Uživatelská příručka analytické váhy Sartorius Secura224-1S

1. Úvod

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of the Sartorius Secura224-1S Analytical Balance. Designed for high-precision weighing in laboratory environments, the Secura224-1S ensures accurate and reliable measurement results. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste předešli zranění a poškození váhy:

• Operate the balance only in a stable, level, and vibration-free environment.
• Ujistěte se, že napájecí zdroj odpovídá specifikacím uvedeným na váze.
• Nevystavujte váhu extrémním teplotám, vlhkosti ani přímému slunečnímu záření.
• Avoid dropping or subjecting the balance to strong impacts.
• Nepokoušejte se váhu otevírat ani opravovat sami. Servis svěřte kvalifikovanému personálu.
• Keep the balance clean and free from dust and chemical spills.

3. Konec produktuview

3.1 Vlastnosti

• Čitelnost: 0.1 mg for precise measurements.
• Rozsah vážení: Up to 220 g capacity.
• Kryt proti proudění vzduchu: Manual draft shield to minimize air current interference.
• Rozhraní: Mini USB interface for data connectivity.
• Isocal: Internal calibration system for consistent accuracy.

3.2 Komponenty

The Secura224-1S features a robust design with a clear manual draft shield, a high-resolution digital display, and a weighing pan. The draft shield protects the weighing process from air currents, which is crucial for measurements at 0.1 mg readability.

4. Nastavení

4.1 Vybalení a umístění

• Carefully remove the balance from its packaging. Retain packaging for future transport.
• Place the balance on a stable, level, and vibration-free surface, away from direct sunlight, heat sources, and air currents (e.g., vents, open windows).
• Ensure sufficient space around the balance for operation and maintenance.

4.2 Vyrovnání váhy

Pro přesné měření musí být váha dokonale vodorovná.

1. Locate the spirit level (bubble level) on the balance.
2. Upravte vyrovnávací nožičky na základně váhy, dokud se vzduchová bublina nedostane do středu kruhu vodováhy.

4.3 Připojení napájení

• Connect the power adapter to the balance and then to a suitable power outlet.
• Allow the balance to warm up for at least 30 minutes after initial power-on to ensure stable readings.

5. Návod k obsluze

5.1 Základní postup vážení

1. Ensure the draft shield doors are closed.
2. Stiskněte tlačítko ON/OFF tlačítko pro zapnutí váhy.
3. Počkejte, až se na displeji zobrazí „0.0000 g“ nebo stabilní nulová hodnota.
4. Open the draft shield door, carefully place the item to be weighed onto the center of the weighing pan.
5. Close the draft shield door.
6. Wait for the reading to stabilize. The stable weight will be displayed.
7. To tare (zero out the weight of a container), place the empty container on the pan and press the TÁRA button. The display will return to zero. Then add the substance to be weighed into the container.

5.2 Calibration (Isocal)

The Sartorius Secura224-1S features an internal automatic calibration system (Isocal) to ensure optimal accuracy. Regular calibration is essential for precise measurements.

• The balance may perform automatic calibration at set intervals or when environmental conditions change significantly.
• Refer to the on-screen menu or the full technical manual for instructions on initiating manual internal calibration if required.
• During calibration, ensure no items are on the weighing pan and the draft shield is closed.

5.3 Using the Mini USB Interface

The Mini USB interface allows for data transfer to a computer or other compatible devices.

• Connect the balance to a computer using a Mini USB cable (not included).
• Install any necessary drivers or software provided by Sartorius (refer to the official Sartorius website for downloads).
• Follow the software instructions to configure data output and capture weighing results.

6. Údržba

6.1 Čištění

• Před čištěním vždy odpojte váhu od napájení.
• Použijte měkký, damp hadříkem s jemným čisticím prostředkem k čištění vnějších povrchů.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the balance.
• Carefully clean the weighing pan and draft shield components. These parts may be removable for easier cleaning.
• Ensure no liquids enter the internal components of the balance.

6.2 Skladování

When not in use for extended periods, store the balance in a clean, dry, and temperature-controlled environment. Keep the draft shield closed to protect the weighing pan.

7. Řešení problémů

If you encounter issues with your Sartorius Secura224-1S balance, refer to the following common problems and solutions:

For issues not listed here or if problems persist, please contact Sartorius customer support.

8. Specifikace

9. Záruka a podpora

The Sartorius Secura224-1S Analytical Balance is manufactured by Sartorius Corporation. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sartorius webmísto.

For technical support, service, or to inquire about replacement parts, please contact Sartorius customer service directly. Contact information can typically be found on the manufacturer's webwebu nebo v dokumentaci k produktu.