JETBeam SE-A01

Niteye SE-A01 AAA Flashlight User Manual

Model: SE-A01 | Manufacturer: Niteye

Zavedení

The Niteye SE-A01 is a compact and powerful AAA flashlight designed for everyday carry and general utility. Despite its small size, it delivers significant illumination and features a user-friendly interface. This manual provides comprehensive instructions for its setup, operation, maintenance, and troubleshooting, ensuring you get the most out of your device.

Niteye SE-A01 AAA Flashlight, main view

Image: The Niteye SE-A01 AAA Flashlight, showcasindíky kompaktnímu designu a integrované kapesní sponě.

Obsah balení

  • 1 x SE-A01 Flashlight with Click Switch
  • Náhradní O-kroužky
  • Uživatelská příručka
  • Záruční list
  • Quality Inspection Card

Nastavení

Instalace baterie

The Niteye SE-A01 operates on a single AAA battery. Ensure correct polarity during installation to prevent damage to the device.

  1. Odšroubujte zadní krytku svítilny otáčením proti směru hodinových ručiček.
  2. Insert one AAA battery with the positive (+) end facing towards the head of the flashlight.
  3. Zašroubujte zadní víčko zpět ve směru hodinových ručiček, dokud nebude bezpečně utaženo.
Niteye SE-A01 AAA Flashlight tail cap

Obrázek: Zadní view of the Niteye SE-A01, highlighting the tail cap and click switch for battery access and operation.

Návod k obsluze

Zapnutí/vypnutí

To turn the flashlight on or off, fully press the tail switch until you hear a distinct click.

Výběr režimu

The SE-A01 features three distinct light levels: High, Mid, and Low. To cycle through these modes:

  1. With the flashlight turned on, gently half-press the tail switch (without clicking) to advance to the next mode.
  2. Repeat half-presses to cycle through the sequence: High → Mid → Low.

The flashlight is equipped with a memory function that automatically recalls the last used mode when the device is turned off and then back on.

Niteye SE-A01 AAA Flashlight front view

Obrázek: Přední strana view of the Niteye SE-A01, showing the TIR lens and XP-G LED, which provide efficient light output.

Údržba

Čištění

Regularly clean the flashlight's body with a soft, slightly damp cloth. For the lens, use a specialized lens cleaning cloth to avoid scratches. Do not use abrasive cleaners or harsh chemicals.

Mazání O-kroužků

To maintain the flashlight's water resistance, periodically lubricate the O-rings with silicone grease. Replace any worn or damaged O-rings with the provided spares to ensure a proper seal.

Péče o baterie

If the flashlight will not be used for an extended period, it is recommended to remove the battery. This prevents potential battery leakage and subsequent damage to the internal components of the device.

Odstraňování problémů

ProblémMožná příčinaŘešení
Svítilna se nezapne.Battery is dead or incorrectly inserted; tail cap is loose.Replace battery or check polarity. Ensure tail cap is fully tightened.
Světlo bliká nebo je tlumené.Low battery; loose tail cap; dirty contacts.Replace battery. Tighten tail cap. Clean battery contacts and threads with a clean cloth.
Nelze změnit režimy.Zadní spínač není správně stisknutý do poloviny.Ensure a gentle, partial press of the tail switch without a full click to cycle modes.

Specifikace

FunkceDetail
ModelSE-A01
Světelný zdrojXP-G LED
Maximální výkon130 XNUMX lumenů
Vzdálenost paprsku40 metrů
Max. Doba chodu20 hodin (nízký režim)
RežimyHigh, Mid, Low
Zdroj napájení1 x AAA baterie
MateriálHliník
Rozměry8.13 x 1.4 x 1.3 cm
Hmotnost18.14 g (bez baterie)
BarvaČerný
Niteye SE-A01 AAA Flashlight with model engraving

Obrázek: Boční view of the Niteye SE-A01, showing the "SE-A01" model engraving and the durable aluminum body.

Záruka a podpora

The Niteye SE-A01 includes a Warranty Card in its package. Please refer to the terms and conditions specified on the card for details regarding warranty coverage and duration. It is recommended to retain your purchase receipt along with the warranty card for any future claims.

For technical support, service inquiries, or issues not explicitly covered in this manual, please contact the manufacturer or your authorized point of purchase. Provide your product model number and a detailed description of the issue for efficient assistance.

Niteye SE-A01 AAA Flashlight upright with clip

Image: The Niteye SE-A01 standing upright, showcasing its integrated pocket clip for secure carrying and easy access.

© 2024 Niteye. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.