Uživatelská příručka k bezdrátovému digitálnímu teploměru na maso ThermoPro TP12

1. Úvod

The ThermoPro TP-12 is a digital wireless thermometer designed to accurately monitor the internal temperature of your meat and the temperature of your oven or BBQ. With a remote range of up to 300 feet, this unit allows you to monitor your cooking from a distance, eliminating the need for constant supervision. It features dual probes, a timer, and various alarm functions to ensure your food is cooked perfectly every time.

This manual provides detailed instructions on how to set up, operate, and maintain your ThermoPro TP12 thermometer. Please read it thoroughly before first use.

2. Bezpečnostní informace

• VAROVÁNÍ: Do not touch the stainless steel probes or wires with bare hands during or immediately after cooking, as they will be extremely hot. Always wear heat-resistant gloves.
• Keep the receiver and transmitter away from direct heat sources, open flames, or hot surfaces.
• Do not immerse the receiver or transmitter in water or place them in a dishwasher. They are not waterproof.
• The probes and wires are designed to withstand temperatures up to 716°F (380°C). Do not expose them to temperatures exceeding this limit.
• Ensure the probe cable is not pinched or damaged by oven doors or grill grates.
• Uchovávejte mimo dosah dětí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Přijímací jednotka
• 1 x Vysílací jednotka
• 1 x Food Grade Stainless Steel Probe (6.5 inches)
• 1 x Oven/BBQ Stainless Steel Probe (3 inches)
• 4 x AAA baterie

Image: The ThermoPro TP12 package contents, showing the receiver and transmitter units, two stainless steel probes (one for food, one for oven/BBQ), and a metal clip for the oven probe.

4. Součásti a vlastnosti produktu

Image: The ThermoPro TP12 wireless thermometer system, displaying the receiver unit on the left with its large red display, the transmitter unit on the right, and the two stainless steel probes connected to the transmitter.

Přijímací jednotka

• Zobrazit: Large LCD display showing food and BBQ/oven temperatures, timer, and alarm indicators.
• tlačítka:
  • HI/HR: Adjusts high temperature setting for BBQ/oven, or sets hours for timer.
  • LO/MIN: Adjusts low temperature setting for BBQ/oven, or sets minutes for timer.
  • REŽIM/SVĚTLO: Switches between temperature setting mode and timer mode; activates backlight.
  • SYNCHRONIZOVAT: Synchronizes receiver with transmitter.
  • ZAČÁTEK KONEC: Starts or stops the timer.
  • HI/CL: Adjusts high temperature setting for food.
  • °F/°C: Přepíná mezi stupni Fahrenheita a Celsia.
• Poplach: Flashes and beeps when programmed temperature is reached or connection is lost.

Vysílací jednotka

• Zobrazit: Small LCD display showing current probe temperatures.
• Probe Jacks: Two ports for connecting the food and oven/BBQ probes.
• Vypínač: Vypínač zapnuto/vypnuto.
• Drátěný stojan: Integrated wire stand for tabletop use or hanging on an oven door.

Sondy

• Potravinová sonda: 6.5-inch food grade stainless steel probe with a step-down tip for accurate and fast temperature readings.
• Oven/BBQ Probe: 3-inch stainless steel probe for monitoring ambient temperatures.
• Kabel: 40-inch stainless steel mesh cable, designed to withstand high temperatures.

Obrázek: Detailní záběr view of the 6.5-inch food grade stainless steel probe, highlighting its step-down tip design for improved accuracy and speed in temperature measurement.

5. Pokyny k nastavení

1. Vložte baterie:
   • Open the battery compartment on the back of both the receiver and transmitter units.
   • Vložte 2 baterie typu AAA do každé jednotky a dbejte na správnou polaritu (+/-).
   • Přihrádky na baterie bezpečně uzavřete.
   

   Image: The ThermoPro TP12 receiver and transmitter units, illustrating the battery compartment location and icons representing the receiver's flash and beep alarm, dual temperature monitoring, and the inclusion of 4 AAA batteries.

2. Připojení sond:
   • Plug the food probe into the "FOOD" jack on the transmitter.
   • Plug the oven/BBQ probe into the "BBQ" jack on the transmitter.
3. Zapnutí:
   • Slide the ON/OFF switch on the back of the transmitter to the "ON" position.
   • The transmitter's display will show the current temperatures from the probes.
   • The receiver will automatically synchronize with the transmitter. If not, press and hold the "SYNC" button on the receiver for 3 seconds.

6. Návod k obsluze

6.1 Nastavení teplotních alarmů

1. Vyberte sondu: Press the "MODE/LIGHT" button on the receiver to cycle through "FOOD" temperature setting, "BBQ" high temperature setting, and "BBQ" low temperature setting.
2. Upravit teplotu:
   • For "FOOD" temperature, press "HI/CL" to increase the target temperature.
   • For "BBQ" high temperature, press "HI/HR" to increase the target temperature.
   • For "BBQ" low temperature, press "LO/MIN" to increase the target temperature.
   • The temperature will cycle back to the minimum after reaching the maximum.
3. Potvrdit nastavení: The setting will automatically save after a few seconds of inactivity, or you can press "MODE/LIGHT" again to move to the next setting.
4. When the probe temperature reaches the set alarm temperature, the receiver will flash and beep. Press any button to stop the alarm.

Image: The ThermoPro TP12 system in use, showing the receiver displaying both meat and oven temperatures, with the transmitter placed near an oven, demonstrating its ability to monitor two temperatures concurrently.

6.2 Použití časovače

1. Enter Timer Mode: Press the "MODE/LIGHT" button repeatedly until "TIMER" is displayed on the receiver.
2. Nastavení odpočítávacího časovače:
   • Press "HI/HR" to set hours.
   • Press "LO/MIN" to set minutes.
   • Press "START/STOP" to begin the countdown.
   • To pause, press "START/STOP" again. To reset, press and hold "START/STOP" for 3 seconds.
3. Časovač odpočítávání: If the timer is set to 00:00 and "START/STOP" is pressed, the timer will begin counting up.

Image: The ThermoPro TP12 receiver unit demonstrating its countdown and count-up timer capabilities, showing how the display changes to indicate hours and minutes for timing cooking processes.

6.3 Přepínání teplotních jednotek (°F/°C)

Press the "°F/°C" button on the receiver to toggle between Fahrenheit and Celsius temperature displays.

6.4 Remote Range and Signal Loss

The ThermoPro TP12 offers a remote range of up to 300 feet in open areas. Factors such as walls, obstacles, and electromagnetic interference can reduce this range.

If the receiver loses connection with the transmitter, it will alert you with an alarm. Move the receiver closer to the transmitter to re-establish the connection.

Image: The ThermoPro TP12 in an outdoor grilling scenario, illustrating its 300-foot remote range capability, with the user holding the receiver unit while the transmitter is near the grill.

7. Údržba a péče

• Čištění sond: Wash the stainless steel probes with hot soapy water after each use. Rinse thoroughly and dry completely. Do not immerse the probe connectors or wires in water.
• Čisticí jednotky: Otřete přijímací a vysílací jednotky čisticím prostředkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani je neponořujte do vody.
• Skladování: Pokud teploměr nepoužíváte, skladujte jej na suchém místě při pokojové teplotě. Pokud jej skladujete delší dobu, vyjměte baterie, abyste zabránili vytečení.
• Péče o sondu: Neohýbejte ani nelámejte kabely sondy nadměrně, mohlo by dojít k poškození vnitřního zapojení.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

ThermoPro provides a 1-year warranty for this product from the date of purchase. By registering your product after purchase, you can receive an extended 3-year warranty.

Additionally, ThermoPro offers a lifetime warranty on their sensor probes. If your probe experiences temperature reading problems, a brand-new replacement probe will be provided free of charge.

For warranty claims, technical support, or any questions regarding your ThermoPro TP12 thermometer, please contact ThermoPro Customer Service:

• Telefon: 877-515-7797
• Webmísto: Refer to the official ThermoPro webweb s nejaktuálnějšími kontaktními informacemi a zdroji podpory.

Please have your model number (TP12) and purchase information ready when contacting support.