1. Úvod
This manual provides essential information for the safe and efficient operation of your Magicard Enduro 3e Duo Dual-Sided ID Card Printer. The Enduro 3e Duo is designed for reliable, high-quality dual-sided printing of plastic ID cards using dye-sublimation technology. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Bezpečnostní informace
Observe the following safety precautions to prevent damage to the printer or injury to yourself.
- Tiskárnu vždy připojujte k uzemněné elektrické zásuvce.
- Nevystavujte tiskárnu vodě ani nadměrné vlhkosti.
- Zajistěte řádné větrání kolem tiskárny.
- Use only Magicard approved ribbons and cleaning supplies.
- Během provozu držte ruce mimo pohyblivé části.
- Před čištěním nebo opravou odpojte napájení.
3. Obsah balení
Verify that all items are present in the package. If any items are missing or damaged, contact your supplier.
- Magicard Enduro 3e Duo ID Card Printer
- Power Supply Unit and Cable
- USB kabel
- Printer Driver CD (or download instructions)
- Rychlý průvodce
- Cleaning Kit (may vary by package)
- Sample ID Cards (may vary by package)
- Color Ribbon (may vary by package)
Obrázek 3.1: Magicard Enduro 3e Duo printer and typical package contents. This image shows the printer unit, a color ribbon, blank cards, and software media.
4. Nastavení
4.1 Vybalení a umístění
- Opatrně vyjměte tiskárnu z obalu.
- Place the printer on a stable, flat surface with adequate space for card input and output.
- Zajistěte řádné větrání kolem jednotky.
4.2 Připojení napájení
- Připojte napájecí zdroj ke vstupnímu portu tiskárny.
- Zapojte napájecí kabel do uzemněné elektrické zásuvky.
- Do not power on the printer yet.
4.3 Connecting to a Computer (Ethernet)
The Magicard Enduro 3e Duo supports Ethernet connectivity.
- Připojte ethernetový kabel z ethernetového portu tiskárny k síťovému routeru nebo přepínači.
- Ensure your computer is on the same network.
Note: A USB connection is also available for direct connection to a computer.
4.4 Instalace ovladače
- Insert the driver CD into your computer's CD/DVD drive, or download the latest drivers from the official Magicard webmísto.
- Postupujte podle pokynů na obrazovce a nainstalujte ovladače tiskárny.
- Once drivers are installed, power on the printer. Your computer should detect the new hardware.
Obrázek 4.1: Magicard Enduro 3e Duo printer with card input and output areas visible.
5. Návod k obsluze
5.1 Loading the Color Ribbon
- Otevřete horní kryt tiskárny.
- Carefully insert the Magicard color ribbon into its designated slot, ensuring it is correctly aligned with the ribbon guides.
- Close the top cover securely. The printer will automatically calibrate the ribbon.
5.2 Loading ID Cards
- Ensure the card input hopper is empty.
- Place a stack of blank plastic ID cards into the input hopper, ensuring they are facing the correct direction (usually print-side down for the first pass). The printer supports up to 250 cards.
- Adjust the card guides to gently hold the stack in place.
5.3 Printing a Dual-Sided Card
- Open your ID card design software on your computer.
- Create or load your desired card design, ensuring both front and back designs are prepared.
- Go to the print settings and select the Magicard Enduro 3e Duo printer.
- Verify that dual-sided printing is enabled in the printer driver settings.
- Initiate the print job. The printer will automatically feed, print, and flip the card for dual-sided output.
- Collect the finished card from the output stacker.
6. Údržba
Regular maintenance ensures optimal print quality and extends the life of your printer.
6.1 Čištění tiskárny
It is recommended to clean the printer after every ribbon change or approximately every 1,000 cards printed.
- Power off the printer and disconnect the power cable.
- Remove any cards from the input hopper and the ribbon.
- Use a Magicard cleaning card (typically included in cleaning kits) by following the instructions provided with the cleaning card.
- For external cleaning, use a soft, lint-free cloth dampened with isopropyl alcohol. Do not use abrasive cleaners.
6.2 Výměna pásky
Replace the ribbon when the printer indicates it is empty or when print quality degrades. Refer to section 5.1 for loading instructions.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Tiskárna nereaguje | Power cable disconnected, printer off, driver issue, network issue. | Check power connection, ensure printer is on, reinstall drivers, verify network connection. |
| Špatná kvalita tisku | Dirty print head, old ribbon, incorrect card type, driver settings. | Clean the printer, replace ribbon, use recommended cards, check driver settings. |
| Zaseknutí karty | Misaligned cards, damaged cards, foreign object. | Power off, carefully remove jammed card, ensure cards are flat and correctly loaded. |
| Chyba pásu karet | Ribbon incorrectly installed, ribbon broken, end of ribbon. | Reinstall ribbon correctly, replace ribbon if broken or empty. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Model | Enduro 3e Duo (3633-3021) |
| Technologie tisku | Dye Sublimation / Thermal Transfer |
| Print Capability | Oboustranný |
| Rozlišení tisku | 300 dpi (Color and Black & White) |
| Rychlost tisku (barevně) | Up to 100 cards/hour |
| Rychlost tisku (černobíle) | Up to 500 cards/hour |
| Card Input Capacity | 250 XNUMX karet |
| Konektivita | Ethernet, USB |
| Maximální velikost média | 4x6 inches (standard CR80 ID cards) |
| Hmotnost položky | Přibližně 12.13 libry |
| Rozměry (balení) | 23.8 x 11.8 x 10.2 palce |
| Barevná hloubka | 24 bpp |
9. Informace o záruce
The Magicard Enduro 3e Duo ID Card Printer typically comes with a 2letá omezená záruka. This warranty covers defects in materials and workmanship under normal use. Specific terms and conditions may vary by region and reseller. Please refer to the warranty card included with your product or visit the official Magicard webstránky s podrobnými informacemi o záruce a registrací.
10. Podpora
For technical assistance, driver downloads, or further product information, please visit the official Magicard support website. You can also contact your authorized Magicard reseller for local support.
- Online podpora: www.magicard.com/support (Napřampodkaz, skutečný odkaz se může lišit)
- Contact your reseller: Refer to your purchase documentation for reseller contact details.