Visionis FPC-5323 Access Control Kit and VIS-3002 Keypad User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Visionis FPC-5323 One Door Access Control Kit. This kit is designed for single-door access control in swinging door applications, utilizing a 300lbs magnetic lock and the VIS-3002 indoor keypad/reader with a mini controller. The system supports up to 1,000 users and offers multiple access methods including PIN codes, proximity cards, and keytags, ensuring enhanced security for your premises.

2. Komponenty produktu

The Visionis FPC-5323 kit includes the following components:

• (1) VIS-ML300LED: 300lbs Indoor Electric Magnetic Lock with LED Sensor.
• (1) VIS-ZL300: L and Z Bracket for 300lbs Electromagnetic Lock.
• (1) VIS-3002: Access Control Indoor Only Digital Touch Keypad + Reader Standalone with Mini Controller, Wiegand 26, No Software, EM Cards, 1000 Users.
• (1) VIS-MINI-CNTRL: 1 Door Controller for Access Control Systems with No Software. Supports up to 1,000 users.
• (1) VIS-7001: Indoor + Outdoor Weather, Waterproof Rated IP65 Stainless Steel Door Bell Type Round Request To Exit Button with LED Light, NC, COM, NO Outputs.
• (1) VIS-8006: External Hardwire Doorbell for Keypad/Reader Access Control.
• (1) VISCP200: 12V 2Amp Power Supply Transformer, UL Listed.
• (10) VS-VIS-APROXCARD/26: Access Control Proximity Contactless Smart Entry Card, 1.8mm thick, 26 bit, 125khz.
• (10) VS-VIS-KEYTAG: Access Control Proximity Contactless Smart Entry Keyfob, 26 bit, 125khz.

3. Nastavení a instalace

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended that installation be performed by a qualified technician. The FPC-5323 kit is designed for doors that open inwards.

3.1 Schéma zapojení nahořeview

Refer to the detailed wiring diagrams provided with your kit for specific connection instructions. The VIS-3002 keypad connects to the VIS-MINI-CNTRL mini controller, which then controls the magnetic lock and integrates with the exit button and doorbell.

3.2 Instalace magnetického zámku

Ensure the magnetic lock (VIS-ML300LED) and its armature plate are correctly aligned and make full contact when the door is closed. The L and Z brackets (VIS-ZL300) are essential for proper mounting on inswinging doors.

3.3 Keypad Mounting

Mount the VIS-3002 keypad at a convenient height near the door. Ensure all wiring connections are secure and protected from environmental factors.

3.4 Video Resource

4. Návod k obsluze

The VIS-3002 keypad offers multiple ways to gain access:

• PIN kód: Enter your assigned PIN code on the keypad.
• Proximity Card/Keytag: Present your EM card or keytag to the reader area on the keypad.
• Karta + PIN: For enhanced security, some configurations may require both a card/keytag presentation and a PIN code entry.
• NFC (Phone as Card): The keypad supports NFC functionality, allowing compatible phones with built-in NFC to act as a proximity card. This feature is not compatible with iOS devices.

4.1 Request to Exit Button (VIS-7001)

To exit the secured area, simply press the VIS-7001 Request to Exit button. This will momentarily release the magnetic lock, allowing the door to open.

4.2 External Doorbell (VIS-8006)

The VIS-8006 external doorbell provides an audible alert when activated from the keypad, allowing visitors to signal their presence.

5. Programming (Keypad)

The VIS-3002 keypad allows for programming of user PINs, proximity cards, and keytags. Refer to the specific programming instructions in the user manual included with the VIS-3002 keypad for detailed steps.

5.1 Vstup do režimu programování

Typically, you will need to enter a master code to access programming mode. For many Visionis keypads, this involves pressing * followed by the master code and then #.

5.2 Přidání uživatelů

Follow the keypad's specific menu options to add new user PINs or enroll new proximity cards/keytags. Each user will be assigned a unique identifier or PIN.

5.3 Smazání uživatelů

To remove access for a user, enter programming mode and follow the instructions to delete their specific PIN or card/keytag from the system's memory.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a spolehlivý provoz vašeho systému kontroly přístupu.

• Čištění: Wipe the keypad and other components with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Kontroly připojení: Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze nebo poškození.
• Zarovnání magnetického zámku: Ensure the magnetic lock and armature plate remain properly aligned and make full contact. Any gaps can reduce holding force.
• Napájení: Verify the power supply (VISCP200) is functioning correctly and providing stable 12V power to the system.

7. Řešení problémů

If you encounter issues with your Visionis access control system, refer to the following common troubleshooting steps:

• Door Not Locking/Unlocking:
  • Check power supply to all components.
  • Ensure the magnetic lock and armature plate are in full contact. Adjust if necessary.
  • Verify wiring connections between the keypad, mini controller, and magnetic lock.
• Klávesnice nereaguje:
  • Check power to the keypad.
  • Ensure the keypad is securely mounted and not tampered s.
• Karta/Klíčtag Not Granting Access:
  • Confirm the card/keytag is properly enrolled in the system.
  • Ensure the card/keytag is presented correctly to the reader.
• Problémy s programováním:
  • Double-check the master code and programming sequence. For many keypads, a * is needed before the master code and a # after it.
  • Refer to the specific programming section of the VIS-3002 user manual.
• Anti-Tamper Alarm: The VIS-3002 keypad features an anti-tamper alarm that activates if the unit is illegally removed or torn down. If this alarm sounds, inspect the keypad's mounting and connections.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or service inquiries, please contact Visionis customer support. Details can typically be found on the Visionis webmístě nebo na obalu produktu.