Sauter SPI4362B Induction Hob User Manual

1. Úvod

Thank you for choosing the Sauter SPI4362B Induction Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and keep them for future reference.

2. Bezpečnostní informace

To prevent personal injury or damage to the appliance, observe the following safety precautions:

• Zajistěte, aby spotřebič nainstaloval kvalifikovaný technik v souladu s místními předpisy.
• Nepoužívejte varnou desku, pokud je sklokeramický povrch prasklý nebo rozbitý. Okamžitě ji odpojte od elektrické sítě.
• Keep children away from the appliance during operation and when it is cooling down. Residual heat can cause burns.
• Používejte pouze nádobí vhodné pro indukci.
• Avoid placing metallic objects (e.g., cutlery, lids) on the hob surface as they can heat up.
• Do not store flammable materials near or on the hob.
• Varné zóny po použití vždy vypněte.
• Do not clean the hob with steam cleaners or high-pressure cleaning equipment.

3. Konec produktuview

The Sauter SPI4362B is a 3-zone induction hob designed for built-in installation. It features a black ceramic glass surface and touch controls for precise cooking.

Klíčové vlastnosti:

• 3 indukční varné zóny: Includes a large 28 cm zone with up to 5000W power, and two smaller zones (16 cm and 21 cm).
• 7200W Total Power: Poskytuje efektivní a rychlé vytápění.
• EasyCook Function: Identifies the ideal cooking zone based on cookware diameter, optimizing energy use and heating time.
• Přesné ovládání: Each zone offers 14 cooking positions for fine temperature adjustment.
• 3 Direct Access Shortcuts: Including a Booster function for maximum power. These shortcuts are programmable.
• Centralized Lock: For enhanced safety, preventing accidental changes to settings.
• Indikátor zbytkového tepla: Displays 'H' to warn when a zone is still hot.
• Container Detection: Automatically detects the presence of suitable cookware.

Nad hlavou view of the Sauter SPI4362B induction hob, black ceramic glass, with a stainless steel pan containing chopped vegetables (zucchini, carrots, bell peppers, onions) being stirred by a wooden spoon. The hob features two active cooking zones with illuminated outlines and touch controls visible at the front.

4. Nastavení a instalace

Installation of the Sauter SPI4362B induction hob should only be performed by a qualified electrician or authorized service technician.

Požadavky na instalaci:

• Rozměry výřezu: 560 mm (width) x 490 mm (depth).
• Elektrické připojení: Varná deska vyžaduje samostatný elektrický obvod.
• Napájení: 220-240V, 50/60Hz.
• Maximální výkon: 7.2 kW.
• Current Intensity: 32 A.
• Délka kabelu: 130 cm (supplied without a plug).
• Zajistěte dostatečné větrání kolem spotřebiče.

Refer to the detailed installation diagram provided in the separate installation guide for precise measurements and clearances.

5. Návod k obsluze

5.1. Zapnutí/vypnutí

• To turn on: Press the main power button. The display will show '0' for each zone.
• To turn off: Press the main power button again.

5.2. Selecting a Cooking Zone and Adjusting Power

• Umístěte hrnec vhodný pro indukční ohřev na požadovanou varnou zónu.
• Select the zone by touching its corresponding control.
• Adjust the power level using the '+' and '-' controls or by selecting one of the 14 available positions.
• Použijte Posilovač shortcut for rapid heating.

5.3. EasyCook Function

The EasyCook function (indicated by an Eco label) helps identify the most suitable cooking zone for your cookware. When activated, it guides you to the optimal zone, contributing to faster temperature achievement and energy savings.

5.4. Centralized Lock

Activate the centralized lock function to prevent accidental changes to settings, especially useful when cleaning the hob or to prevent children from operating it. Refer to the control panel for the specific lock button.

5.5. Residual Heat Indicator

After a cooking zone is switched off, an 'H' will appear on the display if the zone is still hot enough to cause burns. Do not touch the surface until the 'H' disappears.

5.6. Container Detection

The hob automatically detects if a suitable pan is placed on the cooking zone. If no pan is detected or if the pan is unsuitable, the hob will not activate or will switch off after a short period.

6. Údržba a čištění

Regular cleaning helps maintain the appearance and performance of your induction hob.

• Always ensure the hob is switched off and cool before cleaning.
• For light soiling, wipe the ceramic glass surface with a damp hadříkem a jemným čisticím prostředkem.
• For stubborn stains or burnt-on food, use a specialized ceramic hob cleaner and a scraper designed for glass surfaces.
• Vyhněte se abrazivním čisticím prostředkům, drátěnkám nebo agresivním chemikáliím, protože by mohly poškrábat nebo poškodit povrch.
• Očistěte ovládací panel měkkým, damp hadříkem. Zajistěte, aby se do ovládacích prvků nedostala vlhkost.

7. Řešení problémů

Pokud se s varnou deskou setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:

For issues not listed here or if problems persist, contact Sauter customer support or a qualified service technician.

8. Specifikace

9. Informace o záruce

Sauter provides a commitment to quality for its products. Spare parts for the SPI4362B model are available for a period of 2 years from the date of purchase. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Sauter customer service.

10. Podpora a kontakt

For technical assistance, service requests, or further information regarding your Sauter SPI4362B Induction Hob, please contact Sauter customer support. Contact details can typically be found on the Sauter official webwebu nebo v dokumentaci k produktu.

When contacting support, please have your model number (SPI4362B) and purchase date readily available.