Zavedení
The Timex T129B RediSet Digital Alarm Clock is designed for convenience and reliability, offering dual alarms, a programmable snooze, nap timers, and integrated USB charging ports. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.
Vlastnosti produktu
- Duální budíky: Set two independent alarms for different schedules (e.g., weekdays and weekends).
- RediSet Clock: Automatic time setting upon power connection and time zone selection.
- USB nabíjecí stanice: Features two USB ports (5W for phones, 10W for tablets/quick-charge phones) to charge devices simultaneously.
- Programovatelné odložení: Adjustable snooze duration from 1 to 29 minutes.
- Nap Timers: Convenient feature for short naps.
- Přepínač hlasitosti: Select between soft or loud alarm volume.
- Bateriová záloha: Maintains time and alarm settings during temporary power interruptions (requires 3 AAA batteries, not included).
- Stmívač displeje: Adjustable LED display brightness.
Nastavení
- Připojení napájení: Connect the alarm clock to a 100V-240V universal AC adapter. The RediSet feature will automatically display the correct time.
- Výběr časového pásma: If you are not in the Eastern Time Zone, use the "Time Zone" button (located on the back or top of the unit) to cycle through the available time zones until the correct time is displayed.
- Letní čas (DST): Locate the "DST" switch (usually on the back). Slide it to "+1" to add one hour for Daylight Saving Time, and to "-1" when DST ends.
- Instalace záložní baterie: For battery backup, open the battery compartment (typically on the bottom or back) and insert 3 AAA batteries (not included). Ensure correct polarity. This will preserve time and alarm settings during power outages.

Obrázek: Přední strana view of the Timex T129B alarm clock, showing the digital time display and two front-facing USB charging ports.

Image: Diagram of the Timex T129B alarm clock highlighting features like dual alarm indicators, 0.9" LED display, 3-level dimmer, low battery indicator, 5W USB port for smartphones, 10W USB port for tablets/quick-charge, programmable snooze, nap timers, Daylight Saving Time switch, and loud/soft alarm selector.
Návod k obsluze
Nastavení času
- Stiskněte a podržte NASTAVENÍ ČASU button (usually on the top panel) until the time display flashes.
- Použijte + or - tlačítky pro nastavení hodiny. Věnujte pozornost indikátoru PM.
- Stiskněte NASTAVENÍ ČASU znovu pro přechod na nastavení minut. Použijte + or - nastavit minuty.
- Stiskněte NASTAVENÍ ČASU ještě jednou pro potvrzení a ukončení režimu nastavení času.
Nastavení alarmů (Alarm 1 a Alarm 2)
The clock features two independent alarms. The process is identical for both.
- Stiskněte a podržte POPLACH 1 or POPLACH 2 tlačítko , dokud nezačne blikat čas budíku.
- Použijte + or - buttons to adjust the alarm hour. Observe the PM indicator.
- Stiskněte příslušné POPLACH button again to move to minute adjustment. Use + or - nastavit minuty.
- Stiskněte tlačítko POPLACH button one more time to confirm and activate the alarm. An indicator light (ALM 1 or ALM 2) will illuminate on the display.
- Chcete-li vypnout aktivní budík, stiskněte odpovídající tlačítko POPLACH jednou tlačítko. Indikátor alarmu zhasne.
Funkce Snooze
Když zazní alarm, stiskněte velké SNOOZE / DISPLAY DIMMER bar to temporarily silence the alarm. The alarm will sound again after the preset snooze duration.
- Programovatelné odložení: To adjust the snooze duration (1-29 minutes), refer to the detailed instructions in the full owner's manual.
Nap časovač
The nap timer allows for a short, temporary alarm without affecting your main alarm settings.
- Stiskněte tlačítko ZDŘÍMNUTÍ tlačítko. Na displeji se zobrazí výchozí doba zdřímnutí (např. 5 minut).
- Použijte + or - buttons to adjust the nap duration.
- The nap timer will start automatically after a few seconds or by pressing ZDŘÍMNUTÍ znovu.
- To cancel the nap timer, press RESET ALM.
Zobrazit stmívač
Adjust the brightness of the LED display to your preference.
- Stiskněte tlačítko SNOOZE / DISPLAY DIMMER bar (when no alarm is sounding) to cycle through different brightness levels.
USB nabíjení
The clock provides two USB ports for charging your electronic devices.
- Port označený TELEFONY (5W) is suitable for charging smartphones.
- Port označený PHONES/TABLETS (10W) offers faster charging for tablets and quick-charge compatible smartphones.
- Simply connect your device's USB charging cable to the appropriate port on the front of the alarm clock.
Video: An official product video from SDI Technologies, Inc. demonstrating the Timex Alarm Clock with USB Charging Station, RediSet Digital features, including dual USB ports for charging devices and automatic time setting.
Údržba
- Čištění: Hodiny otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Výměna baterie: When the "BATT LOW" indicator appears, replace the 3 AAA backup batteries. Use a paper clip to open the battery compartment, replace the batteries, and ensure the compartment is securely closed.
- Napájecí kabel: Ujistěte se, že napájecí kabel není přiskřípnut nebo poškozen.
Odstraňování problémů
| Problém | Řešení |
|---|---|
| Displej hodin je prázdný. | Ensure the AC adapter is securely plugged into a working power outlet. Check if there was a power outage. If using battery backup, ensure batteries are fresh and correctly installed. |
| Alarm se nespustí. | Verify that the alarm (ALM 1 or ALM 2) is activated (indicator light on). Check the alarm volume setting (LOUD/SOFT switch). Ensure the alarm time is set correctly (AM/PM). |
| Nabíjení přes USB nefunguje. | Ensure the clock is powered on. Check the USB cable for damage and ensure it's properly connected to both the clock and your device. Try a different USB port or device to isolate the issue. |
| Time is incorrect after power connection. | Use the "Time Zone" button to select your correct time zone. Adjust the "DST" switch if Daylight Saving Time is active. |
Specifikace
- Model: T129B
- Značka: Timex
- Typ displeje: Digitální LED
- Zdroj napájení: AC Adapter (100V-240V), 3 AAA batteries for backup (not included)
- USB porty: 1x 5W (for phones), 1x 10W (for tablets/quick-charge phones)
- Rozměry produktu: 6.42 cm Š x 3.03 cm V
- Hmotnost položky: 8.8 unce
- Materiál: Plast
- Výrobce: SDI Technologies, Inc.
Záruka a podpora
For warranty information and technical support, please refer to the complete owner's manual included with your product or visit the official Timex webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.
Zahrnuté komponenty: Návod k obsluze





