardless of motion detection or ambient light levels.
• AUTO: The detector will operate in automatic mode. The light will turn on when motion is detected and ambient light conditions meet the set sensitivity, and will turn off after the set time delay.
• OFF: The connected light will remain continuously off, regardless of motion detection.

5.2 Adjustment Dials (Time and Light Sensitivity)

These dials are typically located behind the front cover or on the side of the unit and are used to fine-tune the detector's behavior. Adjust them using a small screwdriver if necessary.

• Time Delay (Durable): This dial controls how long the light remains on after the last detected motion. It is adjustable from approximately 10 seconds to 4 minutes. Turn clockwise to increase the duration, counter-clockwise to decrease.
• Light Sensitivity (Candle Power Command): This dial determines the ambient light level at which the detector will become active. It can be adjusted from full darkness (light will activate even in bright conditions) to daylight (light will only activate in low light conditions). Turn clockwise for higher sensitivity (activates in brighter conditions), counter-clockwise for lower sensitivity (activates only in darker conditions).

6. Údržba

The CHACON 34310 Motion Detector requires minimal maintenance.

• Čištění: Periodically wipe the sensor window and housing with a soft, dry cloth to remove dust and dirt. Do not use abrasive cleaners, solvents, or excessive moisture.
• Inspekce: Occasionally check for any visible damage to the housing or wiring. If damage is found, disconnect power and consult a qualified electrician.
• Žádné díly opravitelné uživatelem: Do not attempt to open the unit for internal cleaning or repair.

7. Řešení problémů

If you experience issues with your motion detector, refer to the following common problems and solutions:

If these troubleshooting steps do not resolve the issue, contact a qualified electrician or the product retailer for further assistance.

8. Specifikace

9. Záruka a podpora

For information regarding the product warranty, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical support or further assistance, please contact the CHACON customer service or your product retailer.