BLITZU Cyborg 168T Rear Bike Light Instruction Manual

1. Úvod

Thank you for choosing the BLITZU Cyborg 168T Rear Bike Light. This USB rechargeable LED light is designed to enhance your visibility and safety during cycling, both day and night. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new bike light.

2. Bezpečnostní informace

• Před jízdou se vždy ujistěte, že je světlo bezpečně upevněno.
• Nedívejte se přímo do světelného paprsku, abyste předešli dočasnému zhoršení zraku.
• Keep the light clean and free from obstructions to maintain optimal visibility.
• While the light is water-resistant, avoid prolonged immersion in water.
• Regularly check the battery level and recharge as needed to prevent unexpected power loss.
• Adhere to all local traffic laws and regulations regarding bicycle lighting.

3. Co je v krabici

• BLITZU Cyborg 168T Rear Bike Light
• USB nabíjecí kabel
• Montážní popruh
• Návod k použití

4. Vlastnosti produktu

• Vysoká viditelnost: Emits 168 lumens with a 220° wide-angle beam, visible up to 0.7 miles, enhancing safety during both day and night.
• Odolná konstrukce: Vybaven hliníkovým casing for strength and longevity, designed to withstand various weather conditions.
• Snadná instalace: Mounts quickly without tools using a heavy-duty flexible rubber strap, compatible with seatposts, seatstays, helmets, saddle bags, backpacks, skateboards, scooters, strollers, wheelchairs, or dog collars.
• Více režimů osvětlení: Offers 6 distinct lighting modes to suit different riding conditions and preferences.
• USB dobíjecí: Conveniently recharges via USB, providing a runtime of up to 4 hours depending on the mode.
• Voděodolný: Rated IPX4 for water resistance, suitable for use in rain and other wet conditions.

Image: The BLITZU Cyborg 168T Rear Bike Light, showcasinjeho kompaktní design a jasně červené podsvícení.

Image: The BLITZU Cyborg 168T Rear Bike Light mounted on a bicycle, illuminated at night to demonstrate visibility.

Image: The BLITZU Cyborg 168T Rear Bike Light mounted on a helmet, showing its versatility in placement.

5. Nastavení a instalace

The BLITZU Cyborg 168T is designed for quick and easy installation without the need for any tools. Follow these steps to mount your light:

1. Identify the desired mounting location (e.g., seatpost, seatstay, helmet, backpack).
2. Attach the flexible rubber strap to the light's mounting bracket.
3. Wrap the strap around the chosen mounting point and secure it by hooking the strap into one of the notches. Adjust for a snug fit.
4. The light's hinge can be adjusted vertically or horizontally to focus the beam as needed.

Image: A diagram illustrating the simple, tool-free installation process using the flexible rubber strap.

6. Návod k obsluze

The BLITZU Cyborg 168T features a single button for easy control of its various lighting modes.

• Zapnutí/vypnutí: Press and hold the power button for approximately 2 seconds to turn the light on or off.
• Změnit režimy: Once the light is on, short press the power button to cycle through the 6 available lighting modes: Steady High, Steady Mid, Steady Low, High Flash, Low Flash, and Strobe.

Image: Visual representation of the 6 lighting modes and their approximate runtimes.

7. Pokyny pro nabíjení

The BLITZU Cyborg 168T is equipped with a rechargeable battery for convenience.

1. Locate the USB charging port on the side of the light, typically covered by a rubber flap for water resistance.
2. Jemně otevřete gumovou klapku.
3. Connect the provided USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
4. A small indicator light will illuminate during charging and turn off or change color when fully charged.
5. Once charging is complete, disconnect the cable and firmly close the rubber flap to maintain water resistance.

Image: The BLITZU Cyborg 168T light connected to a laptop for USB charging.

8. Údržba

• Čištění: Otřete světlo měkkým, damp hadříkem odstraňte nečistoty a usazeniny. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery periodically to maintain its health.
• Péče o baterie: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the indicator shows low battery.

9. Řešení problémů

• Světlo se nerozsvítí: Ujistěte se, že je baterie nabitá. Stiskněte a podržte tlačítko napájení po dobu 2 sekund pro aktivaci.
• Světlo se nenabíjí: Check the USB cable and power source connections. Ensure the charging port's rubber flap is fully open.
• Blikání nebo tlumení světla: The battery may be low. Recharge the light.
• Problémy s montáží: Ensure the rubber strap is correctly looped and secured into a notch for a tight fit.

10. Specifikace

11. Záruka a podpora

The BLITZU Cyborg 168T Rear Bike Light comes with a 1 rok záruka from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims or technical support, please contact BLITZU customer service through their official webnebo prodejce, u kterého byl produkt zakoupen. Uschovejte si prosím doklad o koupi pro ověření záruky.