Galcon 8118 AC-GQ8 8-Station Indoor Controller User Manual

Zavedení

The Galcon 8118 AC-GQ8 is an advanced indoor irrigation and low voltage lighting controller designed for efficient management of your watering and lighting systems. This controller supports up to 8 stations, configurable as 8 irrigation zones or 7 irrigation zones plus 1 low voltage lighting zone. It offers flexible programming options including daily, odd, even, and cyclic schedules, along with a dedicated program for low voltage aplikací.

Image: The Galcon 8118 AC-GQ8 controller, showing its grey casing, control panel with LCD display, and a protective cover.

Nastavení a instalace

This section provides instructions for the proper setup and installation of your Galcon 8118 AC-GQ8 controller.

Montáž ovladače

• Select a suitable indoor location away from direct sunlight, extreme temperatures, and moisture.
• Ensure the location allows for easy access to a standard electrical outlet and irrigation valve wiring.
• Use appropriate screws to securely mount the controller to a wall.

Připojení vodičů

• Připojení napájení: Connect the controller to a standard AC power outlet.
• Zapojení ventilu: Connect each irrigation valve's common wire to the controller's common terminal (C). Connect each individual valve's hot wire to its corresponding station terminal (1-8).
• Master Valve/Pump Start Relay (Optional): If using a master valve or pump start relay, connect its common wire to the common terminal and its hot wire to the designated master valve terminal (M).
• Sensor Input (Optional): The controller supports various sensors (rain, temperature, wind, soil). Connect sensor wires to the dedicated sensor terminals as per the sensor's instructions.
• Nízký objemtage Lighting (Optional): Pro nízké objtage lighting applications, a separate relay is required (not included). Connect the relay to the designated low voltage output terminal (X) and common.

Ujistěte se, že všechny spoje jsou bezpečné a izolované, aby se zabránilo zkratům.

Návod k obsluze

This section details how to program and operate your Galcon 8118 AC-GQ8 controller for irrigation and low voltage osvětlení.

Nastavení aktuálního času a data

• Rotate the dial to the "SET CLOCK" position.
• Use the arrow buttons to adjust the time and date.
• Press "ENTER" or rotate the dial to save settings.

Programming Irrigation Programs (A, B, C)

The controller offers three independent irrigation programs (A, B, C) with flexible scheduling options.

1. Vyberte program: Rotate the dial to "PROGRAM A", "PROGRAM B", or "PROGRAM C".
2. Nastavit časy zahájení: Each program can have up to 4 start times. Rotate the dial to "START TIME" and use arrow buttons to set.
3. Set Station Run Times: Rotate the dial to "RUN TIME". Select each station (1-8) and set its irrigation duration from 1 minute to 4 hours.
4. Nastavení dnů zavlažování: Rotate the dial to "WATERING DAYS". Choose from:
   • Denní: Select specific days of the week.
   • Zvláštní: Waters on odd-numbered days.
   • Dokonce: Waters on even-numbered days.
   • Cyclic: Waters every 1 to 31 days. Set the cycle length.

Sezónní úprava

Adjust all program run times simultaneously from 10% to 190% of their set duration.

• Rotate the dial to "SEASONAL ADJUST".
• Use arrow buttons to set the desired percentage.

Funkce zpoždění deště

Temporarily suspend irrigation for up to 240 days.

• Rotate the dial to "RAIN DELAY".
• Use arrow buttons to set the number of delay days.

Nízký objemtage Lighting Program (X)

This program operates independently of irrigation schedules.

• Rotate the dial to "PROGRAM X".
• Set the desired ON/OFF times for the low voltage osvětlení.

Manual Operation / System Test

To manually run a station or test the system:

• Rotate the dial to "MANUAL".
• Select the desired station and set its run time.
• The controller will activate the selected station immediately.

Údržba

Proper maintenance ensures the longevity and optimal performance of your controller.

• Čištění: Otřete vnější povrch ovladače měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Napájení: Ensure the power supply is stable. In areas prone to power surges, consider using a surge protector.
• Bateriová záloha: The controller may use a 9V battery for program retention during power outages. Check and replace the battery annually or as needed.
• Kontrola elektroinstalace: Periodically inspect all wiring connections for corrosion or damage.

Odstraňování problémů

This section addresses common issues you might encounter with your Galcon 8118 AC-GQ8 controller.

If issues persist after following these steps, contact Galcon customer support.

Specifikace

• Číslo modelu: GAEDS2U0258
• Počet stanic: 8 (7 irrigation + 1 low voltage lighting, or 8 irrigation)
• programy: 3 (A, B, C) for irrigation, 1 (X) for low voltage osvětlení
• Časy zahájení na program: Až do 4
• Délka zavlažování: 1 minuta až 4 hodin
• Cyclic Watering: Každé 1 až 31 dní
• Sezónní úprava: 10 % až 190 %
• Zpoždění deště: Až 240 dní
• Vstup senzoru: Compatible with rain, temperature, wind, soil sensors
• Zdroj napájení: AC (details not specified, assuming standard household current)
• Baterie: 1 x 9V battery required (for program retention)
• Rozměry produktu: 6.1 x 19.81 x 25.65 cm
• Hmotnost položky: 680.39 g (1.5 libry)
• Typ displeje: LCD nebo LED
• Barva: Šedá
• Výrobce: Galcon

Záruka a podpora

For information regarding product warranty, technical support, or service, please refer to the official Galcon webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.

Galcon Contact Information: Prosím navštivte www.galcon.co.il pro nejaktuálnější zdroje podpory a kontaktní údaje.