1. Úvod
Děkuji za nákupasing the WAC Lighting WS-W2717-BZ Spire 17" LED Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Bezpečnostní informace
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení jističem nebo pojistkovou skříní.
- Všechna elektrická připojení musí být v souladu s místními normami a normami NEC (National Electrical Code). Pokud nejste obeznámeni se správným zapojením elektrických vodičů, poraďte se s kvalifikovaným elektrikářem.
- This fixture is intended for outdoor use and must be properly grounded.
- Neinstalujte toto zařízení na povrchy, které nejsou konstrukčně pevné.
- Nepokoušejte se svítidlo upravovat. Jakékoli úpravy mohou vést ke ztrátě záruky a k ohrožení bezpečnosti.
- Handle the glass diffuser with care to prevent breakage.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 x WAC Lighting WS-W2717-BZ Spire 17" LED Outdoor Wall Light Fixture
- Montážní materiál (šrouby, matice atd.)
- Instrukce (tento dokument)
4. Nastavení a instalace
Follow these steps to properly install your WAC Lighting Spire LED Outdoor Wall Light:
- Připravte se na instalaci: Vypněte napájení hlavním jističem nebo pojistkovou skříní, abyste předešli úrazu elektrickým proudem.
- Místo montáže: Select a suitable wall-mount location. The fixture is ADA compliant and features a low-profile design. Ensure the mounting surface is clean and dry.
- Připevněte montážní držák: Secure the mounting bracket (included) to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
- Elektrické připojení:
- Connect the fixture's black wire to the supply circuit's black (hot) wire.
- Connect the fixture's white wire to the supply circuit's white (neutral) wire.
- Connect the fixture's ground wire to the supply circuit's ground wire.
- Secure all connections with wire nuts and ensure no bare wires are exposed. The driver for this LED luminaire is located inside the outlet box.
- Zajistěte přípravek: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and stable.
- Obnovit napájení: Jakmile je svítidlo bezpečně nainstalováno a všechna připojení zkontrolována, obnovte napájení jističem.
Figure 1: Product Dimensions (Side and Front View)
Figure 2: Product Dimensions (Scale Comparison)
5. Návod k obsluze
The WAC Lighting Spire LED Outdoor Wall Light is designed for straightforward operation:
- Zapnutí/vypnutí: The fixture will illuminate when power is supplied to the circuit it is connected to. Use a standard wall switch to control the power.
- Stmívání: This luminaire supports smooth and continuous dimming when used with an electronic low voltage (ELV) dimmer. Ensure your dimmer is compatible with LED fixtures.
6. Údržba
To ensure the longevity and optimal performance of your LED outdoor wall light, follow these maintenance guidelines:
- Čištění: Před čištěním odpojte napájení. Použijte měkký,amp cloth to wipe the exterior of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LED modul: The fixture features a replaceable high-powered LED module with a rated life of 60,000 hours. If replacement becomes necessary, contact WAC Lighting customer support for assistance or qualified service.
- Inspekce: Pravidelně kontrolujte svítidlo, zda nevykazuje známky poškození, uvolněných spojů nebo opotřebení. Veškeré problémy neprodleně řešte.
7. Řešení problémů
If you encounter issues with your WAC Lighting Spire LED Outdoor Wall Light, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Zařízení není napájeno. Uvolněné připojení kabeláže. Vadný spínač. |
Zkontrolujte jistič/pojistku. Zkontrolujte, zda jsou všechna kabelová připojení bezpečná (nejprve vypněte napájení). Test the switch with another device. |
| Světlo bliká nebo ztlumuje nekonzistentně. | Nekompatibilní stmívač. Uvolněné vedení. |
Ensure an ELV dimmer is used and is compatible with LED. Check all electrical connections (power off first). |
| Snížený světelný výkon. | Dirt or debris on diffuser. Aging LED module. |
Clean the glass diffuser. Contact WAC Lighting for LED module replacement. |
If these steps do not resolve the issue, please contact WAC Lighting customer support.
8. Specifikace
| Výrobce | WAC osvětlení |
| Číslo dílu | WS-W2717-BZ |
| Číslo modelu položky | WS-W2717-BZ |
| Rozměry produktu | 4 x 7 x 17 palce |
| Hmotnost položky | 1.65 libry |
| Barva | Bronz |
| Styl | Moderní |
| Materiál | Aluminum, Bronze, Glass |
| Zdroj napájení | Elektrický kabel |
| svtage | 120 Volts (277V option available as special order) |
| Wattage | 27 wattů |
| Typ žárovky | LED (High Powered LED Module) |
| Světelný tok | 1566 lumenů |
| CRI | 90 |
| Teplota barev | 3000 tis |
| Rated Life | 60,000 hodin |
| Typ montáže | Držák na zeď |
| Zahrnuté komponenty | Fixture, mounting hardware, instruction sheet |
9. Informace o záruce
Společnost WAC Lighting poskytuje na tento produkt následující záruku:
- Funkční záruka: 5 roky
- Dokončit záruku: 2 roky
Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, visit the official WAC Lighting webwebu nebo kontaktujte zákaznickou podporu.
10. Podpora
For further assistance, technical support, or to inquire about replacement parts, please contact WAC Lighting directly:
- WAC osvětlení Webmísto: www.waclighting.com
- Refer to the product packaging or the WAC Lighting webstránky s nejaktuálnějšími kontaktními informacemi.