1. Důležité bezpečnostní informace
Please read and understand all instructions and safety warnings before installing or operating this appliance. Failure to follow these instructions may result in property damage, personal injury, or death.
- Tento spotřebič je určen pro pouze pro vnitřní použití.
- Installation must be performed in a masonry or agency-approved firebox.
- A minimum firebox size of 20 inches (H) x 29 inches (W) in front (22 inches W at rear) x 13 inches (D) is required.
- Integrovaný Oxygen Depletion Sensor (O.D.S.) automatically shuts off the unit if carbon monoxide levels are unsafe or oxygen levels are too low.
- Toto je a ventless appliance; no outside duct or chimney is needed for operation.
- Ensure proper ventilation as specified in the full installation guide to prevent oxygen depletion.
- Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození (varování podle návrhu 65).
2. Konec produktuview
The Duluth Forge DLS-18R-2 is an 18-inch dual fuel ventless fireplace log set designed to provide efficient heating and a realistic flame appearance. It operates on either natural gas or liquid propane and features a convenient remote control for temperature management.
Image 2.1: The Duluth Forge DLS-18R-2 18-inch Dual Fuel Ventless Fireplace Logs Set, showcasing the realistic stacked red oak logs and active flames.
Klíčové vlastnosti:
- Dual Fuel Technology: Operates with Natural Gas or Liquid Propane.
- Tepelný výkon: 30,000 BTU, capable of heating up to 1,100 sq. ft.
- Realistický design: Features 7 hand-painted, detailed logs made from superior refractory ceramics, cast from real wood.
- U-Burner Chassis: Provides two rows of flames for a more realistic fire effect.
- Dálkové ovládání: Thermostatic remote control allows setting desired temperature and controlling on/off functions.
- Vysoká účinnost: 99.9% efficient, providing economical heating.
- Bezpečnost: Equipped with a Safety Pilot O.D.S. (Oxygen Depletion Sensor) and Battery Assisted Piezo ignition.
3. Nastavení a instalace
Installation of the Duluth Forge DLS-18R-2 log set requires careful attention to detail and adherence to all local codes and regulations. It is recommended that installation be performed by a qualified professional.
3.1 Vybalení a kontrola
- The product ships in two boxes. Carefully unpack all components and inspect for any shipping damage.
- Verify all parts are present according to the packing list. Contact customer support immediately if any parts are missing or damaged.
3.2 Firebox Requirements
Ensure your firebox meets the minimum dimensions:
- Výška: 20 palců
- Width (front): 29 palců
- Width (rear): 22 palců
- Hloubka: 13 palců
Image 3.1: Dimensional diagram of the log set, indicating height, length, and depth, along with minimum firebox size requirements.
3.3 Připojení plynu
- This unit is designed for use with either Natural Gas or Liquid Propane. Ensure the correct fuel type is used and the appliance is properly converted if necessary (refer to the detailed installation manual for conversion instructions).
- All gas connections must be leak-tested before operation.
3.4 Umístění klád
Carefully place the hand-painted ceramic logs onto the burner chassis according to the specific log placement diagram provided in the full installation manual. Incorrect log placement can affect flame appearance and safety.
Obrázek 3.2: Detailní záběr view of the stacked red oak logs, highlighting their realistic texture and charring details.
4. Návod k obsluze
This section outlines the basic steps for operating your Duluth Forge DLS-18R-2 fireplace log set.
4.1 Initial Startup and Piezo Ignition
- Ensure the gas supply to the unit is open.
- Press and hold the control knob while rotating it to the PILOT position.
- Press the Piezo igniter button repeatedly until the pilot flame ignites. Hold the control knob for 20-30 seconds after ignition to allow the thermocouple to heat up.
- Release the control knob. If the pilot light extinguishes, repeat steps 2-3.
- Once the pilot is lit, rotate the control knob to the ON position to ignite the main burner.
4.2 Obsluha dálkového ovladače
The included thermostatic remote control allows for convenient operation of your log set.
Image 4.1: The remote control for the Duluth Forge DLS-18R-2, featuring an LCD display and buttons for power and temperature adjustment.
- The remote control requires 4 AA batteries and the receiver unit requires 2 AAA batteries (all included). The Piezo ignition requires 1 AAA battery (included).
- The LCD screen displays the current room temperature (in °F or °C), burner on/off indication, and thermostat or manual mode indication.
- Use the ON/OFF buttons to turn the main burner on or off.
- In Thermostat Mode, set your desired temperature. The unit will cycle on and off to maintain this temperature.
- Refer to the separate remote control manual for detailed programming and troubleshooting.
5. Údržba
Regular maintenance ensures the safe and efficient operation of your fireplace log set.
- Roční kontrola: It is recommended to have the appliance inspected annually by a qualified service technician.
- Čištění: Keep the burner and pilot assembly free of dust and debris. Use a soft brush or vacuum cleaner to gently clean the logs and burner area when the unit is cool.
- Log Condition: Periodically inspect the ceramic logs for cracks or damage. Replace any damaged logs to maintain proper flame patterns and safety.
- Výměna baterie: Replace batteries in the remote control and receiver unit as needed to ensure reliable operation.
6. Řešení problémů
If you experience issues with your Duluth Forge DLS-18R-2 log set, consult the following basic troubleshooting guide. For complex issues, contact a qualified service technician.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Pilot light will not stay lit | Thermocouple not heating sufficiently; Gas supply issue; Pilot orifice clogged. | Hold control knob longer after ignition; Check gas supply valve; Clean pilot assembly. |
| Main burner does not ignite | Pilot light not lit; Control knob not in ON position; Gas supply issue. | Ensure pilot is lit; Rotate control knob to ON; Check gas supply. |
| Dálkové ovládání nefunguje | Dead batteries; Receiver unit not powered; Interference. | Replace batteries in remote and receiver; Check receiver power; Reposition receiver. |
| Jednotka se neočekávaně vypne | Oxygen Depletion Sensor (O.D.S.) activated; Pilot light extinguished. | Ensure adequate ventilation; Relight pilot. If O.D.S. repeatedly activates, seek professional inspection. |
7. Specifikace
- Model: DLS-18R-2
- Značka: Duluth Forge
- Rozměry produktu: 13"D x 20"W x 29"H (Overall unit, approximate)
- Log Size: 18 palce
- Tepelný výkon: 10 000 britských tepelných jednotek (BTU)
- Pokrytí topení: Až 1,100 čtverečních stop
- Typ paliva: Dual Fuel (Natural Gas or Liquid Propane)
- Typ zapalování: Battery Assisted Piezo
- Speciální vlastnosti: Oxygen Depletion Sensor (O.D.S.), Thermostatic Remote Control
- Materiál: Red Oak (ceramic logs), Powder-coated steel chassis
- Zahrnuté komponenty: Gas Burner, Hand-Painted Logs, Remote Control, Oxygen Depletion Sensor, Hardware Pack, Batteries (4 AA, 3 AAA)
- Hmotnost položky: 13.95 libry
- UPC: 815192020282
- Výrobce: Tovární nákupy přímo
8. Záruka a podpora
8.1 Informace o záruce
This Duluth Forge product comes with a Omezená záruka. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
8.2 Zákaznická podpora
For technical assistance, replacement parts, or warranty inquiries, please contact the manufacturer, Factory Buys Direct. Contact information can typically be found in the product packaging or on the Duluth Forge official website. When contacting support, please have your model number (DLS-18R-2) and proof of purchase readily available.