Electro-Voice ZX1-90

Electro-Voice ZX1-90 8" 200W 2-Way Compact Full Range Passive Loudspeaker User Manual

Model: ZX1-90

Zavedení

The Electro-Voice ZX1-90 is an 8-inch, 200W, 2-way compact full-range passive loudspeaker designed for versatile sound reinforcement applications. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your ZX1-90 loudspeaker. Please read this manual thoroughly before using the product.

Bezpečnostní informace

Always observe the following safety precautions to prevent damage to the loudspeaker or injury to personnel:

  • Manipulace s energií: Do not exceed the rated power handling of 200W to prevent damage to the speaker components.
  • Montáž: Ensure all mounting hardware and structures are capable of safely supporting the weight of the loudspeaker. Follow all local building codes and regulations.
  • Kabeláž: Use appropriate gauge speaker cables and ensure secure connections to avoid short circuits or signal loss.
  • Prostředí: While the enclosure is inherently water resistant, avoid direct exposure to heavy rain or extreme moisture. Do not operate in excessively hot or cold environments.
  • Ochrana sluchu: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use hearing protection when operating the loudspeaker at high volumes.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • Electro-Voice ZX1-90 8" 200W 2-Way Compact Full Range Passive Loudspeaker (1 unit)

Nastavení

Možnosti montáže

The ZX1-90 loudspeaker offers several mounting configurations for various applications:

  • Pole Mount: The enclosure features an integrated pole mount for stand-alone applications using a standard speaker pole.
  • Wedge Angle: The design allows for use as a stage monitor, positioning the speaker at an optimal angle for performers.
  • Vent Mounting: Specific mounting points are available for secure installation. Consult a qualified installer for permanent installations.
Electro-Voice ZX1-90 loudspeaker showing its compact design and various mounting points.

Figure 1: Electro-Voice ZX1-90 loudspeaker, illustrating its compact design and integrated pole mount.

Konektivita

The ZX1-90 is a passive loudspeaker and requires an external amplifier. Connect the loudspeaker to a suitable amplifier using high-quality wired speaker cables. Ensure the amplifier's output impedance matches the loudspeaker's impedance for optimal performance and to prevent damage.

Provozní

Základní operace

Once connected to an amplifier, the ZX1-90 delivers full-range audio. Adjust the amplifier's volume and equalization settings to achieve the desired sound. The loudspeaker features full-bandwidth overload protection, ensuring reliable, long-term operation without audible distortion, even under demanding conditions.

Coverage Flexibility

The ZX1-90 offers a 90°x 50° coverage pattern. The horn can be rotated, allowing for either horizontal or vertical use to optimize coverage for your specific application. This flexibility ensures consistent sound distribution whether the speaker is used upright or on its side.

Údržba

Obecná péče

The ZX1-90 features a molded high-impact polymer enclosure that is extremely durable and inherently water resistant. To maintain its condition:

  • Vyčistěte kryt měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Regularly inspect speaker grilles for any debris or damage.
  • Ujistěte se, že všechna připojení zůstanou bezpečná.
  • Store the loudspeaker in a dry, temperate environment when not in use.

Odstraňování problémů

If you encounter issues with your ZX1-90 loudspeaker, consider the following basic troubleshooting steps:

  • Žádný zvuk: Zkontrolujte všechna kabelová připojení z amplifier to the loudspeaker. Ensure the amplifier is powered on and functioning correctly. Verify the audio source is active.
  • Zkreslený zvuk: Snižte vstupní úroveň na amplifier. Check for damaged cables or connectors. Ensure the ampZáchranný ventil není přetížený.
  • Přerušovaný zvuk: Inspect all connections for looseness. Check for damaged cables.
  • Nízká hlasitost: Potvrďte amplifier's output level is appropriate. Check the impedance matching between the ampzvlhčovač a reproduktor.

If problems persist, consult a qualified audio technician or contact Electro-Voice customer support.

Specifikace

ZnačkaElektro-hlas
Název modeluZX1-90
Číslo modeluZX190
Typ reproduktoruWoofer, Full Range
Velikost reproduktoru8 palce
Průměr basového reproduktoru8 palce
Průměr výškového reproduktoru1 palce
Maximální výstupní výkon reproduktoru200 wattů
Technologie připojeníKabelové
Režim zvukového výstupuMono
Počet zvukových kanálů2.0
Typ montážePole mount, Wedge
Materiál pouzdraPlastic, Fabric/Kevlar (Cone)
BarvaČerný
Úroveň odolnosti proti voděVodě odolný
Specifické použití pro produktCommercial, Compact Sound Reinforcement
Rozměry položky (D x Š x V)12"H x 19"Š x 13"V
Zdroj napájeníElektrický kabel
Kompatibilní zařízeníLaptop, MP3 Player, Smartphone, Tablet, Television

Záruka

The Electro-Voice ZX1-90 loudspeaker comes with a 5letá omezená záruka. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the official Electro-Voice warranty documentation or contact customer support.

Podpora

For further assistance, technical support, or service inquiries, please visit the official Electro-Voice webnebo kontaktujte jejich oddělení zákaznických služeb. Více informací a produktů naleznete také na Electro-Voice Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.