1. Úvod
This manual provides comprehensive instructions for the safe and efficient use of the Bpt AS/200 230V Power Supply, model 61404100. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage.
2. Bezpečnostní informace
VAROVÁNÍ: Electrical shock hazard. Always disconnect power before installing or servicing this unit.
- Ujistěte se, že je zdroj napájení připojen k uzemněné zásuvce.
- Neotevírejte napájecí zdroj casing; uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
- Chraňte jednotku před vodou, vlhkostí a extrémními teplotami.
- Only use the power supply with compatible devices as specified.
- Pokud si nejste jisti, měl by instalaci provést kvalifikovaný personál.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Bpt AS/200 230V Power Supply (Model: 61404100)
- Uživatelská příručka (tento dokument)
Figure 1: Bpt AS/200 230V Power Supply. This image shows the compact, rectangular power supply unit, typically black or grey, with various connectors visible on one side.
4. Nastavení a instalace
Follow these steps to properly install your Bpt AS/200 Power Supply:
- Připravte instalační prostor: Ensure the device where the power supply will be installed (e.g., computer case, audio/video equipment) is powered off and disconnected from the main power outlet.
- Montáž napájecího zdroje: Carefully place the Bpt AS/200 into its designated slot within the compatible device. Secure it using appropriate screws (not included, typically provided with the device chassis).
- Připojení napájecích kabelů:
- Connect the 24-pin system bus connector to the motherboard or main control board of your device. Ensure it is firmly seated.
- Connect any other necessary peripheral power connectors (e.g., SATA, Molex, PCIe, if applicable to your specific setup and device) from the power supply to the respective components.
- Připojení vstupního napájení: Connect the main power cable (not included) to the power supply's input port. Ensure the power cable is rated for 230-240V AC.
- Závěrečná kontrola: Dvakrát zkontrolujte všechna připojení, abyste se ujistili, že jsou bezpečná a správně orientovaná.
Kompatibilní zařízení: This power supply is designed for "Altri dispositivi audio e video" (Other audio and video devices) and systems requiring an ATX type connectivity with a 24-pin bus connector.
5. Návod k obsluze
Once the Bpt AS/200 Power Supply is correctly installed and all connections are secure:
- Připojení k elektrické síti: Plug the main power cable into a suitable 230V AC wall outlet.
- Zapnutí zařízení: Turn on the main power switch of the device (e.g., computer, audio/video system) that the power supply is powering. The power supply will then provide the necessary voltage to the internal components.
- Vypínací zařízení: To turn off, follow the standard shutdown procedure for your device, then disconnect from the mains power if the device will not be used for an extended period.
6. Údržba
The Bpt AS/200 Power Supply is designed for reliable operation with minimal maintenance. Its cooling method is "Aria" (Air).
- Čištění: Periodically, ensure that the ventilation openings of the power supply and the device it powers are free from dust and debris to maintain optimal airflow. Use compressed air or a soft brush for cleaning.
- Prostředí: Operate the power supply in a well-ventilated area, free from excessive dust, humidity, and direct sunlight.
- Inspekce: Occasionally inspect power cables for any signs of damage or wear. Replace damaged cables immediately.
7. Řešení problémů
If you encounter issues with your Bpt AS/200 Power Supply, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapne. | No power from wall outlet, loose power cable, faulty power supply. | Check wall outlet with another device. Ensure all power cables are securely connected. If problem persists, the power supply may be faulty and require replacement. |
| Přerušované napájení. | Loose internal connections, overheating. | Verify all internal power connectors are firmly seated. Ensure adequate ventilation to prevent overheating. |
| Unusual noises from the power supply. | Zablokování nebo selhání ventilátoru. | Disconnect power and inspect for any obstructions in the fan area. If the noise persists or is accompanied by overheating, discontinue use and seek professional assistance. |
Pokud kroky pro řešení potíží problém nevyřeší, kontaktujte zákaznickou podporu nebo kvalifikovaného technika.
8. Specifikace
| Značka | Bpt |
| Název / číslo modelu | AS/200 (61404100) |
| Vstupní objemtage (Minimum) | 230 voltů (střídavého proudu) |
| Vstupní objemtage (Maximum) | 240 voltů (střídavého proudu) |
| Způsob chlazení | Vzduch |
| Rozměry položky (DxŠxV) | 10 x 5 x 10 cm |
| Device Connectivity Type | ATX |
| System Bus Connector Type | 24 pin |
| Kompatibilní zařízení | Other audio and video devices |
| GTIN | 08004487064816 |
| Země původu | Itálie |
9. Informace o záruce
According to product specifications, a product warranty is "Non applicabile" (Not applicable). Please refer to your point of purchase for any return or exchange policies.
10. Podpora
For technical assistance or further inquiries regarding the Bpt AS/200 230V Power Supply, please contact your retailer or the manufacturer, Bpt S.P.A., directly. Ensure you have your product model number (61404100) available when seeking support.